RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 원문제공처
          펼치기
        • 등재정보
          펼치기
        • 학술지명
          펼치기
        • 주제분류
          펼치기
        • 발행연도
          펼치기
        • 작성언어
        • 저자
          펼치기

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • KCI등재

        PVD 공정을 이용한 Si 양자점 형성 전산모사

        김윤성,정용재,Kim, Yun-Sung,Chung, Yong-Chae 한국세라믹학회 2002 한국세라믹학회지 Vol.39 No.5

        본 연구에서는 PVD 공정으로 Si 양자점 형성시 증착조건의 변화가 증착된 양자점 크기와 분포에 미치는 영향을 Monte Carlo법을 응용한 전산모사를 통하여 정량적으로 분석하였다. 전산모사시 PVD 공정에서 일반적으로 제어가 가능한 기판온도, 증착시간, 가스압력과 타겟-기판거리를 공정변수로 선택하였다. 계산 겨로가 증착속도가 0.05 nm/sec이고 기판온도 490${\circ}$, 증착시간 7 sec, 가스압력 3 mTorr, 타겟-기판거리가 8 cm일때 증착 밀도가 $1{\times}10^{12}cm^{-2}$인 Si 양자점 형성이 가능할 것으로 예측되었다. In this study, the effect of the processing parameters in PVD process on the size and the distribution of deposited Si quantum dots was quantitatively investigated by computational simulation utilizing Monte Carlo method. The processing parameters, substrate temperature, deposition time, gas pressure and target-substrate distance were selected as variables since those parameters are often selected as variables in PVD experiments. It is predicted that the density of $1{\times}10^{12}cm^{-2}$ Si quantum dots can be deposited on the substrate when the deposition rate is 0.05 nm/sec at the substrate temperature of 490${\circ}$, deposition time of 7 sec, gas pressure of 3 mTorr and target-substrate distance of 8 cm.

      • SCOPUSKCI등재

        본차이나 소지용 인산칼슘 분말의 제조 및 적용에 관한 연구

        김윤성,김준이,유중환,김형태,Kim, Yun-Sung,Kim, Juny,Yoo, Jung-Whan,Kim, Hyung-Tae 한국세라믹학회 2004 한국세라믹학회지 Vol.41 No.12

        Calcium phosphate powders have been prepared by using $Ca(OH)_2\;and\;H_{3}PO_4$ solution under various conditions such as pH, calcination temperature, and reaction time. ${\beta}-TCP({\beta}-tricalcium phosphate)$and HAp(hydroxyapatite) were synthesized at pH=5.21 and pH > 7.62, respectively. From XRD results, $Ca(OH)_2\;and\;H_{3}PO_4$ solution reacted quickly to form HAp, which was structurally stable up to 16h. Calcination temperature having good crystallinity is revealed to be at $1200^{\circ}C$. SEM analysis showed that ${\beta}-TCP$ and HAp with needle type were synthesized at pH 5.21 and pH 7.62, respectively. However, at pH 9.16, tiny and homogeneous HAp having sphere was prepared and rearranged to show needle morphology. HAp synthesized at pH 9.16 was utilized as bonechina body and calcined. The sample was analyzed its crystallinity, water absorbtion, color, and shape to check physical properties. 수용액의 pH, 소성온도, 반응시간 등을 변화한 조건하에서 $Ca(OH)_2$와 $H_{3}PO_4$ 수용액을 이용하여 인산칼슘계 화합물을 제조하였다. 산성분위기(pH=5.21)에서는 ${\beta}-TCP({\beta}-tricalcium phosphate)$가, pH>7.62에서는 HAp(hydroxyapatite)가 주 결정상으로 관찰되었다. XRD 분석결과, $Ca(OH)_2$와 $H_{3}PO_4$는 빠르게 반응(5분이내)하여 HAp를 생성하였고, 반응 16시간까지 안정적으로 구조를 유지하였다. 우수한 결정성을 나타내는 소성온도는 $1200^{\circ}C$로 관찰되었다. 주사전자현미경(SEM)에 의한 미세구조 관찰 결과, pH가 5.21일 경우 침상 형태의 ${\beta}-TCP$ 입자가, pH 7.62에서는 침상 형태의 HAp가 합성되었다. 그러나 pH 9.16에서는 매우 작고 균일한 구형의 HAp 입자들이 생성되었고, 다시 작은 입자들이 침상으로 재배열된 형상을 관찰할 수 있었다. 합성된 HAp(pH 9.16)를 본차이나 소지에 일정량 혼합하여 본차이나 물성, 즉 결정성, 흡수율, 색도, 파단면의 형상을 측정${\cdot}$분석하였다.

      • KCI등재

        임의형태의 장애물 경계정보를 이용한 최소거리 우회경로 탐색 알고리즘

        김윤성,박수현,Kim, Yun-Sung,Park, Soo-Hyun 한국시뮬레이션학회 2010 한국시뮬레이션학회 논문지 Vol.19 No.4

        Currently used shortest path search algorithms involve graphs with vertices and weighted edges between each vertex. However, when finding the shortest path with a randomly shaped obstacle(an island, for instance) positioned in between the starting point and the destination, using such algorithms involves high memory inefficiency and is significantly time consuming - all positions in the map should be considered as vertices and every line connecting any of the two adjacent vertices should be considered an edge. Therefore, we propose a new method for finding the shortest path in such conditions without using weighted graphs. This algorithm will allow finding the shortest obstacle bypass given only the positions of the obstacle boundary, the starting point and the destination. When the row and column size of the minimum boundary rectangle to include an obstacle is m and n, respectively, the proposed algorithm has the maximum time complexity, O(mn). This performance shows the proposed algorithm is very efficient comparing with the currently used algorithms.

      • 국내외 물류창고의 방화구획 성능 기준 비교연구

        김윤성(Yun Sung Kim),최윤주(Yun Ju Choi),허예림(Ye rim Huh),권영진(Yung Jin Kwon) 한국화재소방학회 2022 한국화재소방학회 학술대회 논문집 Vol.2022 No.춘계

        최근 물류창고 화재로 인한 피해가 급증하면서 국가적인 차원에서 물류창고를 대상으로 화재안전대책을 강화하고 있는 추세이다. 특히 2020년 쿠팡 물류창고 화재 이후 화재가혹도를 고려하지 않고 사양위주로 설계된 방화셔터 등이 소실되면서 물류창고의 방재시스템의 한계가 나타나 정부에서는 20만m2이상인 물류창고에만 수행되었던 성능위주 화재안전설계를 3만m2 이상으로 확대하는 법안을 최근에 통과시켰으며 대부분의 물류창고를 대상으로 성능위주설계를 수행해야 하는 상황으로서 국내 물류창고의 방화구획 설계기준에 대한 전면적인 검토가 필요하다. 이에 따라 본 연구에서는 국내 물류창고의 방화구획 성능 확보를 위한 기초적 자료로서 국내외 방화구획 성능설계에 대한 기준을 비교 분석하여 기준적 차이점을 조사하고, 개선방안을 도출하는 것을 목적으로 한다. 국내에서는 건축물의 용도, 면적 등을 고려하여 벽, 기둥 등 주요 구조부의 내화시간을 세분화하여 규정하고 있다. 그러나 방화문 및 방화셔터의 내화시간은 일률적으로 적용하고 있는 실정이다. 반면 국외에서는 방화구획 성능기준을 적용하기 위하여 가연물 양과 종류, 화재가혹도 등을 고려하여 구획설계에 따른 화재공학적 분석에 의한 내화설계를 실시하고 있다. 특히 미국의 IBC에서는 물류창고에 설치되는 주요구조부의 내화시간을 2시간에서 3시간으로 규정하고 있으며 그 부분에 설치되는 방화문 및 방화셔터의 내화시간을 1.5시간에서 3시간까지 적용하도록 하고 있다. 물론 국내에서도 건축물의 조건이나 부재의 내화성능을 실험 등을 통해 명확하게 규정하고 있어 설계의 편리함 등의 장점을 가지고 있으나 화재하중, 환기계수 등에 대한 것은 고려하고 있지 않아 대형 물류창고와 같은 건축물을 대상으로는 합리적인 내화설계가 불가능할 것으로 보인다. 국내 방화구획 성능 기준을 적용한 물류창고의 화재사례에서 성능 미흡의 문제점이 명확히 드러난 현 상황에서 물류창고의 화재특성을 고려한 방화구획 설계를 실시하는 것은 필수적인 사항일 것으로 판단된다. 이에 따라 물류창고의 화재특성 파악을 위해 화재하중, 환기인자 등에 대한 연구가 활발히 이루어져야 한다.

      • KCI등재

        남북 재생에너지 협력을 위한 전략과 정책적 과제

        김윤성(Kim, Yun-Soung),윤성권(Yun, Seong-Gwon),이상훈(Lee, Sang-Hoon) 강원대학교 비교법학연구소 2018 환경법과 정책 Vol.21 No.-

        최근 남북관계가 개선되면서 철도, 도로, 산림 등 경제협력에 대한 논의가 본격화되고 있다. 북한은 발전소와 전력망 등 전력인프라 노후화, 발전용량의 절대적 부족으로 심각한 에너지 위기를 겪고 있으므로 에너지 협력은 더욱 실질적 단계로 나아갈 수 있다. 특히 재생에너지는 소규모 개발과 수요지 인근에 건설이 쉬워 대규모 전력망 없이 전력을 공급할 수 있고, 난방, 취사, 조명 등 주민들의 생활에 필요한 에너지를 공급할 수 있으므로 인도적인 지원도 가능하다. 또한, 한반도 에너지전환과 지속가능한 미래를 위해서도 재생에너지가 협력의 중심이 될 필요가 있다. 북한은 2013년에 제정된 『재생에네르기법』에 근거하여 2044년까지 태양광과 풍력 등 5GW의 설비를 공급하는 목표를 제시하고 있다. 『재생에네르기법』은 재생에너지 개발과 이용을 장려하고 재생에너지 산업을 활성화하여 경제를 지속적으로 발전시키고 인민 생활 수준을 높이며 국토환경을 보호하는 데 이바지하려는 목적이 있다고 밝히고 있다. 또한, 북한은 개마고원 일대, 서해안 지역이 풍황 자원이 우수하고, 평균 일사량도 남한과 비슷한 수준이어서 소규모 재생에너지 개발을 통한 전력공급에 유리한 여건을 갖추고 있다. 남북 재생에너지 협력을 위한 전략으로 도시형과 농촌형 두 가지 접근 방법을 검토할 수 있다. 상대적으로 전력수요가 집중된 도시지역에 베란다 태양광, 건물 일체형 태양광, 열병합발전과 재생에너지를 연동시킨 지역난방 주택 등을 도입할 수 있다. 농촌지역은 난방과 취사, 농업용으로 필요한 열과 〮전기를 스스로 공급하는 에너지 자립마을을 구상할 수 있다. 정책 개선 방향으로 남북교류협력사업의 무상지원 범위를 확대할 필요가 있고, 국내 『신에너지 및 재생에너지 개발·이용·보급 촉진법』에 북한지역 사업에 대한 지원과 관리규정을 마련해야 한다. 우리와 체계가 다른 북한의 에너지법, 경제협력법, 투자 관련 법에 대한 이해도 수반되어야 한다. As inter-Korean relations have improved recently, cooperation discussion is going on laying rails, installing road and reforestation sectors, and so on. North Korea has been experiencing a severe energy crisis due to the old power plant and lack of power infrastructure. Cooperation for energy is seemed to be more urgent than other sectors. Renewable energy can be developed on a small scale and is easy to build near the demand sites; it can supply electricity without a large power grid. Therefore, it can supply energy immediately for living such as heating, cooking, and lighting. Humanitarian assistance through renewable energy has been possible under sanctions against North Korea. Renewable energy plays an essential role in energy transition and sustainable future on the Korean peninsula. North Korea enacted the “Renewable Energy Law” in 2013 and set its energy supply goal of developing solar and wind power to 5GW by 2044. North Korea says it has the goal of “encouraging the development and use of renewable energy and revitalizing renewable energy industry, thereby contributing to the continual development of the economy, raising peoples living standards and protecting the environment.” The wind conditions in the Gaema Plateau and the West Coast are excellent for the development. The average solar radiation throughout North Korea is similar to that of South Korea. Therefore, North Korea is not in an unfavorable position to supply electricity through small-scale renewable energy development. Urban-type and rural type strategies for small-scale development are also previewed. In urban areas, where electricity demand is relatively high, electricity can be generated using small veranda solar PV, building integrated solar photovoltaic, and district heating system that combines cogeneration and renewable energy. On the other hand, in rural areas, energy-independent village system can be built. That system can supply heat and electricity needed for heating, cooking, and agriculture using its plentiful supply of biomass resources. Above all, it is necessary to improve the system to revitalize inter-Korean renewable energy cooperation. First, expanding the scope of grants for inter-Korean cooperation projects is needed. Second, the law “Promotion of Development and Utilization of New Energy and Renewable Energy” needs to be revised to support and control the renewable energy projects in North Korea. Lastly, Understanding the North Korean energy laws, economic cooperation laws, and investment laws that are different from our system should also be accompanied.

      • 하이브리드 자동차용 DC-DC Converter 상용화 개발

        김윤성(Yun-Sung Kim),서기봉(Ki-Bong Seo),고돈열(Don-Yeol Ko),백병덕(Byung-Dug Baeg) 전력전자학회 2009 전력전자학술대회 논문집 Vol.2009 No.1

        본 논문은 소형, 준 중형 하이브리드 승용 자동차에 적합한 1.5㎾급 DC-DC Converter를 개발하여 그 성능 및 내구 신뢰성을 검증한 사례를 보고한 것이다. 개발된 시제품은 트렁크룸 장착구조를 목표로 하고 있으며 냉각 방식은 Air-flow를 이용한 Forced-air방식이다. 최종 시제품을 통해서 각종 보호기능 및 효율, 출력 정전압 특성 등의 기본 성능 시험을 실시하였고 각종 환경시험 및 진동시험을 실시하여 내구 성능을 확인 하였다.

      • KCI등재

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼