http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김철환,채원탁 한국강구조학회 2002 韓國鋼構造學會 論文集 Vol.14 No.5
beam of composite structure composed of the RC structure in the end part and steel structure in thecentral part were investigated during cyclic loading, in order to evaluate strength, stifness, and deformational capacity. The parameters used in this study include the amount of reinforced steel bar between the steel beam and RC structure and the existence of the sticking plate. Test results showed that all specimens had stabilized hysteresis loops. Likewise, the specimens with sticking plate had higher load-carrying capacity compared with the one without it. In addition, the stifness of the composite structure was higher than the steel structure. All specimens also showed good rotational capacity. 본 연구에서는 단부 철근콘트리트구조와 중앙부 철골구조로 이루어진 복합구조 보를 대상으로 내력 및 강성 , 변형능력을 평가하기 위해 반복재하 실험을 행하였다 . 주된 실험변수는 철근콘크리트와 철골보의 이종구조 이음부부의 응력전달을 위해 철골보에 접합되는 철근의 개수와 단부 콘크리트를 구속하여 강성을 상승시킬 목적으로 설치되는 부착판의 설치유무이다 . 실험결과 모든 실험체가 방추형의 이력 거동을 나타내며 안정된 거동을 하였으며 , 내력에 있어서는 부착판 설치 실험체의 경우가 기본형 실험체 보다 높게 나타났다 . 또한, 강성에 있어서도 단부에 부착판을 설치한 실험체가 설치하지 않은 실험체에 비하여 보다 높게 나타났으며 , 모든 실험체가 최대 내력시의 부재각이 0.03rad..
김철환,Kim, Cheol-Hwan 한국방위산업진흥회 2000 國防과 技術 Vol.- No.252
한국의 TMD 참여문제는 실효성 문제, 경제적인 문제, 기술적인 문제 등으로 볼 때 유보하는 것이 바람직하다고 생각된다. 따라서 북한의 탄도 미사일에 대한 방어체계 구축은 동맹국의 TMD 체계와 상호 운용성을 보장할 수 있으며, 주변국으로부터 군비 확충에 대한 의심을 불식시킴과 동시에 한국적 여건에 가장 적합한 미사일방어체계(KAMD:Korea Air and Missile Defense)에 대한 개념연구의 선행이 필요하다.
김철환,하삼철,김은필,김경천 대한설비공학회 2000 설비공학 논문집 Vol.12 No.9
An experimental study and a modeling are peformed to investigate the pressure drop of combining junctions in two-phase flows. Experiments on tripod geometry used in a condenser or an evaporator, are conducted with inlet mass fluxes from 200 to$ 400 kg/m^2$</TEx>s, and pipe diameters of 7 m and 9.52 m. The working fluid is R22. The result shows that the pressure drop increases as the quality does, but the effect of the increase of the pressure decreases when the diameter of a pipe increases. When the mass flux increases, the pressure drop linearly does. Furthermore, when the pipe diameter decreases, the pressure drop has a quadratic increase.