http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Design of spectrum spreading technique applied to DVB-S2
김판수,장대익,이호진,Kim, Pan-Soo,Chang, Dae-Ig,Lee, Ho-Jin Korea Society of Satellite Technology 2007 한국위성정보통신학회논문지 Vol.2 No.2
Spectrum spreading, in its general form, can be conceived as an artificial expansion of the signal bandwidth with respect to the minimum Nyquist band required to transmit the desired information. Spreading can be functional to several objectives, including resilience to interference and jammers and reduction of power spectral density levels. In the paper, signal spreading is manly used for increasing the received energy, thus satisfying link budget constraints, for terminals with low aperture antennas, without increasing the transmitted EIRP. As a matter of fact, in many mobile scenarios, even when MODCOD configurations with very low spectral efficiency (i.e. QPSK-1/4) in DVB-S2 standard, are used, the link budget cannot be closed. Spectrum spreading has been recently proposed as a technique to improve system performance without introducing additional MODCOD configurations under the constraint of fixed power spectrum density level at the transmitter side. To this aim, the design of spectrum spreading techniques shall keep into consideration requirements such as spectrum mask, physical layer performance, link budget, hardware reuse, robustness, complexity, and backward compliance with existing commercial equipments. The proposed implementation allows to fully reuse the standard DVB-S2 circuitry and is inserted as an 'inner layer' in the standard DVB-S2 chain. 일반적으로 대역확산기술은 원하는 전송신호에서 요구되는 최소 나이퀴스트 대역과 관련하여 신호 대역의 인위적인 확산하는 것으로 인식된다. 대역확산은 재밍, 간섭 등의 탄력성, 신호전력의 감소 등 여러목적으로 사용된다. 본 논문에서는 대역확산은 작은 안테나, 송신 EIRP 증가없이 수신신호의 에너지를 증가시키고 링크버짓의 제한을 만족시키기 위함이다. 실제로 많은 이동환경 시나리오에서 DVB-S2 표준의 낮은 대역폭당 전송효율 형태의 전송형태에도 링크버짓을 만족시키지 못할 수 있다. 대역확산기술은 송신단의 전력제한환경하에 기존의 DVB-S2의 새로운 전송형태의 추가없이 시스템성능을 만족시킬수 있는 기법이다. 이러한 목표를 위해 대역확산기술의 설계는 스펙트럼 형상, 물리계층 성능, 링크버짓, 하드웨어 재사용, 강인성, 복잡도, 존재하는 사용 모듈과의 호환성등이 고려된다. 제한된 기법의 구현은 현재 DVB-S2 를 완전히 만족시키는 것이 가능해진다.
아크릴계 점착제의 제조와 가교물성에 대한 모노머의 영향
김판수 ( Pan Soo Kim ),이원기 ( Won-ki Lee ) 한국접착및계면학회 2016 접착 및 계면 Vol.17 No.2
본 연구에서는 아크릴 접착제의 물성에 대한 주 모노머의 영향을 비교하기 위하여 2-ethylhexylacrylate 대신에 butyl acrylate를 사용하여 acrylic acid와 2-hydroxyethyl methacrylate의 공중합체를 합성하고 2종의 경화제를 이용하여 접착 물성을 연구하였다. 선형의 측쇄사슬을 가진 butyl acrylate계 점착제는 가지형태의 측쇄를 가진 2-ethylhexyl acrylate계 접착제에 비해 낮은 접착특성을 보였다. 경화제의 경우 가교점이 많고 가교반응을 통해 유연한 ether나 ester그룹을 생성하는 epoxy형 경화제에서 우수한 물성을 보였고 관능기인 산의 농도가 높을수록 접착특성이 향상되는 것을 관찰하였다. This study was to investigate the effect of main monomer, butyl acrylate instead of 2-ethylhexyl acrylate, of acrylic PSAs on adhesive properties. The copolymers of butyl acrylate, acrylic acid and 2 hydroxyethyl acrylate were synthesized and their adhesive properties were investigated after crosslinking with two different agents. Comparing to 2-hydroxyethyl acrylate-based one which has branch-like side groups, butyl acrylate-based PSA with linear side groups show poor adhesive properties. In case of crosslinking agent, epoxy- typed agent than isocyanate-typed one showed better properties than isocyanate-typed one because epoxy- typed agent has more crosslinking sites and produces more flexible bonds, ester and ether, than isocynate- typed one. Most adhesive properties of PSAs were increased with acid content
점감포기에 의한 바실러스 특성을 이용한 폐수의 유기물질 및 질소, 인 처리에 관한 연구
김판수(Kim, Pan-Soo),이상호(Lee Sang-Ho) 한국산학기술학회 2007 한국산학기술학회논문지 Vol.8 No.4
본 연구는 하 · 폐수 중의 유기물뿐만 아니라 질소, 인을 생물학적으로 제거하기 위하여 Bacillus sp 미생물을 사용하였다. Bacillus sp. 미생물이 생존하기에 알맞지 않은 상황에서는 포자를 형성하고, 증식과 포자화를 반복하면서 우점화되는 특성을 발현시키기 위해 점감포기를 실시하였다. 반응기 용존산소 농도는 포기조 1단; 1.2~1.5 ㎎/L, 포기조 2단; 0.3~0.5㎎/L, 포기조 3단 ; 0.2㎎/L이하로 유지하였다. 또한 공정내 미생물의 유실을 방지하고 미생물이 고농도 상태로 유지 가능한 부착성장의 한 공법인 RBC에 끈상 나선형 미생물 접촉재를 설치한 반응기를 이용하였다. 식종한 Bacillus sp.가 적응하는 기간에서의 유입유량은 173 L/d, 내부반송율 200%, 슬러지반송율 100%로 운전을 하였으며, 방류수질을 기준으로 단계적으로 유입유량을 증가시켰다. 정상상태에서 유입유량은 346 L/d이고, 내부반송율과 슬러지 반송율은 각각 50%로 결정하여 실험을 수행하였고, 원수는 Glucose 1,800 ㎎/L, NH₄Cl 500 ㎎/L, KH₂PO₄ 5㎎/L를 혼합한 인공폐수를 제조하여 공정에 주입하였고, 그 결과 각각 미생물이 폐수에 적응하는 단계인 Period 1에서는 각 수질 분석 항목의 농도가 점차적으로 감소하는 경향을 보였으며, 정상상태라고 판단한 Period 2에서는 최종적으로 유입수에 대한 유출수의 제거율은 각각 TCODCr 94%, BOD 87%, T-N 85%, T-P 89%의 결과를 나타내었다. This study was conducted to investigate an aeration tank with RBC process attached Bacillus sp. known as a suitable microorganism for the removing of organic carbon, nitrogen and phosphorus. An aeration tank was based on tapered aeration because Bacillus sp. was well grown in this like environment conditions. The biofilm process with Bacillus sp. as an advanced treatment process could be a best technology for the prominent removal of organic carbon, nitrogen and phosphorus if the mechanism in the process is verified. The operation conditions of DO in the tapered aeration tank were maintained as 1.2~1.5 ㎎/L in aeration tank1, as 0.3~0.5 ㎎/L in aeration tank 2 and less than 0.2 ㎎/L in aeration tank 3, respectively. Lab-scale experiments were conducted, at room temperature, internal recycle rate was from 200% to 50% and returned sludge rate was from 100% to 50%. As a result, concentration of organic carbons, nitrogen and phosphorus in Period 1 (the time of Bacillus sp. adapted to environment) were decreased gradually. Ultimately, each removal rate in this biological experiment were TCODCr 94%, BOD 87%, T-N 85%, T-P 89% in Period 2. Hence, this process showed an excellent performance of the removal of organic carbon, nitrogen and phosphorus and this is an effective system for treating of wastewater.
미생물 접촉재를 이용한 고농도 유기폐수의 유기물 및 질소 · 인 제거
김판수(Kim, Pan-Soo),손한형(Son, Han-Hyung),이상호(Lee Sang-Ho) 한국산학기술학회 2007 한국산학기술학회 학술대회 Vol.- No.-
본 연구는 하 · 폐수 중의 유기물뿐만 아니라 질소, 인을 생물학적으로 제거하는 실험을 수행하였다. 공정 내 미생물의 유실을 방지하고 미생물이 고농도 상태로 유치 가능한 부착성장의 한 공법인 RBC에 끈상 나선형 미생물 접촉재를 설치한 반응기를 이용하였다. 원수는 Glucose 1,800 mg/L, NH₄Cl 500 mg/L, KH₂PO₄ 5mg/L를 혼합한 인공폐수를 제조하여 공정에 주입하였고, 그 결과 각각 미생물이 폐수에 적응하는 단계인 Period 1에서는 각 수질 분석 항목의 농도가 점차적으로 감소하는 경향을 보였으며, 정상상태라고 판단한 Period 2에서는 최종적으로 유입수에 대한 유출수의 제거율은 각각 TCODcr 94%, BOD 87%, T-N 85%, T-P 89%의 결과를 나타내었다.