http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
무선전력전송 전기충전설비용 전원공급장치의 최적운용방안에 관한 연구
유경상(Kyung-Sang Ryu),김병기(Byungki Kim),김대진(Dae-Jin Kim),장문석(Moon-Seok Jang),노대석(Daeseok Rho),고희상(Hee-Sang Ko) 한국산학기술학회 2017 한국산학기술학회논문지 Vol.18 No.9
본 논문에서는 전기자동차 배터리의 충전 방안 중 하나로 여겨지는 무선전력전송을 이용할 경우 발생 가능한 보호협조 문제점을 분석한다. 전기충전을 위한 무선전력전송 시스템을 구축하기 위해서는 전원공급장치 개발이 필수적이나, 전원공급장치의 정확한 설치기준이 없기 때문에 운용 시 보호협조 상에 문제점이 발생 할 수 있다. 따라서 본 논문에서는 PSCAD/EMTDC로 무선전력전송 전기충전설비용 전원공급장치를 모델링하여 가능성 있는 사고를 모의해보고, 이를 해결할 수 있는 대안을 제시하고자 한다. 즉, 사고 발생 시, 전원공급장치의 60Hz 대역에서 정격차단용량(12.5kA) 상회 가능성과 20kHz 대역에서의 임피던스 병렬화로 인한 보호기기의 부동작 가능성을 시뮬레이션을 통해 확인하였고, 이에 대한 해결책으로 대칭좌표법을 이용한 사고해석 알고리즘과 사고전류를 저감시킬 수 있는 NGR 산정 알고리즘을 제안하였다. 이를 통해 60Hz 대역에서는 NGR(Neutral Ground Resister)을 도입하여 사고전류를 정격차단용량 이하로 저감시키고, 20kHz 대역에서는 중선선에 CT 설치 및 이에 대한 보호정정을 통해 보호기기 부동작이 방지됨을 확인하였다. This paper deals with the power supply facility providing wireless power transmission for a type of electric vehicles called the on-line electric vehicle(OLEV) and proposes optimal protection coordination methods which analyze the faultsin the 60Hz and 20kHz bands using PSCAD/EMTDC, which is the typical commercial software for the distribution system. The simulation results show that the proposed methods can reduce the fault current by introducing an NGR (Neutral Ground Resistor) in the 60Hz band and prevent the malfunctioning of the protection device by installing a CT in the neutral wire in the 20kHz band when a ground fault occurs.
유경상(Kyung-Sang Ryu),김병기(Byungki Kim),김대진(Dae-Jin Kim),장문석(Moon-seok Jang),고희상(Hee-sang Ko),김호찬(Ho-Chan Kim) 한국산학기술학회 2017 한국산학기술학회논문지 Vol.18 No.10
본 논문에서는 전기자동차용 배터리의 충방전 상태를 정확하게 추정하고 안정적으로 평가하기 위하여, 비선형성을 가지는 배터리의 출력특성을 단계마다 선형화시켜 상태를 평가하고, 실시간 구현 및 모델의 오차보정과 노이즈에 강인한 특성을 가지고 있는 확장칼만필터 알고리즘을 이용한 SOC 추정 방법을 제안한다. 확장칼만필터를 적용하기 위해 배터리를 1차 Thevenin 모델로 나타내고, SOC 추정을 위한 배터리 성능평가 시뮬레이터를 구현하여, 실험을 통해 확장칼만필터에 적용될 파라미터를 도출한다. 본 논문에 적용된 SOC 상태추정 전략에서는 기존 선행 연구들과 다르게 배터리에 명시되어 있는 정격용량을 최대 충전가능용량으로 대체함으로써, 배터리의 노화에 상관없이 언제나 0%~100%의 SOC를 가질 수 있도록 변경된 수법을 제안한다. 이를 통해, 고정밀 CT를 사용한 Ah counting에 의한 SOC 추정을 기준으로 하여 본 논문에서는 배터리의 비선형 구간에서도 오차를 줄일 수 있는 확장칼만필터 방법을 제안하고 시뮬레이션을 통해 배터리 전 SOC 영역에서 추정오차를 5% 미만으로 줄일 수 있음을 확인한다. This paper reports a SOC(State-of-Charge) estimation method using the extended Kalman filter(EKF) algorithm, which can allow real-time implementation and reduce the error of the model and be robust against noise, to accurately estimate and evaluate the charging/discharging state of the EV(Electric Vehicle) battery. The battery was modeled as the first order Thevenin model for the EKF algorithm and the parameters werederived through experiments. This paper proposes the changed method, which can have the SOC to 0% ~ 100% regardless of the aging of the battery by replacing the rated capacity specified in the battery with the maximum chargeable capacity. In addition, This paper proposes the EKF algorithm to estimate the non-linearity interval of the battery and simulation result based on Ah-counting shows that the proposed algorithm reduces the estimation error to less than 5% in all intervals of the SOC.
강승진(Kang, Seung-Jin),고희상(Ko, Hee-Sang),부창진(Boo, Chang-Jin),김호찬(Kim, Ho-Chan) 한국산학기술학회 2014 한국산학기술학회논문지 Vol.15 No.12
본 논문에서는 독립된 풍력 복합발전 시스템을 대상으로 시스템의 모델링과 다양한 환경에서 체계적으로 동작시키기 위한 멀티에이전트 기반의 제어방법을 제안한다. 멀티에이전트 제어는 풍력발전기, 디젤발전기, 배터리, 부하로 구성되는 새 로운 형식의 하이브리드 제어방법이고, 풍속과 배터리의 충전상태에 따라 풍력 복합발전 시스템의 운전은 14개의 모드로 나누어 수행된다. 시뮬레이션 성능평가를 통해 제안된 알고리즘이 독립된 풍력 복합발전 시스템에서 다양한 풍속변화가 존 재하는 경우에도 효율적으로 운전될 수 있음을 보여준다. In this paper, the system modeling and multi-agent control algorithm in isolated wind hybrid power systems are proposed. The multi-agent control is a new type of the hybrid control method that is made up of wind turbine, diesel generator, battery, and dumpload. Fourteen different modes of operations of the wind hybrid power system are performed by wind speed changes and the SOC of battery. Simulation results show that the efficient operations under various wind variations in isolated wind hybrid power systems can be obtained using proposed algorithms.
김이석 ( Lee Seok Kim ),고희상 ( Hee Sang Ko ),한재호 ( Jae Ho Han ),김다인 ( Da In Kim ),신은정 ( Eun Jung Shin ),김문주 ( Moon-ju Kim ) 전북대학교 농업과학기술연구소 2019 농업생명과학연구 Vol.50 No.2
The purpose of this study was to compare the quality trait of breast meat of Korean native chickens and broiler in animal welfare farm. The pH value of breast meat of broiler was significantly higher than Korean native chickens (p< 0.05). The breast from broilers showed lower percentages of cooking loss than Korean native chickens but it did not differ significantly (p >0.05). The moisture content in broiler was significantly higher than Korean native chickens (p<0.05). The L* value of breast muscle from Korean native chickens was significantly higher (p<0.05) than broilers. The a* value of breast muscle from Korean native chickens was higher than from broilers but there was no statistical difference. The b* value of breast muscle from Korean native chickens was higher than from broilers but there was no statistical difference like a* value. As a result of comparing breast muscle from Korean native chickens and broilers by electrophoresis, the protein degradation patterns were slightly different.
선로전압조정장치(SVR)가 설치된 고압배전선로에서 전기저장장치(ESS)의 최적운용 및 적정용량 산정방안
김병기(Byungki Kim),유경상(Kyung-Sang Ryu),김대진(Dae-Jin Kim),장문석(Moon-seok Jang),고희상(Hee-sang Ko),노대석(Daeseok Rho) 한국산학기술학회 2018 한국산학기술학회논문지 Vol.19 No.6
최근 국가의 3020정책에 따라 신재생에너지전원의 도입이 활발히 이루어지고 있는 상황이다. 하지만 신재생에너지전원중의 하나인 태양광전원이 대규모로 배전계통에 도입되어 운용될 경우, 태양광전원의 간헐적 특성에 의한 출력변동과 역조류에 의하여 수용가 전압은 규정범위(220V±6%)를 벗어날 수 있는 문제점을 가지고 있다. 이를 해결하기 위한 방안 중 하나로, 배전선로에 기설된 선로전압조정장치를 이용한 수용가 전압조정 방안이 제안되고 있으나, 기계적으로 동작하는 선로전압조정장치의 특성으로 인하여, 탭 변경 시간동안 수용가의전압이 규정범위를 벗어날 가능성을 가지고 있다. 이에 본 논문에서는 선로전압조정장치 탭 변경시, 기계적인 특성에 의하여 탭 동작이 지연되는 시간동안 전기저장장치를 도입하여 전압문제를 해결할 수 있는 전기저장장치의 최적운용전략을 제시하고, 파라메타 분석법을 이용하여 선로전압조정장치와 협조하여 운용되는 전기저장장치의 적정위치 및 적정용량 산정방안을 제안하였다. 본 논문에서 제안한 선로전압장치와 전기저장장치의 상호동작에 대한 최적운용 전략과 전기저장장치의 산정 알고리즘을 바탕으로 시뮬레이션을 수행한 결과, 선로전압조정장치의 탭 변경 시간동안 수용가의 규정전압(220V±6%) 여부를 검증함으로써, 본 논문에서 제안한 수법이 계통의 전압안정화에 기여할 수 있는 방안임을 확인하였다. When a large-scale photovoltaic (PV) system is introduced into a distribution system, the customer`s voltage may exceed the allowable limit (220V±6%) due to voltage variations and reverse power flow in the PV system. In order to solve this problem, we propose a method for adjusting the customer voltage using the existing step voltage regulator (SVR) installed in the primary feeder. However, due to the characteristics of a mechanically operating SVR, the customer voltage during the tap changing time of the SVR is likely to deviate from the allowable limit. In this paper, an energy storage system (ESS) with optimal operation strategies, and an appropriate capacity calculation algorithm are proposed, and the parallel driving scheme between the SVR and the ESS is also proposed to solve the customer voltage problem that may occur during the tap changing time of the SVR. The simulation results show that the allowable limit of the customer voltage is verified by the proposed methods during the tap changing time of the SVR when the large-scale PV system is connected to the distribution system.
PV PHIL-시뮬레이터의 성능 개선을 위한 최적의 운영제어 알고리즘 연구
김대진(Dae-Jin Kim),김병기(Byungki Kim),고희상(Hee-Sang Ko),장문석(Moon-Seok Jang),유경상(Kyung-Sang Ryu) 한국산학기술학회 2017 한국산학기술학회논문지 Vol.18 No.9
기존 RTDS를 이용한 PV PHIL(Power-Hardware-In-Loop) Simulator는 확장성과 유연성의 문제로 인하여 일반 DC Amplifier를 이용한 많은 연구가 진행되었으나, PV Inverter와 연계할 경우에 과도 상태의 출력이 발생하여 안정성과 PV Inverter의 성능 개선이 불가능하였다. 따라서, 이러한 문제점을 해결하기 위하여 본 논문에서는 PV PHILS의 출력 성능 향상과 안정적인 운영이 이루어질 수 있는 제어 알고리즘을 제안한다. 즉, 이 제어 알고리즘은 DC Amplifier의 전기적 출력 특성을 극복하기 위해 정전압(CV), 정전류(CC) 상태에 따라 전압, 전류의 목표 값을 제어하고 각 장치별 특성 고려한 Multi-rate 기반의 특성을 갖는다. 먼저, PV Array의 수학적인 모델링과 DC Amplifier 그리고 DC 전력측정용 Isolated 장치와 통합하여 실시간 처리 기반의 장치로 구성하였고, 제안한 알고리즘이 적용된 PV PHILS와 실제 계통에 연계된 PV Inverter를 이용한 성능시험을 통해서, 그 결과가 기존 방법에 대비해 우수성 및 유용성을 입증하였다. This paper proposes an operational algorithm for a Photovoltaic Power-Hardware-In-Loop Simulator that is designed to improve the control algorithm and reliability of the PV Inverter. There was an instability problem in the PV PHILS with the conventional algorithm when it was connected tothe PV inverter. Initially, a real-time based computing unit with mathematical modeling of the PV array is implemented and a DC amplifier and an isolated device for DC power measurement are integrated. Several experiments were performed based on theabove concept undercertain conditions, which showed that the proposed algorithm is more effective for the PV characteristic test and grid evaluation test than the conventional method.