복시환자의 임상양상

김민석,최진,김정훈,김재석,이주화,Min Seok Kim,Jin Choi,Jung Hoon Kim,Jae Suk Kim,Joo Hwa Lee 대한안과학회 2013 대한안과학회지 Vol.54 No.11

Purpose: To evaluate the clinical features, causes and outcomes of patients with diplopia. Methods: All patients presenting with diplopia from October 2010 to March 2012 and followed up for more than 3 months were retrospectively investigated. Results: During the study period, 59 patients with diplopia were identified. There were 42 males and 17 females with an average age of 50 years. Binocular diplopia accounted for 54 cases (92%) and 5 cases (8%) had monocular diplopia. Cranial nerve palsies were the most common cause of binocular diplopia (28 cases, 52%). Within the cranial nerve palsies group, 14 cases (50%) were accompanied by hypertension or diabetes mellitus. Binocular diplopia spontaneously resolved in 35 cases (65%) by 3 months rising to 41 cases (76%) by 7 months. Thirteen (93%) out of 14 cases of cranial nerve palsies with hypertension or diabetes resolved spontaneously by 3 months. Conclusions: Binocular diplopia was caused most commonly by cranial nerve palsy and resolved after 3 months in 65% of patients. A spontaneous recovery from diplopia was observed after 3 months in 93% of patients with cranial nerve palsies and microvascular disease such as hypertension or diabetes. Therefore, the initial observation without additional treatment would be sufficient in these patients. J Korean Ophthalmol Soc 2013;54(11):1772-1777

열처리 및 단조조건에 따른 알루미늄 6056 소재의 특성변화 및 자동차의 피스톤 블록 설계

김민석,정병덕,박효영,최정묵,김정민,박준식,Kim, Min Seok,Jung, Hyung Duck,Park, Hyo young,Choi, Jeong Mook,Kim, Jeong Min,Park, Joon Sik 한국재료학회 2015 한국재료학회지 Vol.25 No.10

The mechanical properties and microstructures of Aluminum 6056 alloys were investigated for their use in the fabrication of a piton block. The EN-AW6056 alloys exhibited a tensile strength of 375 MPa for a solution treatment temperature of $550^{\circ}C$ for 2 h followed by an aging treatment at $190^{\circ}C$ for 4 h. The microstructures of the heat treated specimen showed that the $Mg_2Si$ phase with a size of 3~5 um was dispersed throughout the aluminum matrix when the heat treatment was done. Moreover, in order to identify the forgeability of the specimen, upsetting tests were done. For up to 80 % of the upsetting ratio, the specimen maintained its original shape, and at above 80 % of the upsetting ratio, the specimen underwent crack development. The specimen was successfully forged without any defects with the examined material conditions. The material conditions together with the forging conditions are discussed in terms of the microstructures and mechanical properties.

상호운용을 지원하는 코바 기반 공간 데이터 제공자의 설계 및 구현

김민석,안경환,홍봉희,Kim, Min-Seok,An, Kyoung-Hwan,Hong, Bong-Hee 한국공간정보학회 1999 개방형지리정보시스템학회 논문지 = Journal of the Korea Open Geogr Vol.1 No.2

CORBA와 같은 분산 컴퓨팅 환경에서 이종의 시스템 및 데이타베이스들의 통합을 위해 기존에는 포장자(wrapper)를 사용하였다. 이러한 여러 분야에 적용되는 포장자들 중에는 클라이언트에게 공통의 인터페이스를 제공하는 공간 데이타 제공자가 있다. 기존에는 공간 데이타 제공자를 데이타 소스별로 작성해야 하기 때문에 중복 구현과 구현 후의 변경 확장에 대한 문제가 있다. 이 논문에서는 공간 데이타 세공자의 재사용과 확장성을 위해 독립 포장자 객체와 종속 포장자 객체의 두개의 층으로 이루어진 새로운 구조를 제시한다. 종속 포장자 객체는 각 데이타소스에 대한 공간 데이타 작성시에 새로이 작성되야 하는 객체이고, 독립포장자 객체는 재사용될 수 있는 객체를 말한다. 또한 이 논문에서는 미들웨어에서 질의 처리 결과 유지 방법에 따른 구현 방법론을 제시한다. 질의 결과 유지 방법에는 질의 결과를 데이타로 유지하는 방법과 CORBA 객체로 변환하여 유지하는 방법으로 나뉘어진다. 각 방법에 대한 성능 평가 결과 CORBA 객체를 생성하는 방법의 비용이 상당히 높은 것을 알 수 있다. In distributed computing platforms like CORBA, wrappers are used to integrate heterogeneous systems or databases. A spatial data provider is one of the wrappers because it provides clients with uniform access interfaces to diverse data sources. The individual implementation of spatial data providers for each of different data sources is not efficient because of redundant coding of the wrapper modules. This paper presents a new architecture of the spatial data provider which consists of two layered objects : independent wrapper components and dependent wrapper components. Independent wrapper components would be reused for implementing a new data provider for a new data source, which dependent wrapper components should be newly coded for every data source. This paper furthermore discussed the issues of implementing the representation of query results in the middleware. There are two methods of keeping query results in the middleware. One is to keep query results as non-CORBA objects and the other is to transform query results into CORBA objects. The evaluation of the above two methods shows that the cost of making CORBA objects is very expensive.

이산형 2자유도 제어기를 이용한 이송계의 통합설계 (II) -통합설계의 정식화와 해석-

김민석,정성종,Kim, Min-Seok,Chung, Sung-Chong 대한기계학회 2004 大韓機械學會論文集A Vol.28 No.7

In order to acquire high-speed and high-precision performances in servomechanisms, an integrated design method have been proposed. Based on strict mathematical modeling and analysis of system performance according to design and operating parameters, a nonlinear constrained optimization problem including the relevant subsystem parameters of the servomechanism is formulated. Optimum design results of mechanical and electrical parameters are obtained according to the design parameters specified by designers through the integrated design processes. Motors are optimally selected from the servo motor database. Both the geometric errors referring to Abbe offset and the contour errors are minimized while required constraints such as stability conditions and saturated conditions are satisfied. This design methodology both offers the improved possibility to evaluate and optimize the dynamic motion performance of the servomechanism and improves the quality of the design process to achieve the required performance for high-speed/precision servomechanisms.

BTMSM/$O_2$ 고유량으로 증착된 low-k SiOCH 박막의 전기적인 특성

김민석,황창수,김홍배,Kim, Min-Seok,Hwang, Chang-Su,Kim, Hong-Bae 한국반도체디스플레이기술학회 2008 반도체디스플레이기술학회지 Vol.7 No.1

We studied the electrical characteristics of low-k SiOCR interlayer dielectric(ILD) films fabricated by plasma enhanced chemical vapor deposition (PECVD). The precursor bis-trimethylsilylmethane (BTMSM) was introduced into the reaction chamber with the various flow rates. The absorption intensities of Si-O-$CH_x$, bonding group and Si-$CH_x$, bonding group changed synchronously for the variation of precursor flow rate, but the intensity of Si-O-Si(C) responded asynchronously with the $CH_x$, combined bonds. The SiOCH films revealed ultra low dielectric constant around 2.1(1) and reduced further below 2.0 by heat treatments.

강우의 시간해상도와 자료기간에 따른 설계홍수량의 변동성

김민석,이정환,문영일,Kim, Min-Seok,Lee, Jung-Hwan,Moon, Young-Il 한국수자원학회 2018 한국수자원학회논문집 Vol.51 No.7

대부분의 수문분석은 시 단위 강우를 기반으로 확률강우량과 강우시간분포를 산정하고, 확률강우량과 강우시간분포의 자료기간을 달리 적용하는 방법으로 강우-유출분석을 수행하고 있다. 본 연구에서는 자료형태(시 단위와 분 단위 강우자료)와 확률강우량과 강우시간분포의 다른 자료기간 적용에 따른 설계홍수량 변화를 정량화 하고자, 자료형태와 자료기간에 따라 지점빈도해석을 통한 확률강우량 산정과 Huff의 4분위 방법을 통한 강우시간분포를 산정하였다. 또한, 확률강우량과 설계강우 시간분포의 자료기간을 달리 적용한 강우-유출분석으로 설계홍수량 변동분석을 실시하였다. 분석결과, 자료형태에서는 분 단위 강우가 시 단위 강우보다 더욱 정확하고 효과적인 강우분석을 수행할 수 있는 것으로 나타났으며, 확률 강우량과 강우시간분포의 다른 자료기간을 적용하여 산정된 설계홍수량의 차 보다 자료형식에 따른 설계홍수량 결과가 보다 큰 차이를 보이는 것으로 나타났다. 이는 향후 분 단위 강우를 활용한 수문분석에 크게 기여할 것으로 판단된다. Most hydrological analysis such as probability rainfall and rainfall time distributions have typically carried out based on hourly rainfall and rainfall - runoff analysis have carried out by applying different periods of rainfall time distribution and probability rainfall. In this study, to quantify the change of design flood due to the data type (hourly and minutely rainfall data) and the probability rainfall and application of different data period to the rainfall time distribution, probability rainfall is calculated by point frequency analysis according to data type and period and rainfall time distribution was calculated by Huff's quartile distributions. In addition, the change analysis of design flood was carried out by rainfall - runoff analysis applying different data periods of design rainfall time distribution. and probability rainfall. As a result, rainfall analysis using minute rainfall data was more accurate and effective than using hourly rainfall data. And the design flood calculated by applying different data period of rainfall time distribution and probability rainfall made a large difference than by applying different data type. It is expected that this will contribute to the hydrological analysis using minutely rainfall.

2.3 GHz 대역에서 단일 Half-LO 주파수를 이용한 Double-Conversion Down Mixer 설계

김민석,문주영,윤상원,Kim Min-Seok,Moon Ju-Young,Yun Sang-Won 한국전자파학회 2006 한국전자파학회논문지 Vol.17 No.8

본 논문에서는 Half-LO 주파수를 이용하는 새로운 방식의 double-conversion down mixer를 2.3 GHz 대역에서 설계하였다. 제안된 mixer에서는 Half-LO 주파수를 2개의 HEMT에 인가하여 두 HEMT에서의 변환 방식을 gate type과 resistive type으로 다르게 함으로서 IF 주파수를 얻게 된다. 기존의 sub-harmonic mixers와 같이 Half-LO 주파수를 사용하지만 제안된 mixer는 Half-LO의 second harmonic 성분을 이용하지 않고 Half-LO의 기본 주파수를 이용하여 주파수 변환을 하고 두 번째 HEMT에서 Resistive mixer type으로 IF 신호를 얻기 때문에 기존의 능동 mixer보다 향상된 선형성을 얻을 수 있다. 2.3 GHz 대역에서 설계 제작된 mixer는 Half-LO 전력 10 dBm을 이용하여 5dB의 변환 손실과 16.25dBm의 IIP3 특성을 얻을 수 있었다. In this paper, we designed the double conversion down mixer by using Half-LO frequency in 2.3 GHz band. The IF frequency is obtained by supplying two LO frequencies to HEMT in both gate type and resistive type. The proposed mixer uses Half-LO frequency the same way as conventional sub-harmonic mixers. However the proposed one uses fundamental component of Half-LO frequency in first stage instead of using second harmonic components of Half-LO frequency, and the IF frequency is obtained by resistive type mixer in second stage, thereby the proposed mixer can improve linearity in comparison with conventional active mixer. We can verify that the proposed mixer has an conversion loss of 5dBm and IIP3 of 16.25dBm by using 10 dBm Power.

Greedy Kernel PCA를 이용한 화자식별

김민석,양일호,유하진,Kim, Min-Seok,Yang, Il-Ho,Yu, Ha-Jin 대한음성학회 2008 말소리 Vol.66 No.-

In this research, we propose a speaker identification system using a kernel method which is expected to model the non-linearity of speech features well. We have been using principal component analysis (PCA) successfully, and extended to kernel PCA, which is used for many pattern recognition tasks such as face recognition. However, we cannot use kernel PCA for speaker identification directly because the storage required for the kernel matrix grows quadratically, and the computational cost grows linearly (computing eigenvector of $l{\times}l$ matrix) with the number of training vectors I. Therefore, we use greedy kernel PCA which can approximate kernel PCA with small representation error. In the experiments, we compare the accuracy of the greedy kernel PCA with the baseline Gaussian mixture models using MFCCs and PCA. As the results with limited enrollment data show, the greedy kernel PCA outperforms conventional methods.

Functional Independence Measure를 이용한 뇌졸중(腦卒中) 환자의 임상적 관찰

김민석,정승현,신길조,이원철,Kim, Min-Seok,Jung, Seung-Hyun,Shin, Gil-Cho,Lee, Won-Chul 대한한방내과학회 1998 大韓韓方內科學會誌 Vol.19 No.1

BACKGROUND The purpose of this study was to investigate disability of the patients after stroke, clinical applicability and usefulness of the FIM in evaluating the functional abilities and to assess the characteristics of the patients after stroke. And this study examined difference by predictive factors on the treatment outcome. METHOD The study was composed of 31 stroke patients who were within 1 week after stroke and had been treated in hospital more than 4 weeks. Improving rate was measured by using the Functional Independence Measure(FIM), and the correlation was analyzed between Motor FIM and Cognitive FIM. We analyzed significant meaning statistically in the mean value of FIM. RESULT 1. There was no significant meaning statistically in the mean value of FIM that was between both at admission and after 2 weeks. But there was proportional correlation between both at admission and after 4 weeks, and significant meaning statistically. 2. There was proportional correlation between both FIM and Motor FIM, and significant meaning statistically. But there was no significant meaning statistically between both FIM and Cognitive FIM. 3. There was no significant meaning statistically between both FIM and sex, age, side of weakness, stroke subtype, hypertension, hypercholesterolemia, diabetes mellitus, heart disease, starting point of rehabilitation therapy and past history of cerebral vascular accident. While dysarthria affected functional recovery in stroke patients, and significant meaning statistically. CONCLUSION 1. FIM appeared to be a valid and reliable method to measure the functional abilities of the patients after stroke. 2. Only one thing between Motor FIM and score didn't influence FIM score. 3. Dysarthria affected functional recovery in stroke patients, and it is the statistically significant factor.

분 단위 강우자료의 품질 개선방안에 관한 연구

김민석,문영일,Kim, Min-Seok,Moon, Young-Il 대한토목학회 2015 대한토목학회논문집 Vol.35 No.2

수자원 설계 및 홍수 예 경보 등을 위한 수문분석 시, 강우자료는 필수요소이다. 현재 수문분석 시 비교적 장기간의 자료를 보유하고 있는 기상청, 국토교통부 등의 지상기상관측지점(SSS, Surface Synoptic Stations)에 시 강우자료를 이용하고 있으나, 집중호우가 빈번히 발생하는 현실정과 집중호우의 발생빈도가 증가할 것으로 예상되는 향후에는 더욱 조밀한 관측망을 구성하고 있는 방재기상관측지점(AWS, Automatic Weather Stations)의 분 단위 강우자료를 이용한 분석이 필요하다. 그러나 방재기상관측지점의 분 단위 강우자료는 자동으로 관측되고 있어, 자료품질에 대한 문제점이 매번 지적되고 있다. 본 연구에서는 서울지역을 중심으로 기상청 방재기상관측지점의 분 단위 강우자료의 품질개선 방안에 관한 연구를 실시하였다. 분 단위 강우자료의 품질관리방안은 크게 3단계로 결측치 품질관리, 이상치 품질관리 그리고 강우 보완 품질관리로 구분하여 품질관리 방안을 제시하고 분석을 수행하였다. 마지막으로 서울지점의 분 단위 강우자료와 시 단위 강우자료의 비교분석을 통해 강우 품질관리에 대한 평가를 실시하였다. 이는 향후 분 단위 강우자료를 이용한 수문분석 시, 강우자료 품질관리 방안으로 활용될 것으로 판단된다. Rainfall data is necessary component for water resources design and flood warning system. Most analysis are used long-term hourly data of surface synoptic stations from the Meteorological Administration, Ministry of land, Infrastructure and Transport and others. However, It will be used minutely data of more high density automatic weather stations than surface synoptic stations expecting to increase the frequency of heavy precipitation. But minutely data has a problem about quality of rainfall data by auto observation. This study analyzed about quality control method using automatic weather station's minutely rainfall data of meteorological administration. It was performed assessment of the quality control that was classified quality control of miss Data, outlier data and rainfall interpolation. This method will be utilized when hydrological analysis uses minute rainfall data.