http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김종범 ( Kim Jongbum ),김승필 ( Kim Seungpil ) 공군사관학교 2019 空士論文集 Vol.70 No.-
본 연구는 인공위성 자세제어를 위한 교육용 시뮬레이터를 개발하는 것을 목표로 한다. 이를 위해 센서 및 구동기 관련 기초연구를 진행하였다. 그리고 좌표계 정의, 인공위성 강체 모델링, 지구 및 우주환경 모델링을 수행하였다. 또한 다양한 자세 결정 및 제어 알고리즘을 연구하였다. 각속도 감쇠 모드, 안전 모드, 그리고 임무모드 등 다양한 모드에 대한 자세제어 시뮬레이션을 수행하는 시뮬레이터를 개발하였다. 본 연구를 통해 개발된 시뮬레이터는 실제 개발되는 인공위성 자세제어 검증은 물론 생도 교육에 활용될 수 있을 것이다. The study aims to develop an educational simulator for satellite attitude control. To do this, basic research on sensors and actuator was conducted. And coordinate system definition, satellite rigid body modeling, and earth and space environment modeling were carried out. In addition, various attitude determination and control algorithm were studied. Simulator has been developed to perform simulations for various modes such as detumbling mode, safety mode, and mission mode. The simulator developed through this study will be used for cadet education as well as attitude control verification of actual satellites.
자동차용 EOLS 브라켓의 정적 및 동적 유한요소 해석에 관한 연구
김종범(Jongbum Kim),양권(Gweon Yang) 한국자동차공학회 2006 한국자동차공학회 춘 추계 학술대회 논문집 Vol.- No.-
In this study, linear static and dynamic finite element analysis of vehicle's EOLS bracket is performed by CATIA V5. The objective of this study is to define stress contour and displacement of bracket on concept design process. At the same time we define natural frequency of bracket part, we apply the dynamic analysis result in the design process of EOLS. Through the structural analysis results using the finite element analysis methode, it is known that the part of the EOLS bracket is showed below of a yield strength, the stress of the bracket is appeared a local stress occurring on the notch face.
김종범(Jongbum Kim),정유연(Youeyun Jung),임이랑(Yeerang Lim),방효충(Hyochoong Bang),미카엘 마린(Mikael Marin) 한국항공우주학회 2017 韓國航空宇宙學會誌 Vol.45 No.2
Little Intelligent Nanosatellite of KAIST(LINK)는 카이스트 항공우주 시스템 및 제어연구실(ASCL)에서 국제협력 프로젝트인 QB50의 일환으로 개발한 2U 크기의 큐브위성이다. QB50 프로젝트의 과학적 임무 목적은 열권 및 이온층 대기를 관측하는 것이며, 2017년 1분기부터 국제우주정거장에서 순차적으로 발사될 예정이다. 상기의 임무 구현을 위해 최종 비행모델을 개발하였으며, 수락 수준(Acceptance level)의 요구조건에 따라 환경시험 및 기능시험을 수행하여 위성의 성능 및 설계의 검증을 완료하였다. 본 논문에서는 비행모델개발과 진동시험 및 열진공시험 결과에 대해 기술하였다. Little Intelligent Nanosatellite of KAIST(LINK) is a 2U-size CubeSat which is developed by Aerospace Systems & Control Lab.(ASCL) of KAIST as a part of the international cooperation project QB50. The objective of the QB50 project is to carry out atmospheric research within the lower thermosphere and ionosphere and CubeSats are planned to be deployed at the International Space Station(ISS) from the first quarter of 2017. To implement this objective, a flight model(FM) of LINK has been successfully developed and the design and performance of the satellite have been verified by performing environment and function tests in accordance with acceptance requirement level. This paper describes the development of flight model and the results of vibration and thermal vacuum tests.