http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김두산 ( Kim Doo-san ),김동환 ( Kim Dong-hwan ),김민준 ( Kim Min-jun ),이용준 ( Lee Yong-jun ),김형국 ( Kim Hyeong-gook ),김길희 ( Kim Kil-hee ) 한국구조물진단유지관리공학회 2019 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.23 No.1
In this study, an experiment was conducted to evaluate the behavior of fiber reinforced concrete beam according to GFRP(Glass Fiber Reinforced Polymer)sheets and based on previous specimens and directly compare the fiber reinforcing effect. As a result, all specimens, regardless of the cross section shape, had an increase in torsional capacity and similar behavior compared to previous study.
Newmark & Hall의 응답스펙트럼을 이용한 완전탄소성 구조물의 내진성능 및 요구감쇠비 산정법
김형국(Kim, Hyeong-Gook),김길희(Kim, Kil-Hee) 대한건축학회 2016 大韓建築學會論文集 : 構造系 Vol.32 No.2
An estimation method for seismic performance and damping requirement of elastic perfectly plastic structures is proposed in this paper. To assess the seismic performance of structures without iterative analysis and non-convergence problems of the capacity spectrum method, the capacity curve and the demand spectrum are assumed to be functions of the ductility factor. The damping requirement to achieve a prescribed performance target is evaluated using the relationship between the amplification factors in Newmark & Hall’s response spectrum and a prescribed inelastic displacement. Time history response analysis is carried out and the results are compared with those obtained using the proposed method to confirm its validity. The analytical results shown that, if the ductility value is less than 6 for elastic perfectly plastic structures, the proposed method is effective at estimating seismic performance and damping requirement of structures, using a single process during the preliminary design phase for building structures or damping devices.
김형국,김우범,김원기,Kim, Hyeong Gook,Kim, Woo Bum,Kim, Won Ki 한국강구조학회 2008 韓國鋼構造學會 論文集 Vol.20 No.2
SC 구조는 시공 및 제작성이 우수하여 최근 국내외 원자력 발전소 건설에 적용되고 있는 구조이다. SC 구조의 벽 -바닥 접합부가 갖는 전단력 전달기구를 확인하기 위하여 4개의 실험체에 대하여 실험을 수행하고, 접합부의 거동특성을 분석하였다. 이를 바탕으로 접합부의 전단내력 평가를 위한 해석적 연구를 수행하였다. 그 결과, 실험 결과와 해석결과 간의 근접성을 확인하였고, 접합부의 내력 및 파괴모드를 도출하였다. 그리고 전단플레이트의 두께와 벽면 마찰력의 변화가 접합부 전단내력에 미치는 영향을 파악한 결과, 제안한 접합부 내력식이 보수적인 값을 제시하고 있음을 확인하였다. Steel plate-concrete (SC) structure has recently been used in nuclear power structure because of its construction efficiency. In this study, experimental and analytical study to investigate the behavior of the SC structure's wall slab connection was carried out. Experiments were performed for typical SC and RC connections in order to examine the basic difference between each structure. Finite element analysis was performed and the result of the analysis was found to closely reflect the experimental result. By varying the thickness of the shear plate and friction coefficients and the distance of applied load from the wall, the influence of the parameters on the joint strength and failure modes were examined. Finally, it was confirmed that the joint strength formula proposed in th this research gives conservative results.
중공 및 중실에 따른 철근콘크리트 부재의 비틀림 최대내력평가
김민원 ( Kim¸ Min-won ),김준구 ( Kim¸ Jun-gu ),이가영 ( Lee¸ Ga-yeong ),김형국 ( Kim¸ Hyeong-gook ),김길희 ( Kim¸ Kil-hee ) 한국구조물진단유지관리공학회 2023 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.27 No.2
이 연구에서는 최근 늘어나는 중공 단면 부재의 비틀림을 평가하기 위하여 중공(Hollow) 및 중실(Solid)을 변수로 RC 부재에 대한 비틀림 최대 내력(T<sub>n</sub>)과 에너지 소산 능력을 비교하였다. 비틀림 최대 내력은 중실 실험체가 중공 실험체보다 약 4.5% 높게 나타났으며, 에너지 소산 능력은 중실 실험체가 중공 실험체보다 약 3% 높게 나타났다. 이를 통해 중공형태의 부재는 비틀림 최대 내력과 에너지 소산 능력에 대한 영향이 미미한 것을 확인하였다.