http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
등온반응기와 단열반응기 조합으로 구성된 0.25 MW급 메탄합성 파일롯 공정 운전특성
김수현(Suhyun Kim),유영돈(Youngdon Yoo),강석환(Sukhwan Kang),류재홍(Jaehong Ryu),김진호(Jinho Kim),김문현(Munhyun Kim),고동준(Dongjun Koh),이현정(Hyunjung Lee),김광준(Gwangjun Kim),김형택(Hyungtaek Kim) 한국청정기술학회 2013 청정기술 Vol.19 No.2
본 연구에서는 등온반응기와 단열반응기로 구성된 0.25 MW 메탄합성 파일롯 공정 실험을 통한 운전 특성을 분석하였다. 등온반응기는 메탄합성 반응을 통해 발생하는 열을 포화수의 유량과 압력을 통해 강제적으로 제어할 수 있는 반응기로 등온반응기와 단열반응기를 조합할 경우 기존 단열반응기만으로 구성된 메탄합성 공정에 비해 반응기 개수를 줄일 수 있다. 또한 합성가스 재순환이 불필요하기 때문에 단열반응기 조합으로 구성된 메탄합성 공정에서 비용의 약 15~20%를 차지하는 재순환 압축기를 제거할 수 있다. 등온반응기로 유입되는 합성가스의 H2/CO 비가 3보다 낮은 경우에는 튜브에 충진된 촉매에 탄소 침적 현상이 일어나 반응기의 차압이 증가하였으며, H₂/CO 비가 3으로 공급되는 경우에는 탄소 침적 현상이 일어나지 않고 메탄합성 반응이 안정적으로 유지되어 CO 전환율 99% 이상, CH₄ 선택도 97% 이상, CH₄ 생산성 최대 695 ml/h·-cat를 얻을 수 있었다. In this study, we analyzed the operational characteristics of a 0.25 MW methanation pilot plant. Isothermal reactor controled the heat released from methanation reaction by saturated water in shell side. Methanation process consisting of isothermal reactor and adiabatic reactor had advantages with no recycle compressor and more less reactors compared with methanation process with only adiabatic reactors. In case that H2/CO ratio of syngas was under 3, carbon deposition occurred on catalyst in tube side of isothermal reactor and the pressure of reactors increased. In case that H₂/CO ratio was maintained around 3, no carbon deposition on catalyst in tube side of isothermal reactor was found by monitoring the differential pressure of reactors and by measuring the differential pressure of several of tubes filled with catalyst before and after operating. It was shown that CO conversion and CH₄ selectivity were over 99, 97%, respectively, and the maximum CH₄ productivity was 695 ml/h·g-cat.
흡착제를 이용한 매립지가스 내 CO<sub>2</sub> 분리 특성
허려화 ( Ryehwa Heo ),유영돈 ( Youngdon Yoo ),김문현 ( Munhyun Kim ),김형택 ( Hyungtaek Kim ),최익환 ( Ikhwan Choi ) 한국신재생에너지학회 2009 신재생에너지 Vol.5 No.4
The purpose of this study is to investigate selective adsorption of CO<sub>2</sub> from LFG (Landfill gas) by using commercialized NaX-type zeolite adsorbent under the ambient temperature and pressure. The experiment of CO<sub>2</sub> adsorption was carried out by using simulated LFG. The CO<sub>2</sub> adsorption capacity and separation efficiency of NaX-type adsorbent were investigated by analyzing gas flow rate and gas composition at inlet and outlet of the adsorption reactor. The adsorbed CO<sub>2</sub> were desorbed under decompression condition which 0.5 Torr or by air purge. Through the result to use simulated LFG, when the method of VSA was used, 73.2~75.3 mg of CO<sub>2</sub> was adsorbed per 1 g commercial adsorbent, when the method of air purge was used, 78.4~83.2 mg of CO<sub>2</sub> was adsorbed per 1 g of commercial adsorbent.