http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김상교,오세종,이상준,백영진,박연희,Kim, Sang-Kyo,Oh, Se-Jong,Lee, Sang-Jun,Baek, Young-Jin,Park, Yun-Hee 한국미생물 · 생명공학회 1994 한국미생물·생명공학회지 Vol.22 No.5
Bacteriocin-producing lactic acid bacteria, Lactococcus sp. HY 449, was isolated from dairy products. Using response surface methodology, the various concentrations of medium compo- nents (tryptone, glucose, yeast extract, tween 80, and initial pH) were tested to find the optimum conditions for maximum bacteriocin production and growth of Lactococcus sp. HY 449. Central composite design was used to control the concentrations of medium components in the experiment. Bacteriocin production and cell growth of Lactococcus sp. HY 449 were most affected by glucose and yeast extract. Estimated optimum growth conditions of Lactococcus sp. HY 449 were as follows; tryptone 1.08%, glucose 1.129%, yeast extract 0.674%, tween 80 0.11%, and initial pH 7.19. Also estimated optimum conditions for bacteriocin production were tryptone 0.937%, glucose 1.108%, yeast extract 0.163%, tween 80 0.09%, and initial pH 6.98.
김상교(Sang-Kyo Kim),오충석(Chung-Seog Oh),이학주(Hak-Joo Lee) 한국비파괴검사학회 2010 한국비파괴검사학회지 Vol.30 No.5
박막은 마이크로 전자 장치, 자기 기록 매체, 미세 기전 시스템 및 표면 코팅과 같은 다양한 응용에 있어서 매우 중요한 역할을 수행하는 재료이다. 이러한 박막의 재료 물성 값은 상응하는 거시 재료의 물성 값과 다를 수 있기 때문에 박막의 기계적 물성 값들을 신뢰성 있게 측정할 수 있는 시험법의 개발이 요구되어져 왔다. 본 연구에서는 종래의 약 처짐 시험법과 단축 인장 시험법의 한계성을 극복하기 위해 나노미터 이하의 면외 변위 측정 분해능을 갖는 백색광 간섭계를 채택한 새롭고 간편한 시험법을 개발하였다. 개발된 시험법의 유효성을 검증해 보기 위하여 스퍼터링을 포함한 마이크로 공정에 의해 자유지지 알루미늄 박막 시험편을 제작한 뒤 이를 이용하여 인장 물성 값을 측정하였다. 폭 0.5 mm, 두께 1㎛인 시험편을 실리콘 다이상에 1~5개 제작하여 사용하였다. 모터 구동 팁, 하중계 및 6 자유도 정렬 장치로 구성된 시험기를 자체적으로 제작한 뒤 막 처짐 시험을 수행하였다. 시험기는 가능한 작게 제작하여 상용 백색광 간섭 현미경 아래에 설치 가능하도록 하였다. 백색광 간섭무늬를 이용하여 시험편과 시험기 사이의 정렬 맞춤을 수행하였다. 영 계수는 62 GPa, 항복점은 247 MPa로 측정되었다. Thin films play an important role in many technological applications including microelectronic devices, magnetic storage media, MEMS and surface coatings. It is well known that a thin film"s material properties can be very different from the corresponding bulk properties and thus there has been a strong need for the development of a reliable test method to measure the mechanical properties of a thin film. We have developed an alternative and convenient test method to overcome the limitations of previous membrane deflection experiment and uniaxial tensile test by adopting a white light interferometer having sub-nanometer out-of-plane displacement resolution. The freestanding aluminium specimens are tested to verity the effectiveness of the test method developed and get the tensile properties. The specimens are 0.5 rum wide, 1 ㎛ thick and fabricated through MEMS processes including sputtering. 1 to 5 specimens are fabricated on Si dies. The membrane deflection experiments are carried out by using a homemade tester consisted of a motor-driven loading tip, a load cell, and 6 DOF alignment stages. The test system is compact enough to set it up beneath a commercial white light interferometric microscope. The white light fringes are utilized to align a specimen with the tester. The Young"s modulus and yield point stress of the aluminium film are 62 GPa and 247 MPa, respectively.
가변속 운전에 따른 병렬 펌프 시스템의 에너지 절감 평가
이상혁(Sang Hyuk Lee),김재형(Jaehyung Kim),김상교(Sang Kyo Kim),정병창(Byung Chang Jung),윤인식(In-Sik Yoon),김기웅(Kiwoong Kim) 대한기계학회 2021 대한기계학회 춘추학술대회 Vol.2021 No.4
다양한 산업 현장에서 급수를 위하여 널리 사용되고 있는 펌프 시스템은 에너지 다소비 기기 중 하나로써, 최근 제조 공정에서 에너지 절감을 위하여 펌프 자체 성능 향상을 위한 설계<sup>(1)</sup> 뿐만 아니라 소비전력 저감을 위한 운전 방안<sup>(2)</sup>을 개선하기 위한 노력이 계속되고 있다. 그 일환으로 인버터를 활용하여 가변속 운전이 가능한 펌프 시스템에 대한 필요성이 대두되고 있다. 이에 본 연구에서는 병렬 설치된 펌프 시스템의 가변속 운전에 따른 정속 운전 대비 에너지 절감 특성을 평가하였다. 에너지 절감 특성을 파악하기 위하여 30kW 급 및 45kW 급 원심 펌프 4 대로 구성된 펌프 시스템을 구성하였으며, 해당 펌프 시스템의 요구 운전 특성을 적용하기 위하여 중대형 펌프 시스템을 설치/운영하는 냉난방시스템에 대해 수요량이 많은 여름철 현장 계측 유량 데이터를 기반으로 기본 펌프 사용률을 설정하여 시험 대상 펌프의 사양을 고려하여 최대 요구 유량을 적용하였다. 개별 펌프에 대하여 요구 유량을 충족하기 위한 펌프 회전수를 변경하는 가변속 운전을 통해 정속 운전 대비 소비전력이 17~22% 감소하는 특성을 파악하였다. 이를 기반으로 병렬 설치된 펌프 시스템에 대해 소비전력 최소화를 위하여 개별 펌프 회전수를 최적 운전 제어함으로 정속 운전 대비 약 25% 소비전력 절감 특성을 확인하였다. 이와 같은 펌프 시스템의 가변속 운전에 따른 소비전력 특성 연구 결과는 향후 에너지 절감을 위한 펌프 시스템의 운영에 활용될 수 있을 것으로 기대한다. Pumping system widely used for the water supply in various industrial fields is one of energy consuming devices. Recently, not only the pump design to improve the performance<sup>(1)</sup> but also the pump driving method to reduce the power consumption<sup>(2)</sup> have been investigated for the energy saving in the manufacturing and cooling processes. To reduce the power consumption, the variable speed drive of pump using an inverter is necessary for the optimal driving of pump. In the present study, the energy saving characteristics of parallel pumping system was experimentally evaluated by comparing the power consumption of variable speed driving pump with that of constant speed driving pump. To analyze the energy saving characteristics of pump system with various driving methods, a pump system consisting of four 30kW and 45kW centrifugal pumps was prepared. As the operating conditions of pump system, the test scenario including the required flowrate and pressure conditions is applied based on the measured flow data from the pump system used in the cooling and heating process. From the tests on each pump, the variable speed driving pump to satisfy the required flow and pressure conditions shows 17~22% decrease of power consumption with comparing to constant speed driving pump. Based on the performance and power consumption characteristics of pumps installed in the test facility, the optimal operation of variable speed driving pump system to minimize the power consumption of pump system leads to about 25% energy saving with comparing to the constant speed driving pump system using the bypass piping to apply the required flow and pressure conditions. The present results can be used for the design of pump systems with the energy saving pump operation.
홍성창(Sung Chang Hong),김재형(Jae Hyung Kim),송치성(Chi Sung Song),김병덕(Byoung Duk Kim),김상교(Sang Kyo Kim),김한수(Han Soo Kim) 대한기계학회 2010 대한기계학회 춘추학술대회 Vol.2010 No.11
CCCV(Controlled Closure Check Valve) has a role of sealing the reverse flow at the operation stop of pump for the protection the pump, valve, and the water tank. And the CCCV must have the capacity of the required design flow rate. In order to perform this function, the qualification of operation test under loading condition is required in the seismic condition according to ASME QME-1-2007. But the experimental method in vibration test has the difficulty in preparing the loading condition for fluid flow. So the numerical method is required in this situation. In this study, the numerical study on the operation test of the CCCV in the seismic condition was performed. The prediction of the variation of the operation of CCCV was performed considering the body's geometric condition and the loading condition by the design requirement and fluid flow.