http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
오스테나이트계 스테인레스강(STS304) 앵글 볼트 접합부의 구조적 거동에 관한 실험적 연구
김민성,김태수,김승훈,이용택,Kim, Min-Seong,Kim, Tae-Soo,Kim, Seung-Hun,Lee, Yong-Taeg 한국강구조학회 2011 韓國鋼構造學會 論文集 Vol.23 No.1
강구조물에서 접합부의 구조적 거동을 파악하기 위해서 국내외에서 많은 이론과 실험을 통한 연구가 진행되고 있다. 특히, 국내에서는 탄소강 ㄱ형강의 블록전단파단과 전단지체현상 등에 대한 연구가 수행되어 왔다. 본 연구에서는 오스테나이트계 스테인레스강 앵글의 하중방향의 연단거리와 볼트배열(1행 1열,1행 2열)을 주요변수로 실험체를 계획하여, 앵글 볼트 접합부의 파단형태와 면외변형의 영향을 조사한다. 또한, 현행 기준식에 의한 예측결과와 실험결과의 파단양상과 최대내력을 비교하고 면외변형으로 인한 내력저하정도를 평가한다. With regard to steel construction, many studies have been performed to examine the structural behavior of the bolted connections domestically and in other countries. Especially, a domestic study was conducted on the block shear fracture and shear lag effect on the single-bolted angle connection in carbon steel. In this study, specimens were prepared with the end distance parallel to the loading direction and bolt arrangement ($1{\times}1$, $1{\times}2$), as the main variables. Then the fracture mode and the curling effect on the bolted angle connection in austenitic stainless steel were investigated. Moreover, the fracture mode and ultimate strength were compared, and the strength reduction by curling was estimated.
윈드프로파일러 자료를 이용한 연안 지역 국지 바람장 모의
김민성,김광호,김박사,강동환,권병혁,Kim, Min-Seong,Kim, Kwang-Ho,Kim, Park-Sa,Kang, Dong-Hwan,Kwon, Byung Hyuk 해양환경안전학회 2016 海洋環境安全學會誌 Vol.22 No.2
본 연구에서는 3차원 바람장 생성을 위한 수치 모델의 상층기상 입력 자료로 윈드프로파일러 자료의 적용 가능성과 유용성을 조사했다. 10개 지점의 윈드프로파일러 자료와 기상 예측 모델 WRF의 결과를 기상진단 모델 CALMET에 입력하여 산출한 바람장을 8개 지역에서 관측된 라디오존데 자료와 통계적으로 비교 검증하였다. WRF 바람장 모의 결과를 CALMET에 적용하여 모의한 수평 풍속에 비해 1시간 간격의 윈드프로파일러 자료를 CALMET에 적용하여 모의한 수평 풍속이 평균 제곱근 오차 1.5 m/s 내에서 관측 결과와 일치하고 특히 연안 지역에서 해풍과 같은 국지적인 바람 변화를 잘 모의하였다. 풍향의 평균 제곱근 오차는 $50^{\circ}{\sim}70^{\circ}$로써 지형의 영향으로 오염된 윈드프로파일러의 풍향 오차에 기인한다. 윈드프로파일러 자료를 CALMET에 적용하면 대부분의 고도에서 상대적으로 정확한 바람을 신속하고 정확하게 모의할 수 있기 때문에 본 연구에서 제시하는 방법은 연안 지역의 기상뿐만 아니라 안전 환경 감시에 유용할 것으로 기대된다. In this paper, the applicability and usefulness of windprofiler input data were investigated to generate three dimensional wind field. A logical diagnostic model CALMET with windprofiler data at ten sites and with weather forecasting model WRF output was evaluated by statistically comparing with the radiosonde data at eight sites. The horizontal wind speed from CALMET simulated with hourly windprofiler data is in good agreement with radiosonde observations within 1.5 m/s of the root mean square error, especially local circulation of wind such as sea breeze over the coastal region. The root mean square error of wind direction ranged $50^{\circ}{\sim}70^{\circ}$ is due to the wind direction error from the windprofiler polluted by ground clutters. Since the exact wind can be produced quickly and accurately in most of the altitude with windprofiler data on CALMET, we expect the method presented in this study to be useful for the monitoring of safe environment as well as weather in the coastal zone.
ASxxxx Tool을 이용한 NH800 Cross-Assembler 구현
김민성 ( Min Seong Kim ),나여울 ( Yeoul Na ),김선욱 ( Seon Wook Kim ) 한국정보처리학회 2011 한국정보처리학회 학술대회논문집 Vol.18 No.2
스마트 기기의 급격한 발전, 의료분야와 IT 기술의 융합, 소비자들의 높아지는 요구로 인해 8 비트 이하 마이크로 컨트롤러의 활용도가 높아질 전망이다. 이 논문에서는 EISC구조의 8 비트 마이크로 컨트롤러인 NH800의 ISA를 소개하고, 마이크로 컨트롤러를 위한 오픈소스 컴파일러인 SDCC에서 사용하는 ASxxxx Tool을 이용한 NH800 어셈블러 포팅을 제시한다.
Slit-jet 노즐을 통해 분사되는 미립화된 액체연료의 분무량 변화에 따른 화염구조변이
김민성(Min Sung Kim),배성훈(Seong Hun Bae),배대석(Dae Seok Bae),김정수(Jeong Soo Kim) 한국추진공학회 2015 한국추진공학회 학술대회논문집 Vol.2015 No.11
초음파 진동자에 의해 미립화된 탄화수소계 액체연료를 분사하는 버너(burner)의 화염구조변이 관찰을 위한 실험이 수행되었다. DSLR과 슐리렌기법을 이용하여 미립화된 액체연료의 화염형상 및 화염주변 기류의 밀도구배를 가시화 하였으며, 영상후처리를 통해 그 구조를 면밀히 분석하였다. 그 결과 slit형 노즐을 통해 분무되는 액체연료의 화염형상은 slit의 양 끝단부가 중심부보다 높은 U자 형상으로 관찰되었다. 또한 연료 분무량이 증가하면 화염의 굽힘의 정도가 심해졌으며, 연소장의 난류발달도 가속화되었다. An experimental study was conducted to investigate a structural variation of the flame according to the quantitative change of the hydrocarbon liquid-fuel spray ultrasonically atomized. Configuration of the flame and density gradient in that zone were caught by DSLR camera using schlieren method, and images were analyzed in detail through post-processing. As results, the flame of liquid-fuel spray injected by a slit nozzle were observed as the U-shaped flame with both ends taller than the middle region. The flame become more bent and the turbulence of flame zone was more developed as the spray amount increased.
김민성(Min Seong Kim) 한국교육심리학회 2014 敎育心理硏究 Vol.28 No.1
본 연구에서는 인성의 의미와 인성교육의 실제를 살펴보면서 인성의 계발과 변화를 위한 교육 및 수업원리를 도출하고 구체적인 수업방안을 논의하였다. 인성은 삶의 모든 영역에 관여되어 있는 전인적이며 총체적인 인간 특성이 성품의 형태로 드러난 것으로, 도덕적이고 윤리적으로 진실하게 행동하는 측면 뿐 아니라 자신의 가능성을 실현하고자 노력하는 수행적인 측면까지 포함하는 것이다. 따라서 인성교육은 도덕적이고 윤리적인 가치뿐 아니라 교과교육에 참여하는 학습자의 사고, 태도, 행동까지도 포함하는 것이다. 인성교육에 대한 세 가지 주요 접근-덕목중심 인성교육, 인지발달론적 접근, 배려관계에 기반한 인성교육-을 효과적으로 수행한 학교의 공통된 특성에 기반하여 ``대화와 참여를 촉진하는 배움의 공동체 형성``이라는 교과수업에서의 인성교육의 원리를 도출하였다. 그리고 규칙에 대한 협의를 통해 경계 세우기, 대화와 참여가 일어나는 수업(학생의 삶과 연결되는 수업, 교사-학생, 학생-학생의 연결이 일어나는 수업, 역할을 가지고 참여하는 수업), 배려관계의 형성이라는 수업방안을 구체적인 사례와 함께 논의하였다. This study discusses instructional principles and methods for educating character, which were drawn on the meaning of character and characteristics of effective character education programs. In this study, the meaning of character involves moral character for successful interpersonal relationships with ethical conduct as well as performance character for realizing one`s potential for excellence. Thus, character education is to foster not only ethically desirable behaviors but also learners` attitude, thoughts, and behaviors conducive to fulfilling their potential. There were three main approaches to character education: Virtue oriented approach, cognitive developmental approach, and caring approach. Based on characteristics of effective character education programs, principles of character education were presented such as ``developing a learning community for promoting dialogue and participation`` with specified classroom teaching methods.