2급 치근이개부 치료 시 흡수성 차폐막, 동종골 이식 및 혈소판 농축 혈장의 골 재생 효과에 대한 디지털 공제술의 정량적 분석

김상훈,임성빈,정진형,Kim, Sang-Hoon,Lim, Sung-Bin,Chung, Chin-Hyung 대한치주과학회 2002 Journal of Periodontal & Implant Science Vol.32 No.1

The purpose of this study was to evaluate effect of platelet rich plasma on the treatment of Grade II furcation involvement, with Demineralized Freeze-Dried Bone(Dembone(R)) and bioabsorable membrane(BioMesh(R)) in humans by digital subtraction radiography. 12 teeth(control group) were treated with Demineralized Freeze-Dried Bone(Dembone(R)) and bioabsorable membrane(BioMesh(R)), and 12 teeth(test group) were treated with Demineralized Freeze-Dried Bone(Dembone(R)), bioabsorable membrane(BioMesh(R)) and Platelet Rich Plasma. The change of bone density was assessed by digital subtraction radiography in this study. The change of mineral content by as much as 5%(vol) could be perceived in the subtracted images. The change of mineral content was assessed in the method that two radiographs are put into computer program to be overlapped and the previous image is subtracted by the later one. Both groups were statistically analyzed by Wilcoxon signed Ranks Test and Mann-whitney Test using SPSS program (5% significance level). The results were as follows: 1. In test group, the radiopacity in 3 months after surgery were significantly increased than 1 month after surgery(p<0.05). However. there were no significant difference between 1 month after surgery and 3 months after surgery in control group(p>0.05). 2. In test and control group, the radiopacity in 6 months after surgery were significantly increased than 1 month after surgery(p<0.05) 3. In test and control group, the radiopacity in 6 months after surgery were significantly increased than 3 months after surgery(p<0.05). 4. There were no significant difference between test group and control group at 1 month, 3 months after surgery, but radiopacity in test group were significantly increased than control group at 6 months after surgery(p<0.05). In conclusion, Platelet Rich Plasma can enhance bone density.

전기자동차용 80[kW] IPMSM 구동 시스템 개발

김상훈,박내춘,Kim, Sang-Hoon,Park, Nae-Chun 강원대학교 산업기술연구소 2013 産業技術硏究 Vol.33 No.1

This paper is about the development of 80[kW] IPMSM(Interior Permanent Magnet Synchronous Motor) drive system for an electric vehicle. MTPA(Maximum Torque per Ampere) operation and flux-weakening operation for the optimal torque control of the IPMSM are presented. In this system, the torque control of the IPMSM is achieved by using the look-up table, which gives d- and q-aixs current references for the given torque command in the MTPA operation and flux-weakening operation regions. This look-up table is made by current injection tests, and from which the motor parameters are also estimated. The proposed system is verified by the experiment on the electric vehicle drive system, which consists of an 80[kW] IPMSM and an IGBT inverter.

슬관절 전치환술에서 후방 안정 임플란트의 오정렬이 경골 기둥에 미치는 영향

김상훈,안옥균,배대경,김윤혁,김경수,이순걸,Kim, Sang-Hoon,Ahn, Ok-Kyun,Bae, Dae-Kyung,Kim, Yoon-Hyuk,Kim, Kyung-Soo,Lee, Soon-Gul 대한의용생체공학회 2007 의공학회지 Vol.28 No.1

Recently, it has been reported that the posterior stabilized implant, which is clinically used for the total knee replacement (TKR), may have failure risk such as wear or fracture by the contact pressure and stress on the tibial post. The purpose of this study is to investigate the influence of the mal alignment of the posterior stabilized implant on the tibial post by estimating the distributions of contact pressure and von-Mises stress on a tibial post and to analyze the failure risk of the tibial post. Finite element models of a knee joint and an implant were developed from 1mm slices of CT images and 3D CAD software, respectively. The contact pressure and the von-Mises stress applying on the implant were analyzed by the finite element analysis in the neutral alignment as well as the 8 malalignment cases (3 and 5 degrees of valgus and varus angulations, and 2 and 4 degrees of anterior and posterior tilts). Loading condition at the 40% of one whole gait cycle such as 2000N of compressive load, 25N of anterior-posterior load, and 6.5Nm of torque was applied to the TKR models. Both the maximum contact pressure and the maximum von-Mises stress were concentrated on the anterior-medial region of the tibial post regardless of the malalignment, and their magnitudes increased as the degree of the malalignment increased. From present result, it is shown that the malalignment of the implant can influence on the failure risk of the tibial post.

Seismic Performance of Transportation Networks

김상훈,김종인,Kim, Sang-Hoon,Massanobu, Shinozuka,Kim, Jong-In Earthquake Engineering Society of Korea 2004 한국지진공학회논문집 Vol.8 No.3

본 연구는 캘리포니아 내 고속도로망을 대상으로 지진발생 후 교통흐름의 변화를 평가하는 기법에 대하여 이루어졌으며, 고속도로망 상에 위치한 교량의 손상정도가 평가기법의 가장 기본적인 요소로 사용되었다. 본 연구에 사용된 교량의 지진취약도는 PGA 또는 PGV의 함수로 나타내어졌고, 1994년 Northridge 지진과 일련의 시나리오 지진에 대하여 교통망 손상 평가를 수행하였다. 또한 교량 보수 및 보강 후 교통망에 대한 피해정도를 정량화하기 위해 확률모델을 개발하였으며, 그 피해정도는 시간(Drivers Delay)으로 나타내었다. 본 연구가 캘리포니아를 대상으로 이루어져 국내적용 및 활용가능성에 대해서는 후속 연구가 뒤따라야 할 것으로 사료된다. This paper describes a method of evaluating seismic system performance of highway transportation network in California. The basic element that plays a crucial role in this study is the fragility information of highway bridges in Caltrans' (California Department of Transportation) freeway network. The bridge fragility information is expressed as a function of the ground motion intensity, such as peak ground acceleration (PGA) or peak ground velocity (PGV). Network damage was evaluated under the 1994 Northridge earthquake and scenario earthquakes. A probabilistic model was developed to determine the effect of repair of bridge damage on the improvement of the network performance as days passed after the event. As an example, the system performance degradation measured in terms of an index, “Drivers Delay”, is calculated for the Los Angeles area transportation system, and losses due to Drivers Delay with and without retrofit were estimated.

정상 반월상 연골의 혈관 분포

김상훈,조홍식,이한영,이기범,민병현,Kim Sang Hoon,Cho Hong Sik,Lee Han Young,Lee Ki-Bum,Min Byung-Hyun 대한관절경학회 2003 대한관절경학회지 Vol.7 No.1

목적 : 정상 반월상 연골을 형태학적으로 계측하고 혈관 분포를 조사하여 연령과 해부학적 위치에 따른 차이를 비교하였다. 대상 및 방법 : 21구의 사체에서 반월상 연골을 채취하여 이를 연령별로 3군으로 나누고 각각을 10개의 절편으로 나누어 반월상 연골의 폭(width)과 혈관의 분포를 측정하였다. 결과 : 반월상 연골의 평균 폭은 내측이 $10.4{\pm}2.92mm$, 외측이 $10.55{\pm}2.05mm$로 측정 되었다. 혈관 분포 범위는 내측이 $20.29{\pm}8.44\%$, 외측이 $18.99{\pm}7.03\%$이었다. 해부학적 위치에 따른 혈관 분포는 내측의 경우 전각의 혈관 분포가 가장 풍부하였고(p<0.05), 외측의 경우 후각의 혈관 분포가 가장 풍부하였으며(p<.0.05) 슬와근부에서도 혈관 주행을 관찰할 수 있었다. 연령이 증가할수록 내측은 전각, 체부, 후각 모두 혈관 분포가 감소하며 외측은 체부와 후각에서 혈관 분포가 감소하는 것으로 나타났다(p<.0.05). 결론 : 내측 및 외측 반월상 연골의 혈관 분포는 해부학적 위치에 따라 달랐으며 연령이 증가함에 따라 내측과 외측에서 모두 전체적인 혈관 분포가 감소함을 알 수 있었다. Purpose : To evaluate the morphologic measurement and microvasculature of the normal human meniscus in Korean and to compare the difference of microvasculature according to the age and anatomical location. Materials and methods : Menisci of 21 cadavers divided into 3 groups according to the age. Each meniscus was divided into 10 parts of which the width and area of microvasculature were measured. Results : The average width of the medial and lateral menisci were $10.49{\pm}02.92mm$ and $10.55{\pm}2.05mm$, respectively. The average area of the microvasculature measured $20.29{\pm}8.44\%$ in the medial meniscus and $18.99{\pm}7.03\%$ in the lateral meniscus. The microvasculature of the medial meniscus was most abundant in the anterior horn and least abundant in the posterior horn (p<0.05). The lateral meniscus showed the most vessels in the posterior horn (p<0.05). The microvasculature of popliteal hiatus was not avascular but hypovascular. The area of microvasculature decreased with increasing age in all parts of the medial meniscus and body and posterior horn of the lateral meniscus (p<0.05). Conclusion : Differences in the anatomical distribution of the vessels were noted of both the medial and lateral menisci. The area of microvasculature generally decreased proportionally with increasing age in both medial and lateral meniscus.

UHF대역 RFID 수신단(리더)의 지터(비트동기) 및 글리치 제거회로 설계

김상훈,이용주,심재희,이용석,Kim, Sang-Hoon,Lee, Yong-Joo,Sim, Jae-Hee,Lee, Yong-Surk 한국통신학회 2007 韓國通信學會論文誌 Vol.32 No.1A

본 논문에서는 ISO/IEC 18000-6C 표준안을 만족하는 UHF대역 RFID 수신단(리더)의 지터(Jitter)처리와 글리치제거 알고리듬 및 설계방안을 제안하고 이를 이용한 리더를 구현하여 실제 TI(Texas instrument) Gen2 태그의 응답을 분석하였다. ISO/IEC 18000-6C표준안은 Reader에서 Tag로 데이터 전송 시 +/-1%의 오차와 Tag에서 Reader로 데이터 전송 시 최대 +/-22%의 오차를 허용하도록 정의하고 있다. 이러한 허용오차범위 내의 데이터에 대해 본 논문에서 제시한 회로는 기존의 PLL(DPLL, ADPLL)을 이용한 방식이 아닌 최대허용치(tolerance)와 허용치누적을 이용하여 일정치의 오차범위를 허용하며 디코딩 하도록 설계하였다. 또한 글리치와 지터제거 알고리듬의 기본원리를 동일하게 구성하여 글리치제거와 지터제거를 따로 구분하지 않고 하나의 기능으로 동작하게 한다. 주 클럭은 19.2MHz로 설정하였으며 LF는 국내 전파법에 맞도록 40kHz로 설정하였다 시뮬레이션결과 15%이하의 위상지터를 가진 입력데이터에 대해 판독에러율은 0이었으며 $15%{\sim}22%$ 위상지터를 가진 입력데이터에 대해서 는 0.000589였다. 그러나 동적LF생성회로를 사용한 결과 $15%{\sim}22%$ 위상변화를 가진 입력데이터에 대해 판독에러율은 0이었으며 표준안에 정의된 최대 +/-22%오차 범위내의 지터 발생에 대해서 판독에러율은 0이었다. In this paper, we propose an implementation and an algorithm of 'Jitter and Glitch Removing Circuit' for UHF RFID reader system based on ISO/IEC 18000-6C standard. We analyze the response of TI(Texas Instrument) Gen2 tag with a reader using the proposed algorithm. In ISO/IEC 18000-6C standard, a bit rate accuracy(tolerance) is up to +/-22% during tag-to-interrogator communication and +/-1% during interrogator-to-tag communication. In order to solve tolerance problems, we implement the Jitter and Glitch Removing Circuit using the concept of tolerance and tolerance-accumulation instead of PLL(DPLL, ADPLL). The main clock is 19.2MHz and the LF(Link Frequency) is determined as 40kHz to meet the local radio regulation in korea. As a result of simulations, the error-rate is zero within 15% tolerance of tag responses. And in the case of using the adaptive LF generation circuit, the error-rate varies from 0.000589 to zero between 15% and 22% tolerance of tag responses. In conclusion, the error-rate is zero between 0%-22% tolerance of tag response specified in ISO/IEC 18000-6C standard.

3상 모듈형 UPS용 PFC 제어기 설계

김상훈,박내춘,Kim, Sang-Hoon,Park, Nae-Chun 강원대학교 산업기술연구소 2011 産業技術硏究 Vol.31 No.2

In this paper a new PFC Controller for 3-Phase Modular UPS(Uninterruptible Power Supplies) is proposed. The PFC circuit for 3-Phase Modular UPS is implemented using three 1-phase 3-level boost PFC circuits. To control DC output voltage, single voltage controller considering imbalance of two capacitor voltages and to regulate AC input current three independent current controllers are used in proposed PFC controller. By the proposed method, without additional hardware, THD(Total Harmonic Distortion) of input currents can be readily limited below 5% which is the harmonic current requirements by IEEE std. 519. Its validity is verified by simulations and experiments.

새로운 이온빔장치를 사용한 Twisted Nematic-LCD의 전기광학특성

김상훈,황정연,장미혜,김귀열,서대식,Kim Sang-Hoon,Hwang Jeoung-Yeon,Jang Mi-Hye,Kim Gwi-Yeol,Seo Dae-Shik 한국전기전자재료학회 2006 전기전자재료학회논문지 Vol.19 No.6

We studied liquid crystal (LC) alignment with ion beam (IB) on polyimide and electro-optical characteristics of twisted nematic (TN)-liquid crystal display (LCD) on the polyimide surface using obliquely ion beam (IB) exposure with new IB type equipment. A good uniform alignment of the nematic liquid crystal (NLC) alignment with the ion beam exposure on the polyimide surface was observed. In addition, it can be achieved the good EO properties of the ion-beam-aligned TN-LCD on polyimide surface. Also, the EO characteristics of the ion-beam-aligned TN-LCD on a polyimide (PI) surface with ion beam exposure using new type IB equipment is same or more superior than ion-beam-aligned TN-LCD on a polyimide (PI) surface with ion beam exposure using Kaufman-type Ar ion gun.

과산화수소 제독 과정에서의 탄저균 전사체 분석

김상훈,김세계,정경화,윤성녀,김윤기,김민철,류삼곤,이해완,채영규,Kim, Sang Hoon,Kim, Se Kye,Jung, Kyoung Hwa,Yoon, Sung Nyo,Kim, Yun Ki,Kim, Min Cheol,Ryu, Sam Gon,Lee, Hae Wan,Chai, Young Gyu 한국군사과학기술학회 2015 한국군사과학기술학회지 Vol.18 No.4

Decontamination of biological agents utilizes hydrogen peroxide($H_2O_2$) for its effectiveness and safeness. Bacillus anthracis is a major target for $H_2O_2$ decontamination. To assess the effect of $H_2O_2$ on B. anthracis and identify biomarkers for decontamination, whole transcriptomic profiling of $H_2O_2$-treated B. anthracis was performed. Here we identified deregulation in stress response genes, transcription factors and cellular homeostasis genes. We also found that expression of antisense RNAs increased in B. anthracis during decontamination. We postulate that B. anthracis prioritizes survival and adaptation in response to $H_2O_2$ treatment by changing its gene expression pattern.

소실점을 이용한 3차원 재구성

김상훈,김태은,최종수,Kim, Sang-Hoon,Choi, Jong-Soo,Kim, Tae-Eun 한국정보처리학회 2003 정보처리학회논문지B Vol.10 No.5

본 논문에서는 2장의 영상으로부터 카메라 내부 파라미터를 추출하는 교정 방법을 제시한다. 카메라 교정은 2차원 영상으로부터 3차원 정보를 얻기 위해서는 필수 불가결한 기술이다. 기존의 많은 연구들이 수행되어 왔는데, 영상내에 체크 패턴을 포함한 3장의 영상을 이용하는 방법과 연속된 3장의 영상으로부터 Kruppa 방정식을 풀어 카메라 교정하는 방법이 대표적인 예가 되겠다. 본 논문에서는 인간이 만든 조형물에서 쉽게 발견할 수 있는 기하학적인 정보를 이용하여 보다 쉽고 빠르게 내부 파라미터를 추출한다. 이러한 내부 파라미터는 소실점들로부터 추정되며 대응되는 2장의 영상에서 대응점들로부터 외부 파라미터를 추출할 수 있다. 이렇게 교정된 내부, 외부 파라미터를 이용하여 사영 행렬을 유도하고, 유도된 사영행렬로 3차원 정보를 얻게 되고 3차원 재구성을 구현하게 된다. This paper proposes a calibration method from two images. Camera calibration is necessarily required to obtain 3D Information from 2D images. Previous works to accomplish the camera calibration needed the calibration object or required more than three images to calculate the Kruppa equation, however, we use the geometric constraints of parallelism and orthogonality can be easily presented in man-made scenes. The task of it is to obtain intrinsic and extrinsic camera parameters. The intrinsic parameters are evaluated from vanishing points and then the extrinsic parameters which are consisted of rotation matrix and translation vector of the camera are estimated from corresponding points of two views. From the calibrated parameters, we can recover the projection matrices for each view point. These projection matrices are used to recover 3D information of the scene and can be used to visualize new viewpoints.