http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
전해생성(電解生成)된 염소(鹽素)에 의한 폐인쇄회로기판(廢印刷會路基板)으로부터 동(銅)의 침출(浸出)
김민석,이재천,정진기,김병수,김은영,Kim, Min-Seuk,Lee, Jae-Chun,Jeong, Jin-Ki,Kim, Byung-Su,Kim, Eun-Young 한국자원리싸이클링학회 2005 資源 리싸이클링 Vol.14 No.5
염산용액에서 전해생성 된 염소를 이용하여 폐프린터의 인쇄회로기판으로부터 동을 침출하는 연구를 수행하였다. 폐인쇄회로기판을 분쇄한 다음 입자크기가 $0.6{\sim}1.2mm$인 비자성 성분을 선별하여 침출실험을 행하였다. 비자성 분쇄물 중 금속성분의 평균함량은 45wt%이었으며, 동이 금속성분의 83.6wt% 이었다. 1 M 염산용액에서 전해생성된 염소에 의한 동의 침출반응은 전류밀도와 교반속도에 크게 영향을 받았다. 염산농도: 1 M, 전류밀도: $20mA/cm^2$, 침출온도: $50^{\circ}C$, 침출시간: 180분, 교반속도: 600rpm의 침출조건에서 동의 침출율은 98%로서 침출액에서 농도는 3.69g/l 해당하였다. 동의 침출반응에 대한 전해생성 된 염소의 이용율은 교반속도가 높고 인가전류밀도가 낮을 수록 높았다. 또한 침출반응 초기에는 알루미늄, 납, 주석 등의 기타금속 성분의 침출이 활발하고 동의 침출반응은 억제되었다. Electro-generated chlorine leaching of waste printed circuit boards was investigated in hydrochloric acid solutions. Non-magnetic component of $0.6{\sim}1.2mm$ was prepared by grinding, magnetic separation, and sieving. The non-magnetic component of pulverized printed circuit board contained about 45% of metal component, in which copper was about 83.6%. The leaching rate of copper was greatly affected by current density and agitation speed. The leaching of copper up to 98% was achieved at $20mA/cm^2$, $50^{\circ}C$, 180 minutes, and 600 rpm in 1M HCl solutions. Increasing agitation and lowering current density enhanced utilization efficiency of electro-generated chlorine. Leaching of copper was suppressed at the initial stage, while the minor metal elements, such as aluminum, lead, and tin, were dominantly leached out.
김민석,박인애,박선후,박성신,김활웅,문경철,김영아,이혜승,박기화,서정욱,이현순,함의근,Kim, Min-Suk,Park, In-Ae,Park, Sun-Hoo,Park, Sung-Shin,Kim, Hwal-Wong,Moon, Kyung-Chul,Kim, Young-Ah,Lee, Hye-Seung,Park, Ki-Wha,Seo, Jeoug-Wook,Lee, Hy 대한세포병리학회 1999 대한세포병리학회지 Vol.10 No.1
The authors analysed 2,653 cases of transthoracic fine needle aspiration cytology of the lung to evaluate the diagnostic accuracy and its limitation. A comparison was made between the original cytologic and the final histologic diagnoses on 1,149 cases from 1,074 patients. A diagnosis of malignancy was established in 38.3% benign in 48.1%, atypical lesion in 2.3%, and inadequate one in 11.9% of the cases. Statistical data on cytologic diagnoses were as follows; specificity 98.9%: sensitivity of procedure, 76.8%: sensitivity of diagnosis, 95.5%: false positive 5 cases: false negative 18 cases: predictive value for malignancy, 98.8%: predictive value for benign lesion, 79.5%: overall diagnostic efficiency, 87.5%: typing accuracy in malignant tumor, 80%.
자동차(自動車) 폐촉매(廢觸媒)의 침출액(浸出液)으로부터 시멘테이션에 의한 백금족(白金族) 금속(金屬)의 회수(回收)
김민석,김병수,김은영,김수경,류재욱,이재천,Kim, Min-Seuk,Kim, Byung-Su,Kim, Eun-Young,Kim, Soo-Kyung,Ryu, Jae-Wook,Lee, Jae-Chun 한국자원리싸이클링학회 2011 資源 리싸이클링 Vol.20 No.4
금속분말을 환원제로 사용하는 시멘테이션에 의하여 자동차 폐촉매의 침출액과 침출잔사의 세척액으로부터 백금족 금속을 환원 석출시켜 회수하는 연구를 수행하였다. 환원제로 사용한 알루미늄, 마그네슘 그리고 아연이 백금족 금속의 시멘테이션에 미치는 영향을 조사하였으며 알루미늄을 최적 환원제로 선정하였다. 침출액에 19.3 당량의 알루미늄을 첨가하고 $50{\sim}60^{\circ}C$에서 10분간 시멘테이션을 행하였을 때 백금, 팔라듐, 로듐의 환원석출율은 각각 99.3%, 99.4%, 90.2% 정도 이었다. 또한 세척액에 알루미늄을 45 당량 투입한 후 시멘터이션 반응을 통해 백금, 팔라륨, 로듐을 각각 97%, 97%, 90% 회수할 수 있었다. 그리고 회수한 환원석출물의 금속불순물들을 질산침출로 제거함으로써 백금족 금속의 품위를 약 10% 정도 향상시킬 수 있었다. The recovery of platinum group metals (PGMs) from the leach solution of spent auto-catalyst and the wash solution of the leach residue was investigated in the laboratory scale experiments by the cementation process using metal powders as the reductant. In this study, the effect of Al, Mg and Zn powders on the cementation process was particularly examined. Aluminum powder was selected as the most suitable reductant for the cementation of PGMs. At the cementation time of 10 minute under the aluminium stoichimetric amount of 19.3 and the reaction temperature of $50{\sim}60^{\circ}C$, the recovery of platinum group metals from the leach solution of the spent auto-catalyst was found to be 99.3%, 99.4%, 90.2% for Pt, Pd and Rh, respectively. Under the same conditions with the aluminium stoichimetric amount of 45, the recovery of platinum group metals from the wash solution of the leach residue of spent catalyst was observed to be 97%, 97% and 90% for Pt, Pd and Rh, respectively. In addition, it was possible to upgrade the platinum group metals in the precipitates obtained from the cementation process by about 10% through the removal of metal impurities by the nitric acid leaching at ambient temperature.
김민석,최진,김정훈,김재석,이주화,Min Seok Kim,Jin Choi,Jung Hoon Kim,Jae Suk Kim,Joo Hwa Lee 대한안과학회 2013 대한안과학회지 Vol.54 No.11
Purpose: To evaluate the clinical features, causes and outcomes of patients with diplopia. Methods: All patients presenting with diplopia from October 2010 to March 2012 and followed up for more than 3 months were retrospectively investigated. Results: During the study period, 59 patients with diplopia were identified. There were 42 males and 17 females with an average age of 50 years. Binocular diplopia accounted for 54 cases (92%) and 5 cases (8%) had monocular diplopia. Cranial nerve palsies were the most common cause of binocular diplopia (28 cases, 52%). Within the cranial nerve palsies group, 14 cases (50%) were accompanied by hypertension or diabetes mellitus. Binocular diplopia spontaneously resolved in 35 cases (65%) by 3 months rising to 41 cases (76%) by 7 months. Thirteen (93%) out of 14 cases of cranial nerve palsies with hypertension or diabetes resolved spontaneously by 3 months. Conclusions: Binocular diplopia was caused most commonly by cranial nerve palsy and resolved after 3 months in 65% of patients. A spontaneous recovery from diplopia was observed after 3 months in 93% of patients with cranial nerve palsies and microvascular disease such as hypertension or diabetes. Therefore, the initial observation without additional treatment would be sufficient in these patients. J Korean Ophthalmol Soc 2013;54(11):1772-1777
실리콘 웨이퍼 에칭공정으로부터 발생(發生)된 폐산(廢酸)을 이용(利用)한 스테인리스 스틸의 산세거동(酸洗擧動) 연구(硏究)
김민석,안종관,김홍인,김주엽,안재우,Kim, Min-Seuk,Ahn, Jong-Gwan,Kim, Hong-In,Kim, Ju-Yup,Ahn, Jae-Woo 한국자원리싸이클링학회 2008 資源 리싸이클링 Vol.17 No.2
실리콘 웨이퍼 에칭공정에서 발생하는 폐산을 스테인리스 스틸 산세공정에서 재활용하고자 이를 이용한 산세 거동을 조사하였다. 폐산 원액은 $19.6g/L^{-1}$ 실리콘을 함유한 불산, 질산 및 초산의 혼산이었으며 침전법에 의한 실리콘 제거 전후 폐산들을 이용하여 304 스테인레스 스틸 표면 산화막의 제거 시 측정된 open circuit potential(OCP) 변화 거동은 매우 상이하였다. 폐산 원액을 사용한 경우에는 OCP가 높고 연속적인 변화를 보이는데 비하여 실리콘 제거 공정에서 얻어진 용액의 경우에는 불연속적인 OCP변화와 전위요동현상이 나타났다. 이러한 거동의 차이는 표면 부동태막의 형성 및 제거와 공식이 발생하는 정도의 차이에 기인하는 것으로 생각되며, 실리콘 제거 공정에서 산도가 낮아진 폐산에서 산화막 제거속도가 높고 공식발생이 현저하였다. 산세 후 시료의 표면 광택도에 가장 큰 영향을 주는 것은 산세 온도였으며, 산세온도가 높아질수록 표면 광택도는 감소하였다. 동일 산세 조건에서는 폐산 원액을 사용한 경우가 실리콘을 제거공정으로부터 얻어진 용액을 사용한 경우보다 광택도가 높았다. Pickling of oxidized 304 stainless steel has been investigated using rotating disk electrode in waste acid solutions generated from the etching process of silicon wafer in order to recycle them. The waste acid solution contained acetic, nitric, hydrofluoric acids, and silicon of $19.6g/L^{-1}$. Electrochemical behavior during the pickling was distinctively different between the original and silicon-removed acid solutions. Open circuit potential was continuously changed in the original solution, while it was discontinuously changed and fluctuated in the silicon-removed solution. Fast and abrupt removal of surface oxide layer with severe pitting was observed in the silicon-removed solution. It was found that solution temperature had the most influential effect on glossiness. Surface glossiness after pickling was decreased with solution temperature. At the same condition, the glossiness was higher in the original solution than in the silicon-removed solution.
Prone Breast Phantom을 이용한 couch 산란영향 평가
김민석,전수동,배선명,백금문,송흥권,Kim, Min Seok,Jeon, Soo Dong,Bae, Sun Myeong,Baek, Geum Mun,Song, Heung Gwon 대한방사선치료학회 2017 대한방사선치료학회지 Vol.29 No.2
목 적: 유방암 환자의 방사선치료 시 엎드린 자세를 적용하면 폐와 심장에 들어가는 선량을 줄일 수 있다. 하지만 빔 방향에 포함되는 couch의 영향으로 피부선량 증가 및 심부선량이 감소한다. 따라서 본 실험에서는 air gap을 이용해서 couch로 인한 영향을 줄일 수 있는 방법을 알아보고자 하였다. 대상 및 방법: 본원에서 치료 받은 유방암 환자의 전산화단층영상을 바탕으로 3D 프린터(Builder Extreme 1000)를 이용하여 체적을 동일하게 묘사한 인체모형을 제작하였다. 제작한 인체모형을 전산화단층촬영하고 전산화치료계획시스템(Eclipse 13.6, Varian, USA)을 이용하여 6MV, Field-in-Field technique을 이용한 200 cGy/fx의 치료계획을 수립하였다. 피부선량 측정을 위해 내, 외측 4 지점(Med 1, Med 2, Lat 1, Lat 2)에서 광자극발광선량계(Optically Stimulated Luminescence Detector, OSLD)를 이용한 측정을 진행하였고, 심부선량 측정을 위해 유방의 전면과 후면의 2 지점(Anterior, Posterior)에서 FC65-G ion-chamber를 이용한 측정을 하였다. Couch와 인체모형 사이의 air gap(기준 3 cm)을 1 cm 씩 총 6 cm까지 증가시켜가며 측정하였으며 치료계획 선량을 기준으로 평가하였다. 결 과: 피부선량 측정 결과 외측 지점은 치료계획과 비교하여 ${\pm}5%$ 이내의 유사한 값을 보였다. 내측 1 지점은 air gap이 증가할수록 감소하며 3 cm 이상부터 7 % 이상 감소하였고, 내측 2 지점은 4 % 이상 감소하였다. 심부선량 측정 결과 후면 지점은 air gap 차이에 의한 선량변화가 ${\pm}1%$ 이내의 값을 보였다. 전면 지점의 선량은 air gap이 증가할수록 높아지며 3 cm 이상부터 치료계획 보다 4 % 증가한 값을 보였다. 결 론: 본 실험을 통해 couch와 인체모형 사이의 air gap을 특정 거리까지 증가시켰을 때 couch로 인한 피부선량과 심부선량의 영향이 감소함을 확인하였다. 따라서 유방암 환자에 대한 치료 전 선량평가를 진행하여 각 환자에게 최적의 air gap을 적용한다면 피부보효 효과를 높일 수 있고, 정확한 심부선량의 전달이 가능할 것으로 사료된다. Purpose: The purpose of this study is to evaluate the dosimetric effects of couch attenuation and air gaps using 3D phantom for prone breast radiation therapy. Materials and method: A 3D printer(Builder Extreme 1000) and computed tomography (CT) images of a breast cancer patient were used to manufacture the customized breast phantom. Eclipse External Beam Planning 13.6 (Varian Medical Systems Palo Alto, CA, USA) was used to create the treatment plan with a dose of 200 cGy per fraction with 6 MV energy. The Optically Stimulated Luminescence Detector(OSLD) was used to measure the skin dose at four points (Med 1, Med 2, Lat 1, Lat 2) on the 3D phantom and ion-chamber (FC65-G) were used to perform the in-vivo dosimetry at the two points (Anterior, Posterior). The Skin dose and in-vivo dosimetry were measured with reference air gap (3 cm) and increased air gaps (1, 2, 3, 4, 5, 6 cm) from reference distance between the couch and 3D phantom. Results: As a result, measurement for the skin dose at lateral point showed a similar value within ${\pm}4%$ compared to the plan. While the air gap increased, skin dose at medial 1 was reduced. And it was also reduced over 7 % when the air gap was more than 3 cm compared to radiation therapy plan. At medial 2 it was reduced over 4 % as well. The changes of dose from variety of the air gap showed similar value within ${\pm}1%$ at posterior. As the air gap was increased, the dose at anterior was also increased and it was increased by 1 % from the air gap distance more than 3 cm. Conclusion: Dosimetrical measurement using 3D phantom is very useful to evaluate the dosimetric effects of couch attenuation and air gaps for prone breast radiation therapy. And it is possible to reduce the skin dose and increase the accuracy of the radiation dose delivery by appling the optimized air gap.
전력 역변환장치 주요발열부의 열 저감 시스템 변위에 따른 냉각 특성해석
김민석,김용재,Kim, Min-Seok,Kim, Yong-Jae 한국전자통신학회 2015 한국전자통신학회 논문지 Vol.10 No.2
신재생에너지용 발전 시스템은 모듈, 직류 전력을 교류 전력으로 변환시키는 전력 역변환장치, 전력흐름을 제어하고 계통 연계를 담당하는 제어장치로 구성된다. 이러한 시스템은 일사량이 많은 여름철 및 낮 시간에 가장 많은 직류전력을 생산하지만 계통의 연계를 위해 필수적인 전력 역변환장치는 특정 온도 이상으로 상승하면 효율이 급격히 감소하게 된다. 따라서 열전소자를 부착한 열 저감 시스템을 제안하고 가장 발열이 심한 구간을 선정하여 사용개수 및 위치에 따른 온도 특성 해석을 통해 최적 모델을 도출하고자 한다. Power system for renewable energy is composed of module, transform DC power into AC power inverter, control power flow and device for a charge of the grid-connected. Power system for renewable energy produce the most DC power, when this system is much insolation in summer and daytime. But if the certain temperature rises above, the essential grid-connected power inverter is take a nose dive. There, in this paper, we propose an improved reduction of heating system. In addition, selection of the most serious heat region and through analysis of temperature characteristics according to location and distance derive the optimal model.
초소형 프로젝터를 위한 디지털 LCOS 마이크로 디스플레이의 계조 연구
김민석,강정원,Kim, Min-Seok,Kang, Jung-Won 한국반도체디스플레이기술학회 2010 반도체디스플레이기술학회지 Vol.9 No.2
A new SRAM pixel circuit with RESET Transistor of a LCOS display module was designed for a pico-projector application. A dual-block PWM method was also proposed to realize the field sequential color system having only one LCOS panel. 0.29 inch LCOS panel in SVGA resolution was fabricated and the proposed dual-block PWM method was tested with it. Discontinuity of brightness curve was caused due to multi-pulses and it was improved by the adoption of proper mapping table. With the proposed SRAM with RESET pixel circuit and dual-block PWM method, the test images were successfully demonstrated.
열처리 및 단조조건에 따른 알루미늄 6056 소재의 특성변화 및 자동차의 피스톤 블록 설계
김민석,정병덕,박효영,최정묵,김정민,박준식,Kim, Min Seok,Jung, Hyung Duck,Park, Hyo young,Choi, Jeong Mook,Kim, Jeong Min,Park, Joon Sik 한국재료학회 2015 한국재료학회지 Vol.25 No.10
The mechanical properties and microstructures of Aluminum 6056 alloys were investigated for their use in the fabrication of a piton block. The EN-AW6056 alloys exhibited a tensile strength of 375 MPa for a solution treatment temperature of $550^{\circ}C$ for 2 h followed by an aging treatment at $190^{\circ}C$ for 4 h. The microstructures of the heat treated specimen showed that the $Mg_2Si$ phase with a size of 3~5 um was dispersed throughout the aluminum matrix when the heat treatment was done. Moreover, in order to identify the forgeability of the specimen, upsetting tests were done. For up to 80 % of the upsetting ratio, the specimen maintained its original shape, and at above 80 % of the upsetting ratio, the specimen underwent crack development. The specimen was successfully forged without any defects with the examined material conditions. The material conditions together with the forging conditions are discussed in terms of the microstructures and mechanical properties.
Functional Independence Measure를 이용한 뇌졸중(腦卒中) 환자의 임상적 관찰
김민석,정승현,신길조,이원철,Kim, Min-Seok,Jung, Seung-Hyun,Shin, Gil-Cho,Lee, Won-Chul 대한한방내과학회 1998 大韓韓方內科學會誌 Vol.19 No.1
BACKGROUND The purpose of this study was to investigate disability of the patients after stroke, clinical applicability and usefulness of the FIM in evaluating the functional abilities and to assess the characteristics of the patients after stroke. And this study examined difference by predictive factors on the treatment outcome. METHOD The study was composed of 31 stroke patients who were within 1 week after stroke and had been treated in hospital more than 4 weeks. Improving rate was measured by using the Functional Independence Measure(FIM), and the correlation was analyzed between Motor FIM and Cognitive FIM. We analyzed significant meaning statistically in the mean value of FIM. RESULT 1. There was no significant meaning statistically in the mean value of FIM that was between both at admission and after 2 weeks. But there was proportional correlation between both at admission and after 4 weeks, and significant meaning statistically. 2. There was proportional correlation between both FIM and Motor FIM, and significant meaning statistically. But there was no significant meaning statistically between both FIM and Cognitive FIM. 3. There was no significant meaning statistically between both FIM and sex, age, side of weakness, stroke subtype, hypertension, hypercholesterolemia, diabetes mellitus, heart disease, starting point of rehabilitation therapy and past history of cerebral vascular accident. While dysarthria affected functional recovery in stroke patients, and significant meaning statistically. CONCLUSION 1. FIM appeared to be a valid and reliable method to measure the functional abilities of the patients after stroke. 2. Only one thing between Motor FIM and score didn't influence FIM score. 3. Dysarthria affected functional recovery in stroke patients, and it is the statistically significant factor.