3단계 층화확률화응답모형

김종민,채성산,Kim, Jong-Min,Chae, Seong-S. 한국통계학회 2010 응용통계연구 Vol.23 No.3

직접면접으로 민감한 질문을 할때 발생하는 무응답이나 거짓응답의 문제를 개선하고자 Warner (1965)가 최초로 제안한 확률화응답모형에 관한 연구는 이후 많은 연구자들에 의해 개선, 발전되어 오고 있다. 본 연구에서 표본은 층화임의복원추출법에 의해 추출되었으며, 표본배분은 최적배분법에 의해 배분되었다. 한편, Kim과 Elam (2005)의 2단계 층화확률화응답모형을 확장한 3단계 층화확률화응답모형을 사용하였다. Kim과 Elam (2005)의 2단계 층화확률화응답모형과 상대효율을 비교한 결과 본 논문에서 제시한 3단계 층화확률화모형의 효율성이 상대적으로 높다는 결과가 도출되었다. 그러나 2단계확률화응답모형을 3단계로 확장함으로써 상대적으로 효율성은 증대되지만 반대로 조사과정의 어려움이 예상된다. Asking sensitive questions by a direct survey method causes non-response bias and response bias. Non-response bias arises from interviewees refusal to respond and response bias arises from giving incorrect responses. To rectify these biases, Warner (1965) introduced a randomized response model which is an alternative survey method for socially undesirable or incriminating behavior questions. The randomized response model is a procedure for collecting the information on sensitive characteristics without exposing the identity of the respondent. Many survey researchers have proposed diverse variants of the Warner randomized response model and applied their model to collect the information of sensitive questions. Using an optimal allocation, we proposed three-stage stratified randomized response technique which is an extension of the Kim and Elam (2005) two-stage stratified randomized response technique. In this study, we showed that the estimator based on the proposed response model is more efficient than Kim and Elam (2005). But by adding one more survey step to the Kim and Elam (2005), our proposed model may have relatively less privacy protection compared to the Kim and Elam (2005) model.

이축하중을 받는 십자형 시편의 파괴인성 및 구속효과 평가

김종민,김민철,이봉상,Kim, Jong Min,Kim, Min Chul,Lee, Bong Sang 한국압력기기공학회 2016 한국압력기기공학회 논문집 Vol.12 No.1

Current guidance considers that uniaxially loaded specimen with a deep crack is used for the determination of the ductile-to-brittle transition temperature. However, reactor pressure vessel is under biaxial loading in real and the existence of deep crack is not probable through periodic in-service-inspection. The elastic stress intensity factor and the elastic-plastic J-integral which were used for crack-tip stress field and fracture mechanics assessment parameters. The difference of the loading condition and crack geometry can significantly influence on these parameters. Thus, a constraint effect caused by differences between standard specimens and a real structure can over/underestimate the fracture toughness, and it affects the results of the structural integrity assessment, consequentially. The present paper investigates the constraint effects by evaluating the master curve $T_0$ reference temperature of PCVN (Pre-cracked Charpy V-Notch) and small scale cruciform specimens which was designed to simulate biaxial loading condition with shallow crack through the fracture toughness tests and 3-dimensional elastic-plastic finite element analyses. Based on the finite element analysis results, the fracture toughness values of a small scale cruciform specimen were estimated, and the geometry-dependent factors of the cruciform specimen considered in the present study were determined. Finally, the transferability of the test results of these specimens was discussed.

도관 나사못을 이용한 경골 과간 융기 골절의 관절경적 견인 봉합술

김종민,김형규,박병문,송경섭,정성훈,노행기,윤종주,Kim, Jong-Min,Kim, Hyung-Gyu,Park, Byeong-Mun,Song, Kyeong-Seop,Jung, Sung-Hoon,Noh, Haeng-Kee,Yoon, Jong-Joo 대한관절경학회 2009 대한관절경학회지 Vol.13 No.3

경골 과간 융기부 골절은 슬관절의 뒤틀림, 과도한 굴곡 및 신전, 내반 및 외반 손상으로 인한 견열 골절의 형태로 발생을 하며 정확한 해부학적 정복이 이루어지지 않을 경우 슬관절의 불안정성과 관절 운동 제한을 초래할 수 있다. 최근 관절경을 이용한 정복과 다양한 고정 방법이 시행되고 있으며, 저자들은 이 중 견인 봉합술을 시행함에 있어서 도관 나사못을 이용한 터널을 만들어 기존에 시행되어지던 술기에 비해 보다 쉽고 편리하게 내고정을 얻을 수 있었으며, 이에 수술방법의 소개와 증례를 보고하고자 한다. Tibial eminence fracture is caused by distortion, excessive flexion and extension, varus and valgus injury of the knee joint in the form of avulsion fracture. A failure over the exact anatomical reduction of fragment can lead to instability and limitation of joint motion. Recently, a variety of arthroscopic assisted reduction and fixation technique have been used. In the tibial eminence fracture, we created an arthroscopic pull-out wire fixation technique using a cannulated screw that is easy and more convenient than in the conventional technique. So we report this technique with a review of current literatures.

F-Doped SnO₂ Thin Film/Ag Nanowire 이중층의 전기적 및 광학적 특성

김종민,구본율,안효진,이태근,Kim, Jong-Min,Koo, Bon-Ryul,Ahn, Hyo-Jin,Lee, Tae-Kun 한국재료학회 2015 한국재료학회지 Vol.25 No.3

Fluorine-doped $SnO_2$ (FTO) thin film/Ag nanowire (NW) double layers were fabricated by means of spin coating and ultrasonic spray pyrolysis. To investigate the optimum thickness of the FTO thin films when used as protection layer for Ag NWs, the deposition time of the ultrasonic spray pyrolysis process was varied at 0, 1, 3, 5, or 10 min. The structural, chemical, morphological, electrical, and optical properties of the double layers were examined using X-ray diffraction, X-ray photoelectron spectroscopy, field-emission scanning electron microscopy, transmission electron microscopy, the Hall effect measurement system, and UV-Vis spectrophotometry. Although pure Ag NWs formed isolated droplet-shaped Ag particles at an annealing temperature of $300^{\circ}C$, Ag NWs covered by FTO thin films maintained their high-aspect-ratio morphology. As the deposition time of the FTO thin films increased, the electrical and optical properties of the double layers degraded gradually. Therefore, the double layer fabricated with FTO thin films deposited for 1 min exhibited superb sheet resistance (${\sim}14.9{\Omega}/{\Box}$), high optical transmittance (~88.6 %), the best FOM (${\sim}19.9{\times}10^{-3}{\Omega}^{-1}$), and excellent thermal stability at an annealing temperature of $300^{\circ}C$ owing to the good morphology maintenance of the Ag NWs covered by FTO thin films.

이봉분포 마스터커브를 이용한 SA508 Gr. 3 원자로용기강의 파괴인성 평가

김종민,김민철,이봉상,Kim, Jong Min,Kim, Min Chul,Lee, Bong Sang 한국압력기기공학회 2017 한국압력기기공학회 논문집 Vol.13 No.2

The standard master curve (MC) approach has the major limitation because it is only applicable to homogeneous datasets. In nature, materials are macroscopically inhomogeneous and involve scatter of fracture toughness data due to various deterministic material inhomogeneity and random inhomogeneity. RPV(reactor pressure vessel) steel has different fracture toughness with varying distance from the inner surface of the wall due to cooling rate in manufacturing process; deterministic inhomogeneity. On the other hand, reference temperature, $T_0$, used in the evaluation of fracture toughness is acting as a random parameter in the evaluation of welding region; random inhomogeneity. In the present paper, four regions, the surface, 1/8T, 1/4T and 1/2T, were considered for fracture toughness specimens of KSNP (Korean Standard Nuclear Plant) SA508 Gr. 3 steel to investigate deterministic material inhomogeneity and random inhomogeneity. Fracture toughness tests were carried out for four regions and three test temperatures in the transition region. Fracture toughness evaluation was performed using the bimodal master curve (BMC) approach which is applicable to the inhomogeneous material. The results of the bimodal master curve analyses were compared with that of conventional master curve analyses. As a result, the bimodal master approach considering inhomogeneous materials provides better description of scatter in fracture toughness data than conventional master curve analysis. However, the difference in the $T_0$ determined by two master curve approaches was insignificant.

송전철탑 부분축소모형의 실험적 연구

김종민,김승준,박종섭,강영종,Kim, Jong-Min,Kim, Seung-Jun,Park, Jong-Sup,Kang, Young-Jong 한국강구조학회 2010 韓國鋼構造學會 論文集 Vol.22 No.4

This paper presents both of an investigation on the ultimate responses and a verification study on the structural methodology using beam-truss element of steel transmission towers using experimental study. The partially scaled tower which verified with analytical model was fabricated and the horizontal load was applied up to failure in the laboratory. The structural methodology for finite element analyses was verified against experimental results and both the ultimate load capacity and collapse mechanism were shown in the test to give sufficiently accurate results with those of analytical study. It was shown as well that the ultimate failure is primarily attributed to instability of the main posts in the leg parts. 본 논문에서는 실험적 연구를 통해 송전철탑의 극한 거동을 규명하고 보-트러스 구조해석모델의 적합성을 평가하였다. 해석적 연구를 통해 충분히 검증된 송전철탑의 부분 축소 모형을 실험체로 제작하였으며, 이를 극한파괴가 발생할 때 까지 수평방향으로 가력하였다. 그 결과 기존 연구에서 제안된 구조해석모델을 실험적으로 검증하였으며, 송전철탑의 극한 내력 또한 해석적 연구 결과와 잘 부합하는 것으로 판명되었다. 그리고 각재부 및 각재부 제1윗절간 주주재에서 파괴가 일어난 후 인접 부재로 전이되는 송전철탑 구조물 파괴 모드의 유사성을 확인하였다.

순차 참조와 순환 참조들을 고려한 버퍼 캐쉬 관리 기법

김종민,최종무,김제성,이동희,노삼혁,민상렬,조유근,김종상,Kim, Jong-Min,Choe, Jong-Mu,Kim, Je-Seong,Lee, Dong-Hui,No, Sam-Hyeok,Min, Sang-Ryeol,Jo, Yu-Geun,Kim, Jong-Sang 한국정보과학회 2001 정보과학회논문지 : 시스템 및 이론 Vol.28 No.1

최근 버퍼 캐쉬의 성능을 향상시키기 위한 많은 블록 교체 기법들이 제안되었으며 이 중에서 작업 집합 (working set) 변화에 잘 적응하고 구현이 용이한 Least Recently Used (LRU) 블록 교체 기법이 널리 사용되고 있다. 그러나 LRU 블록 교체 기법은 블록들이 규칙적인 참조 패턴을 보이면서 순차 참조되거나 순환 참조될 때 이 규칙성을 적절히 이용하지 못해 성능이 저하되는 문제점을 가진다. 본 논문에서는 다중 응용 트레이스를 이용하여 LRU 블록 교체 기법의 문제점을 관찰하고, 이 문제점을 해결하는 통합된 형태의 효율적인 버퍼 관리 (Unified Buffer Management, 이하 UBM) 기법을 제안한다. UBM 기법은 순차 참조 및 순환 참조를 자동 검출하여 분리된 공간에 저장하고 이들 참조에 적합한 블록 교체 기법으로 이 공간을 관리한다. 또한 순차 참조와 순환 참조를 위한 공간과 나머지 참조를 위한 공간의 비율을 최적으로 할당하기 위해 온라인에서 수집된 정보를 이용하여 계산된 단위 공간 증가당 예상 버퍼 적중 증가율을 이용한다. 다중 응용 트레이스 기반 시뮬레이션 실험에서 UBM 기법의 버퍼 적중률은 LRU 블록 교체 기법에 비해 평균 12%, 최대 28%까지 향상된 결과를 보였다.

스팸 메일 차단을 위한 RBL개념의 확장에 관한 연구

김종민,김형근,김봉기,Kim, Jong-Min,Kim, Hion-Gun,Kim, Bong-Gi 한국정보통신학회 2008 한국정보통신학회논문지 Vol.12 No.10

본 논문에서는 스팸 차단을 위해서 사용되고 있는 RBL의 기능에 더하여, 최근 유행하는 스팸 형태에 효과적으로 대응할 수 있는 방법으로 메일원문에 포함된 URL을 추출하여 RBL에 적용하여 확장할 수 있는 방법을 제안한다. 최근 스팸메일발송에 많이 사용되고 있는 봇넷은 이메일 스팸에서 메일 발송 주소분포로 해결할 수 없는 문제점을 가지고 있다. 일반적으로 이러한 스팸 메일은 각 개인의 감염된 좀비 PC에서 발송되므로, 발송 주소 자체가 RBL에서 사용하기에 효율성이 떨어지고 무의미 하다. 따라서 봇넷에 의해 발송되는 스팸메 일을 효과적으로 차단하기 위한 방법으로써, 스팸메일의 원문에 포함된 URL을 분석하고, 사용자를 유인하는 URL 사이트에 대한 분포자료를 바탕으로 효과적으로 차단률을 향상시킬 수 있는 방법을 제안한다. 본 논문에서는 봇넷에서의 스팸메일 발송 메커니즘과, 이러한 유형의 스팸메일을 판단하기 위하여 사용할 수 있는 방법을 제안하고 분석 가능한 스팸메 일의 수집을 위하여 이메일스팸 트랩 시스템을 구성하여 실험한다. 일정한 실험기간 동안 수신된 스팸메일의 분석을 통하여 스팸메일에 포함된 URL을 이용한 확장된 RBL기법이 스팸메일의 검출 분포를 높이는데 효과적임을 보여준다.은 요약문입니다. In addition to RBL function, which is used to applying for spam e-mail filtering, as an effective way to deal with the recently widespread spam types, this paper proposes how to extract URL that was comprised in the original e-mail, apply it to RBL, and expand it. The BotNet, which is used to using for sending spam mails these days, has a problem that it is not able to solve with the distributed addresses of sent mails in spam e-mails. In general, as these spam e-mails are sent from the infected Zombi PC of individual user, the sent address itself is not efficient and is meaningless to use in RBL. As an effective way to filter spam e-mail sent by BotNet, this paper analyzes URLs that contained in the original spam e-mail and proposes how to effectively improve filter rate, based on the distribution data of URL site tempting users. This paper proposes the sending mechanism of spam e-mails from BotNet and the methods to realize those types of spam e-mails. In order to gather analyzable spam e-mails, this paper also carries out an experiment by configuring trap system of spam e-mail. By analyzing spam e-mails, which have been received during the certain period of experiment, this paper shows that the expanded RBL method, using URLs that contained in spam e-mails, is effective way to improve the filter distribution of spam e-mail.

GAITRite보행시스템을 이용한 치매노인의 보행분석

김종민,김진주,박수연,차재현,김민정,김진아,Kim, Jong-Min,Kim, Jin-Ju,Park, Su-Yeon,Cha, Jae-Hyeon,Kim, Min-Jung,Kim, Jin-A 한국임상보건과학회 2017 한국임상보건과학회지 Vol.5 No.1

Purpose. This study was classified into normal and demented elderly through K-MMSE. The purpose of this study was to analyze gait characteristics of normal elderly and demented peoples using GAITRite walking system. Methods. The subjects of this study were selected as elderly people receiving home visit physical therapy. An independent t-test was conducted to verify the statistical significance of the time-space variables of the elderly with dementia. Results. Step time(p=0.041), cycle time(p=0.037), distance(p=0.024), and cadence(p=0.048) were significantly shorter in the normal elderly than in the demented elderly on flat place. The mean age was significantly longer in normal elderly than in elderly persons with dementia. Step time(p=0.022), cycle time(p=0.023), distance(p=0.019), and cadence(p=0.015) were significantly shorter in the mat walking. The mean age was significantly longer in normal elderly than in elderly patients with dementia. Stretch time, cycle time, distance, and hair support time were significantly shorter in the mat walking. The mean age of the elderly was significantly longer than that of the elderly with dementia. The spinal support time, which is a spatial variable, was significantly shorter in the normal elderly than in the demented elderly. Conclusions. It compares the various gait characteristics of the normal and demented elderly people, thereby increasing the walking ability of the elderly person more effectively. This study should be utilized as basic data for preventing fall-down.

췌장암의 외과적 절제술 후 항암플러스로 항전이 및 재발 방지 중인 환자 증례보고

김종민,박재우,유화승,이연월,조종관,Kim, Jong-Min,Park, Jae-Woo,Yoo, Hwa-Seung,Lee, Yeon-Weol,Cho, Chong-Kwan 대한암한의학회 2011 大韓癌韓醫學會誌 Vol.16 No.1

Objective : To investigate the anti-metastasis and preventing relapses of HangAm-Plus (HAP) on pancreatic cancer patient. Methods : A 49 year old male patient diagnosed with pancreatic cancer (T3N0M0) was admitted to EWCC (East-West Cancer Center) on Jul. 21st 2008. He had operated pylorus preserving pancreatoduodenectomy (PPPD) and came to the anti-metastasis and preventing relapses on pancreatic cancer patient. The patient was treated with HangAm-Plus (HAP) (3,000 mg/day) for the period of 33 months from Jul. 21st, 2008 to Apr. 7th, 2011. Tumor markers (CEA and CA19-9) were used to evaluate the disease progression of the patient. Positron Emission Tomography (PET) and Computed Tomography (CT) were also followed up. Results : HAP treatment was well tolerated by the patient. Patient has shown 33 months of disease free survival until now. Conclusion : This case study supports HAP's potential efficacy in the anti-metastasis and preventing relapses of pancreatic cancer patient.