http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
능동형 RFID 네트워크 시스템 고속 충돌방지 알고리즘
김재정(Jae Jeong Kim),이학재(Hak Jae Lee),김영민(Yoeng Min Kim) 한국전자통신학회 2016 한국전자통신학회 논문지 Vol.11 No.6
본 논문은 다수의 RFID 리더가 공간상에서 무선네트워크를 형성하여 리더기마다 소속된 능동형 태그들 관리할 수 있는 효율적인 시스템을 설계 및 구현하고 특히 이 시스템에서 리더기-리더기 간 및 태그-태그 간에 발생하는 충돌을 회피하도록 하는 효율적인 알고리즘을 제안한다. RF 리더기가 무선 네트워크 노드들로서 작동하고 이들이 동기식으로 링크를 형성하여 리더기간 메시지를 주고받을 수 있도록 구성하였다. 능동형 태그역시 각 리더기와 동기식으로 통신하도록 구성되며 태그 고유 ID를 사용하여 태그 간에 슬롯 점유를 경쟁시키는 알고리즘을 수행한다. 리더기 간 충돌방지를 위하여 각 리더기 노드들은 네트워크 통신 주기에서 서로 다른 시간 구간에서 리더기 기능을 수행하도록 하였다. This paper proposes an efficient collision avoidance algorithm that a group of RFID readers manage each of their affiliated active RFID tags in a space by establishing wireless network and avoids communication collision between RFID reader to reader and RFID tag to tag, and reader to tag. RF readers operate as wireless network nodes, create synchronous links each other, and can exchange messages. Active tags also are operated communicating each reader devices synchronously, and competing slot position between tags algorithm using unique tag identification number is implemented. Each reader node operates their own reader function different time slot network communication period to prevent collision between readers communication.
관 형태에 따른 Shell and Tube 열교환기의 열전달계수 관한 연구
김재정(Jae-Jeong Kwon),박재홍(Jae-Hong Park),김인관(In-Kwan Kim),김영수(Young-Soo Kim) 대한설비공학회 2006 대한설비공학회 학술발표대회논문집 Vol.2006 No.6
The purpose of this study is a heat transfer coefficient test of evaporator tube in shell and tube heat exchanger by shapes, using R-404A. The experimental apparatus is designed to simulate the real heat transfer rate in one shell and tube heat exchanger. The test section is formed four type tubes that are Inner ridged tube, Corrugated tube, Turbo-C tube, Inner fin tube and shell type is formed by electrical heater. All tests were performed at a fixed refrigerant evaporator temperature at 1.5℃, -3℃ and with mass fluxes of 29, 25 ㎏/hr. Heat transfer rate is calculated a enthalpy difference in test section. In experiment, heat transfer coefficient measured one by one and electrical heaters are supplemented by evaporator.
산업현장에 적용 가능한 IMU 센서 기반의 사용자 낙상감지 시스템 구현
김재정(Jae-Jung Kim),박민호(Min-Ho Park),김신호(Sin-Ho Kim),서지윤(Ji-Yun Seo),정도운(Do-Un Jeong) 한국정보통신학회 2021 한국정보통신학회 여성 ICT 학술대회 논문집 Vol.2021 No.8
본 논문에서는 산업현장에서 낙상 사고 발생 시 신속한 사고 발견 및 조치를 위하여 산업현장에 적용가능한 IMU 센서 기반의 사용자 낙상감지 시스템을 구현하였다. 구현된 시스템은 사용자의 움직임에 따른 데이터를 기반으로 낙상감지 분류 알고리즘을 통해 낙상 상태를 판단한다. 낙상감지 분류 알고리즘은 계측된 데이터를 상보 필터 등의 전처리 과정을 수행한 후 가속도와 각도 데이터를 검출하여 낙상을 판단한다. 낙상감지 시스템의 성능 평가를 위하여 산업 현장에서 움직임 및 낙상 상황을 가정하여 낙상감지 판단의 정확성 평가를 진행하였다. 실험 결과, 30분의 일상생활 중 낙상 검출 정확도가 93.26%임을 확인하였다. 따라서 본 논문에서 구현된 IMU 센서 기반의 사용자 낙상감지 시스템은 일상생활 중 낙상을 검출할 수 있음을 확인하였다. 향후, 움직임에 따른 오차를 줄여 정확성을 높이고 다양한 상황에 따른 낙상 감지를 적용할 수 있는 연구를 지속적으로 수행하고자 한다. In this paper, an IMU sensor-based user fall detection system that can be applied to industrial sites is implemented for rapid accident detection and action in case of a fall accident in an industrial field. The implemented system determines the state of a fall through a fall detection classification algorithm based on data according to the user’s movement. The fall detection classification algorithm performs preprocessing on the measured data, such as a complementary filter, and then detects acceleration and angle data to determine a fall. In order to evaluate the performance of the fall detection system, the accuracy of the fall detection judgment was evaluated assuming movement and fall conditions at the industrial site. As a result of the experiment, it was confirmed that the accuracy of detection of falls during 30 minutes of daily life was 93.26%. Therefore, it was confirmed that the IMU sensor-based user fall detection system implemented in this paper can detect falls in daily life. In the future, we plan to continuously conduct research that can improve accuracy by reducing errors caused by movement and apply fall detection according to various situations.