http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김현수,이의수,박동우,이일민,문기원,최다혜,신준환,김무건,최경선,박경현,Kim, H.S.,Lee, E.S.,Park, D.W.,Lee, I.M.,Moon, K.,Choi, D.H.,Shin, J.H.,Kim, M.G.,Choi, K.S.,Park, K.H. 한국전자통신연구원 2019 전자통신동향분석 Vol.34 No.3
The bandwidth of wireless communication is expected to grow exponentially due to the expansion of mobile devices and the increase of real-time and realistic multimedia services. Recently, the studies on terahertz band wireless communication have been actively conducted for the next generation communication after 5G wireless communication. The terahertz band, which is the unallocated frequency band, has been applied to the non-contact, non-destructive quality inspection industry such as the terahertz imaging and spectral systems through the development of terahertz generating and detecting components. This article briefly describes recent research trends on terahertz wireless communication technologies and introduces the details of photonics-based terahertz devices and systems that have been focused on the Terahertz Basic Research Section of Electronics and Telecommunication Research Institute.
김동우(D.W.Kim),김현수(H.S.Kim) 한국자동차공학회 1999 한국자동차공학회 춘 추계 학술대회 논문집 Vol.- No.-
In this paper. a static control strategy of CVT speed ratio is investigated. In order to operate the engine on the optima] operating region corresponding to the driver ’ s desire and the driving condition. a fuzzy control logic is used. In the fuzzy controller, S_factor is suggested which is defined as a degree of sportiness for the normal driving. Also. L_factor is suggested which determines the engine brake capacity for coating ‘<br/> Simulation results show that the fuzzy controller designed in this work selects the optimal driving mode automatically for the driver' s demand and driving condition
자장강화된 유도결합형 플라즈마를 이용한 산화막 식각에 대한 연구
안경준(K. J. An),김현수(H. S. Kim),우형철(R. Woo),유지범(J. B. Yoo),염근영(G. Y. Yeom) 한국진공학회(ASCT) 1998 Applied Science and Convergence Technology Vol.7 No.4
본 연구에서는 자장강화된 유도결합형 플라즈마를 사용하여 이 플라즈마의 특성을 조사하고 또한 산화막 식각에 미치는 영향에 대하여 조사하였다. 자장 강화를 위해 4쌍의 영구자석이 사용되었고, 산화막 식각을 위해 C₂F_6, CHF₃, C₄F_8 가스 및 이들 혼합가스가 사용되었으며 첨가가스로 H₂를 사용하였다. 자장강화된 유도결합형 플라즈마 특성 분석을 위해 Langmuir probe 와 optical emission spectrometer를 이용하였으며 산화막 식각 속도 및 photoresist에 대한 식각 선택비를 stylus profilometer를 이용하여 측정하였다. 이온 밀도에 있어서 자장 유무에 따른 큰 변화는 관찰되지 않았으나 이온전류밀도의 균일도는 자장을 가한 경우 웨이퍼가 놓이는 기판 부분에서 상당히 증가된 것을 알 수 있었다. 또한 자장이 가해진 경우, 자장을 가하지 않은 경우에 비해 플라즈마 전위가 감소된 반면 전자온도 및 라디칼 밀도는 크게 증가되는 것을 알 수 있었으며 산화막 식각시에도 높은 식각 속도와 식각 균일도를 보였다. 산화막 식각을 위해 수소가스를 사용한 가스조합중에서 C₄F_8/H₂가스조합이 가장 우수한 식각 속도및 photoresist에 대한 식각 선택비를 나타내었으며 공정변수를 최적화 함으로써 순수 C₄F_8에서 4이상의 선택비와 함께 8000 Å/min의 가장 높은 식각속도를 얻을 수 있었으며, 50%C₄F_8/50%H₂에서 4000 Å/min의 산화막 식각 속도와 함께 15이상의 식각 선택비를 얻을 수 있었다. In this study, the effects of multi-dipole type of magnets on the characteristics of the inductively coupled plasmas and SiO₂ etch properties were investigated. As the magnets, 4 pairs of permanent magnets were used and, to etch SiO₂, C₂F_6, CHF₃, C₄F_8, H₂, and their combinations were used. The characteristics of the magnetized inductively coupled plasmas were investigated using a Langmuir probe and an optical emission spectrometer, and SiO₂ etch rates and the etch selectivity over photoresist were measured using a stylus profilometer. The use of multi-dipole magnets increased the uniformity of the ion density over the substrate location even though no significant increase of ion density was observed with the magnets. The use of the magnets also increased the electron temperature and radical densities while reducing the plasma potential. When SiO₂ was etched using the fluorocarbon gases, the significant increase of SiO₂ etch rates and also the increase of etch uniformity over the substrate were obtained using the magnets. In case of gas combinations with hydrogen, C₄F_8/H₂showed the highest etch rates and etch selectivities over photoresist among the gas combinations with hydrogen used in the experiment. By optimizing process parameters at 1000 Watts of inductive power with the magnets, the highest SiO₂ etch rate of 8000 Å/min with the etch selectivity of 4 could be obtained for 100% C₄F_8 and the highest etch selectivity of over 15 with the SiO₂ etch rate of 4000 Å/min could be obtained for 50% C₄F_8/50% H₂.
수술후 잔위에서 Helicobacter pylori의 분포와 조직학적 위염 정도의 상관성
서정인 ( J. I. Seo ),박광하 ( K. H. Park ),김현수 ( H. S. Kim ),박동훈 ( D. H. Park ),김문영 ( M. Y. Kim ),백순구 ( S. K. Baik ),이동기 ( D. K. Lee ),권상옥 ( S. O. Kwon ) 대한소화기학회 2002 대한소화기학회 춘계학술대회 Vol.2002 No.-
<목적> 위부분절제술 후 약 60-100%에서 알카리 역류성 위염이 발생하며 주로 문합부에 발생되고 분문부에는 발생 빈도가 적은 것으로 알려져 있다. 이러한 잔위염의 발생에는 담즙의 역류가 관여하여 Helicobacter pylori의 역할에 대하여는 논란이 있다. 본 연구는 위부분절제술 후 잔위에서 H. pylori의 분포와 감염 여부에 따른 위염 정도의 상관성을 알아보고자 하였다. <방법> 2001년 2월부터 8월까지 원주기독병원 소화기내과에 내원한
골밀도 변화에 따른 cage와 나사를 이용한 추체간 유합술의 유한요소 해석
김현수,박정호,Kim H. S.,Park J. H. 대한의용생체공학회 2004 의공학회지 Vol.25 No.6
Cage와 나사를 이용하여 유합된 추체의 3차원 유한 요소 모델을 제작하여, 골밀도의 변화에 따른 골다공증과 cage의 위치 변화에 대해, Von-Mites 최대 응력과 최대 변형량을 살펴보았다. 그 결과 해면골의 강도가 증가함에 따라서, 피질골의 응력은 감소하고, 해면골에서의 응력은 증가하였다. 또한 cage의 위치의 변화에 따라서 추체의 응력 분포의 양상이 달라짐을 알 수 있었으며, 이를 통해 수술의 성공도를 높이고자 한다. Three dimensional finite element models of lumbar interbody fusion using rage and screws were constructed for the simulation of stress distribution and maximum displacement. It is also performed to investigate the efforts of osteoporosis and the location of cage on the stress distribution. It is known from the results that the increase of the strength of trabecular bone causes to decrease the stress of cortical bone and to increase the stress of trabecular bone. And it is found that the trend of stress distribution is changed by the change of location of cage and proper location of cage enhances the rate of operational success.
생사연감검사(生絲練減檢査)에 관(關)한 기초시험(基礎試驗)
김현수 ( H. S. Kim ),이덕로 ( D. R. Lee ),김영진 ( Y. J. Kim ) 한국잠사학회 1971 한국잠사곤충학회지 Vol.13 No.1
1. 연감시료량의 적정량을 알아보기 위해 200, 100, 50, 20, 10gr의 생사시료를 연감 검사한 결과 각 처리간에는 통계적 차이를 인정할 수 없었으나 실제로 시료량의 과대 과소에 따른 측정 및 처리오차를 감안할 때 100gr 시료가 적정량이었다. 2. 섬도사를 이용하여 연감검사를 할 경우 꼬인 상태와 풀은 상태로 연감처리 할 경우 탄산나트륨같이 제교력이 강한 정연제에서는 차이가 없었으나 Marseilles 비누같이 제교력이 약한 것은 연감율에 있서 현저한 차이가 있었다. 3. 5종의 정연제를 비교한 결과 합성세제와 국산 Marseilles비누와 통계적 유의차를 인정 할 수 없으므로 이와의 대체 이용이 가능하다. 4. 정연제의 제교력은 대체로 정연액의 PH가 클수록 크고 작을수록 작은 경향이 있다. 1. To study proper sample size in boiling-of test, we extracted samples in size of 200, 100, 50, 20, and 10 grams and tested them. In the result of this test we couldn`t find a statistical significance among them, but it is seemed that the proper sample size is 100 gram to think about the errors of measurement and treatment when the sample size is either too little or too much in ordinary test. 2. We tested boil-of result by twisted sample skein (sizing skein) and untwisted sample. In this test to use sodium carbonate (Na2CO3) having powerful sericin dissolving power as a scouring agent, boil-off percents made no statistical significance between two kinds of sample skein. And to use marseilles soap having less powerful sericin dissolving power as a scouring agent, boil-off percents made a difference between twisted and untwisted sample skein. 3. We compared five kinds of scouring agent, for example sodium carbonate, monogen, synthetic detergent (HiTi), marseilles soap A (made in Japan) and marseilles soap B (made in Korea). Among them synthetic detergent and marseilles soap B showed no statistical significance compared with marseilles soap A which we used in ordinary boil-off test. So synthetic detergent and marseilles soap B can be substituted for marseilles soap A. 4. Generally the higher pH value of boil of solution, tile more sericin dissolution, showed and vice versa.