http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김경수,김우철,김경옥,Kim, Kyung-Soo,Kim, Woo-Chul,Kim, Kyeong-Ok 대한한의학방제학회 2012 大韓韓醫學方劑學會誌 Vol.20 No.1
Objectives : This study was carried out to investigate trends of using Shihogayonggolmoryo-tang granule on neuropsychiatry fields. And suggest that using herbal extracts change non-prescription medicine to prescription medicine. Methods : I researched 86 outpatients who treated with Shihogayonggolmoryo-tang granule at oriental medicine hospital. And I analyzed their medical records of chart review study. Results : 1. Average medication time in this research was 14.9 days and the main usage was supplementary to herbal medicine, such cases amounted to 62%. 2. There are 52 patients out of 86 who are much better, such cases amounted to 55%. 3. The improved diagnosis is Syndrome of heart-fire flaring up, Syndrome of upper energizer dryness-heat, headache, and tinnitus. The improved symptom is anxiety, headache, dizziness, tic disorders, and chest discomfort. Conclusions : I expect to using herbal extracts change non-prescription medicine to prescription medicine based on this study.
김경수,김우택,박상수,장대홍 ( Kyung Soo Kim,Woo Tack Kim,Sang Soo Park,Dae Hong T . Jaang ) 한국경제학회 1998 經濟學硏究 Vol.46 No.4
계열기업집단의 상호주식보유(cross shareholding, interlocking shareholding)는 한국 대기업의 소유 및 지배구조에서 가장 두드러진 특성의 하나로 알려져 있다. 이 논문은 한국 대기업의 외형상 지분분포와 자본구조가 상호주식보유로 인해 심하게 왜곡되어 있으며, 이를 수정하는 방법으로 상호주식보유행렬을 이용한 실질자본과 순지분분포의 개념을 사용할 수 있음을 보여 주고 있다. 30대 재벌그룹에서 이러한 왜곡을 수정한 결과를 보면, 대주주의 실질 지분인 순지분은 외형상 직접지분의 약 1.8배이며, 외형상의 자기자본은 23% 과대평가되어 있고, 따라서 부채-자기자본비율은 외형상의 부채-자기자본비율은 130% 상향된 530% 수준으로 드러나고 있다. 이러한 지분과 자본구조의 왜곡은 소유경영자의 대리인문제를 심화시켜 자본구조와 배당성향의 결정과 같은 기업재무정책에 저다란 영향을 줄 수 있다. 부채비율과 배당성향에 대한 상호주식보유지분의 영향을 실증적으로 검증해 보면, 외형상의 부채비율이 아닌 수정된 자기자본을 사용할 경우에 자본구조의 이론적 해석이 훨씬 용이할 뿐만 아니라, 지배적 대주주와 상호주식보유의 지분이 대리인문제를 심화시킨다는 가설을 확인해 주고 있다.
『동의수세보원(東醫壽世保元)』과 『격치고(格致藁)』의 사상구조(四象構造)에 대(對)한 고찰(考察)
김경수,이수경,이의주,고병희,송일병,Kim, Kyung-Su,Lee, Soo-Kyung,Lee, Eui-Ju,Koh, Byung-Hee,Song, Il-Byung 사상체질의학회 2004 사상체질의학회지 Vol.16 No.2
1. Objectives This paper was tried to find out Dong-Mu's recognition systemfor Sasang Structure about "Dongyi Suse Bowon" and "Gyukchigo" 2. Methods The study was researched through comparative studying in a structural manner between "Gyukchigo" 's Affairs-Mind-Body-Objects(事心身物) and "Dongyi Suse Bowon" 's Heaven-Human-Nature-Order(天人性命). 3. Results and Conculusions "Gyukchigo" 's Affairs-Mind-Body-Objects(事心身物) should be understood as Dong-Mu's change process of thinking scheme before writing the book of "Dongyi Suse Bowon" and it is somewhat difficult to make a connected attachment in a lump between "Dongyi Suse Bowon" 's Heaven-Human-Nature-Order(天人性命) and "Gyukchigo" 's Affairs-Mind-Body-Objects(事心身物). Just "Dongyi Suse Bowon" 's Heaven-Human-Nature-Order(天人性命) can be understood as a new recognition systemto encompass" Gyukchigo" 's Affairs-Mind-Body-Objects(事心身物).
레일리분포를 이용한 유한고장과 무한고장 소프트웨어 신뢰성 모형에 대한 비교연구
김경수,김희철,Kim, Kyung-Soo,Kim, Hee-Cheul 한국디지털정책학회 2014 디지털융복합연구 Vol.12 No.12
소프트웨어 고장분석을 위한 비동질적인 포아송과정에서 결함당 고장발생률이 상수이거나, 단조 증가 또는 단조 감소하는 패턴을 가질 수 있다. 본 논문에서는 결함의 기대값을 가정하는 유한고장소프트웨어 NHPP모형과 수리시점에서도 고장이 발생할 상황을 반영하는 무한고장 NHPP모형들을 비교 제시하였다. 소프트웨어 신뢰성분야에서 많이 인용되는 레일리분포를 이용한 유한고장과 무한고장 소프트웨어 신뢰성모형에 대한 비교문제를 탐색한 결과 무한고장모형이 유한고장모형보다 효율적으로 나타났다. 이러한 비교문제를 위하여 모수추정은 최우추정법을 이용하였다. 이 연구를 통하여 소프트웨어 개발자에게 소프트웨어 고장현상을 파악하는데 어느 정도 도움을 줄 수 있을 것으로 사료 된다. The NHPP software reliability models for failure analysis can have, in the literature, exhibit either constant, monotonic increasing or monotonic decreasing failure occurrence rates per fault. In this paper, finite failure NHPP models that assuming the expected value of the defect and infinite failures NHPP models that repairing software failure point in time reflects the situation, were presented for comparing property. Commonly used in the field of software reliability based on Rayleigh distribution software reliability model finite failures and infinite failures were presented for comparison problem. As a result, infinite fault model is effectively finite fault models, respectively. The parameters estimation using maximum likelihood estimation was conducted. In this research, can be able to help software developers for considering software failure property some extent.
A Study on Design of the Image Retrieval System Using Embedded System
김경수,Kim, Kyung-Soo Korea convergence Security Association 2010 융합보안 논문지 Vol.16 No.7
최근, 멀티미디어는 인터넷의 확산과 하드웨어의 발전에 이르기까지 과거와 비교할 수 없을 만큼 형성, 제공, 그리고 공유되고 있다. 따라서 국제적으로 멀티미디어의 메타 데이터에 대한 적절한 표현을 제공하기 위해 MPEG-7의 표준이 설립되었다. 그리고 이미지 검색 중 MPEG-7을 사용한 멀티미디어의 다양한 데이터에 대한 연구가 진행되고 있다. 이미지 검색 시스템에는 meaning-based 검색과 content-based 검색이 있다. meaning-based 검색은 검색 속도가 빠른 것이 장점이지만, 이미지에 대한 기술적인 지식에 의해 기술과 정밀도가 영향을 받는다. content-based 검색은 이미지에 대한 의미와 사용자의 의도를 제대로 이해하지 못해 검색의 정확도가 감소하고 있다. 이 연구에서는 이러한 문제들을 해결하기 위해 두 가지 방법을 결합하여 검색 시스템을 설계하였다. 또한 시스템을 휴대용 장치 즉 휴대용 PDA 또는 스마트 폰으로 이미지 데이터를 검색하고 관리하기 위해 임베디드 시스템에 적용할 수 있도록 설계하였다. 이 시스템을 사용한다면, 휴대용 장치로 멀티미디어 데이터를 효율적으로 검색하고 활용할 수 있다. Recently multimedia has been formed, provided, and shared enough not to compare with the past, due to the proliferation of Internet and the development of hardware relating to multimedia. Accordingly to internationally give a proper expression to metadata of multimedia, the standard of MPEG-7 has been established, and researches for image search among various data of multimedia using MPEG-7 are going on. Thus there are meaning-based search. In the former there is a merit that search speed is fast, but technology and accuracy by technical knowledge on the image. In the latter the accuracy of search is decreasing because of not understanding the meaning about image and the internet of users. In this study to solve these problems a search system has been designed by combining the two methods. Also the search and manage image data by handheld devices such as portable PDA or smart phone, a system. Once this is used, multimedia data can be efficiently searched and utilized by handheld devices.
분할형 극세사를 이용한 습식인공피혁의 제조와 물리적 특성에 관한 연구
김경수,이명수,심현주,Kim Kyung Su,Lee Myong Soo,Shim Hyun Joo 한국섬유공학회 2005 한국섬유공학회지 Vol.42 No.1
An isotropic fiber web was manufactured with a sheet forming machine using split type micro-fibers. This fiber web was interlaced through a water jet process to bind the constituent fibers. The process variables that affect the physical properties of this nonwoven fabrics were controlled. The optimal processing conditions for the wet-laid, spun-laced suede were as follows: fiber length be 5 mm, type of dispersing agent be nonionic surfactant, and concentration of the dispersing agent be 0.3 g/l. The fiber damages, surface characteristics, and the mechanical properties measured by KES-F system were compared with exiting suede fabrics made by carding and needle punching. The results showed that the surface properties and the directional properties of these new type suedes are superior to those made by conventional methods.