http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김준수,윤호성,김성돈,김철주,이진영,Kim Joon-Soo,Yoon Ho-Sung,Kim Sung-Don,Kim Chul-Joo,Lee Jin-Young 한국자원리싸이클링학회 2004 資源 리싸이클링 Vol.13 No.4
본 연구에서는 국내 홍천산 모나자이트 정광의 가성소다 분해 및 분해산물의 염산 침출에 대한 처리조건을 확립하고자 하였다. 분해 반응의 조건은 입자크기의 -200 mesh 이하이면 적절하였고, 반응온도 $460^{\circ}C$부근에서 원활한 분해가 이루어 졌으며, 가성소다 첨가량은 NaOH/TREO mole ratio 6정도가 효과적이다. 또한 침출반응의 조건은 염산농도 8N 및 반응온도 $80^{\circ}C$이상이 침출에 적절하였으며, 반응시간 2시간 및 광액 농도 10%가 효과적이다. 그리고 최적조건하에서 모나자이트의 분해 침출율은 90%이상이였고, 부산물 형태로 인산소다 화합물은 효과적으로 회수하였으며, 희토류 원소별 분리에 적합한 시료용액을 조제하였다. In this study, treatment conditions for monazite concentrate in Hong-Cheon area deposit were studied with NaOH fritting decomposition and HCl leaching experiments. At condition of NaOH fritting decomposition, it was appropriate to adopt particle size of -200 mesh monazite, reaction temperature of about $460^{\circ}C$ and NaOH/TREO mole ratio of 6. In case of HCl leaching for decomposed product, it was appropriate to use hydrochloric acid of above 8N with leaching temperature of above $80^{\circ}C$, leaching time of 2 hrs and pulp density of about 10%. A rate of decomposition and leaching for monazite was above 90% under optimum conditions. Sodium phosphate compound was effectively recovered from NaOH decomposed solution, and mixed rare earth chloride solution was prepared with HCl leaching of decomposed product.
김준수,김창진,하상수,김정훈,이정교,권병덕,홍성관,이기업,이봉재,김용재,최충곤,이호규,Kim, Joon Soo,Kim, Chang Jin,Ha, Sang Soo,Kim, Jung Hoon,Lee, Jung Gyo,Kwun, Byung Duk,Hong, Sung Kwan,Lee, Ki Up,Lee, Bong Jae,Kim, Yong Jae,Choi, Choo 대한신경외과학회 2001 Journal of Korean neurosurgical society Vol.30 No.5
Objective : We analyzed the clinical and endocrinological results of the transsphenoidal microsurgery for ACTH secreting pituitary adenomas. Marerials and Methods : From October 1995 to August 2000, 18 patients underwent transsphenoidal microsurgery for Cushing's disease. We analyzed the surgical results of 17 patients, one patient who was previously operated from other hospital was excluded. Age of the patients were 18 to 61 years old(mean 37.7), male to female ratio was 1 : 3.3, and follow-up period was 3 to 50 months(mean 20.3). The selection of candidates for transsphenoidal exploration was based on endocrinologic criteria. Magnetic resonance imaging was the preferred radiologic test. Selective inferior petrosal sinus sampling of adrenocorticotropic hormone futher refined the diagnosis when endocrinologic and radiologic procedures were not definitive. Results : Results of the preoperative endocrinological test were : level of serum ACTH 29.4 to $225{\mu}g/dL$(mean $93.88{\mu}g/dL$) ; serum cortisol 11.9 to $47.5{\mu}g/dL$(mean $27.49{\mu}g/dL$) ; 24-hour urine free cortisol 235 to $1019{\mu}g/day$(mean $571.0{\mu}g/day$). Inferior petrosal sinus sampling for ACTH was performed in 11 patients and all were confirmed by Cushing's disease and we could predict the laterality of the tumor in 9 of 11 patients. We performed transsphenoidal selective adenomectomy in 5 patients, adenomectomy and subtotal hypophysectomy in 2 patients, adenomectomy and partial hypophysectomy in 9 patients, and in the remaining one patient, hemihypophysectomy followed by total hypophysectomy due to remission failure. Fifteen of 17 patients(88.2%) showed endocrinological remission. Glucocorticoid replacement therapy was performed in all the patients who showed remission for 1 to 24 months(mean 5.9 months), and 6 patients received steroid over 6 months. Conclusion : We conclude that the direct demonstration of a tumor in the pituitary gland by MRI is the most important and definitive diagnostic tool and the location of a mass should be confirmed with increased level of ACTH by the inferior petrosal sinus sampling. Transsphenoidal microsurgery is effective treatment modality for Cushing's disease and the immediate postoperative evaluation of the surgical resection of the tumor is very important. The patients should show hypocortisolism, decreased, subnormal serum ACTH and cortisol levels and 24-hours urine free cortisol. We performed 18 transsphenoidal microsurgery for Cushing's disease in 17 patients and 15 patients(88.2%) showed endocrinological remission.
김준수,김우진,황하,김명준,김완태,Kim, Joon Soo,Kim, Woo Jin,Hwang, Ha,Kim, Myong Jun,Kim, Wantae 한국자원리싸이클링학회 2016 資源 리싸이클링 Vol.25 No.6
본 연구의 목적은 호주산 저품위 동광을 부유선별하여 정광으로 회수하고자 할 때, 최적의 부유선별 조건을 얻고자 하는데 있다. 본 연구에서는 저품위 동광의 파분쇄 및 분급에 의해 선별에 적절한 입자크기의 시료를 얻은 다음, 이를 대상으로 부유선별 시 포수제, 활성제, 억제제의 첨가량 및 광액의 pH 변화가 부선효율에 미치는 영향을 조사함으로써 품위가 향상된 정광을 얻고자 하였다. 본 연구실험결과 얻은 최적의 부유선별 조건은 광액산도 pH9.0, 활성제 500 g/t $CuSO_4{\cdot}5H_2O$, 포수제 500 g/t K.E.X, 억제제 1500 g/t $Na_2SO_3$, 광액농도는 25 wt.% 이었다. 최적조건하에서 얻은 정광중의 동 품위 및 회수율은 각각 4 wt.%와 65 wt.% 정도이었고 대부분 철 성분을 함유한 광물 이었다. The purpose of this study is to obtain an optimum condition of the concentrate by floatation using Australian low grade copper ore of suitable particle size by crushing, grinding and sizing. The effect of the dosage of collector, activator, depressant and change of acidity on the floatation was investigated. The floatation conditions comprising of pH 9.0 acidity, 500g/t $CuSO_4{\cdot}5H_2O$ activator, 500g/t K.E.X. collector, 1500g/t $Na_2SO_3$ depressant and 25wt.% plup density were optimized. Grade and recovery of copper in the concentrate obtained by froth floatation under optimum conditions were 4wt.% and 65wt.% respectively.
김준수,이명환,염홍찬,이숙자,임광규,Kim, Joon-Soo,Lee, Myung-Whan,Yum, Hong-Chan,Lee, Sook-Ja,Rhim, Kwang-Kew 韓國고무學會 1966 엘라스토머 및 콤포지트 Vol. No.
Based upon the results of the previous work, the experiments are concentrated on the improvement of the durability of rubber coated fabrics as a rain garment material. To obtain a much lighter and durable coated fabric, several kinds of light weight cotton prints having almost equal density in warp and fillingwise were chosen. Rubber coating on these prints was made by topping and spreading process using rubber compound of various viscosity, and the physical properties of final product were analysed and interpreted in terms of adhesion and durability. The results are as follows. 1. Any noticeable difference between two coating processes was not found in terms of physical properties. 2. Base fabrics should be dipped once into a dilute rubber compound before coating operation in order to obtain a uniform adhesion and physical properties, and the optimum range of the viscosity of dipping paste are from 100 poise to 200 poise. 3. Generally, the tearing strength of the coated fabrics is inversely proportional to the adhesion. 4. It was assumed that the increase of the water proofness after water immersion on the finished material which have dense base fabric is chiefly due to the swelling of the cellulosic fiber.
김준수,조재영,이재경,박아름,박진혁,윤현목,전연수,Kim, Joon Soo,Cho, Jae Young,Lee, Jae Kyung,Park, Areum,Park, Jin Hyuk,Yun, Hyun Mok,Jun, Yun-Su 한국자원리싸이클링학회 2019 資源 리싸이클링 Vol.28 No.5
Recently, it is increasing a amount of installized solar-cell rapidly, and waste Solar cell module are generated in according to the reduction of efficiency largely. Therefore, it is concerned at the environmental problems and recycling of valuable materials, greatly. The treatment processes of end-of-life photovoltaic modules are composed the disassembly of Aluminum frames, separation of Tempered glass, removal of Ethylene Vinyl Acetate and recovery of valuable Metals. For the efficient recycling, we are considered to the treatment technology seriously. And we are proposed on the general opinions according to the developing technology, EPR (Extended Producer Responsibility) problems and promotion plans for the activation of recycling industry.
SiC 휘스커로 강화한 6061 Al 합금 복합재료의 기계적 특성에 미치는 열간압출의 영향
김준수,임수근 ( Jun Su Kim,Su Geun Lim ) 한국주조공학회 1996 한국주조공학회지 Vol.16 No.2
N/A Both cast and extruded composites of SiC whisker reinforced 6061 Al alloy matrix were fabricated by high pressure infiltration of the alloy melt into the SiC preform and subsequent hot extrusion of the composite ingots. The micro structures, age hardening behavior and mechanical properties have been examined on the both cast and extruded composites of SiCw/6061. The cast composites of SiCw/6061 were obtained in which SiC whiskers were randomly oriented. Hot extrusion of these cast composites lead to alignment of the whisker in the direction of extrusion. Strengthening effect of whisker in the extruded composites is lower than that of the cast composites. The cast composites of SiCw/6061 showed higher thensile strength and lower elongation than extruded composites of SiCw/6061 at all testing temperatures. Lower tensile strength and higher elongation of the extruded composites were attributable to fine grain structures in which grain boundary sliding occurred preferentially at elevated temperatures.