http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
고영준,강병용,장호경,김예현,Go, Young-Jun,Kang, Byoung-Yong,Chang, Ho-Gyeong,Kim, Ye-Hyun 한국음향학회 1996 韓國音響學會誌 Vol.15 No.2
비선형 건마찰 감쇠를 가진 외팔보의 강제진동 응답을 건마찰 감쇠기와 가진력의 위치변화에 대하여 미끄러진 변위와 힘레벨을 수치해석하였다. 구성모드의 분석은 비선형 감쇠를 가진 계를 해석하기 위해 구속조건과 Lagrange 승수에 기초를 두고 분석하였다. 외팔보의 진동분석 결과 건마찰 감쇠기가 부착된 단순 지지된 보(beam)에서 보여진 응답특성과 유사한 특성이 나타났다. A theoretical study of the forced vibration response of a cantilevered beam with non-linear dry friction damping is analyzed by various slip displacements and force levels for the position coordinates of spring-mass-damper and external exciting force. A component mode analysis is carried out based on the constraint conditions and Lagrange multipliers to treat physical systems with non-linear damping. The analysis has shown that the basic phenomena observed for a simply supported beam with a dry friction damper attached are also observed for cantilevered beam.
김영담,고영준,남효덕,이두희,장호경,Kim, Young-Dam,Go, Young-Jun,Nam, Hyo-Duk,Lee, Doo-Hee,Chang, Ho-Gyeong 한국음향학회 2001 韓國音響學會誌 Vol.20 No.5
힘평형 서보 가속도계의 성능특성을 결정하는 4개의 팔로 구성된 질량지지 장치를 설계·제작하였다. 팔의 두께와 인가질량의 변화에 따른 질량지지 장치의 응답특성을 유한 요소법을 이용하여 계산하고, 레이저 간섭계를 이용하여 간섭무의 수의 변화와 응답 전압값을 이용하여 가속도계의 응답특성을 측정하였다 팔의 길이와 두께가 변화함에 따라 응답특성은 크게 변화하였으며, 인가질량의 변화는 질량지지 장치의 응답특성변화에 큰 영향을 미치지 못함을 알 수 있었다. 수치해석과 레이저 간섭계로 측정한 공진주파수가 5%차이의 근사한 값을 얻을 수 있었다. The mass-spring system with four arms for the force-balance servo accelerometer was designed and fabricated. The response characteristics of a mass-spring system was calculated with the change of arms thickness and seismic mass by the finite element method (FEM). Furthermore, the response characteristics of accelerometer was measured using the change of interference pattern and response voltage value by Michelson interferometer. The response characteristics with changing length and thickness of arm was changed drastically, and changing seismic mass was minor effect for the response characteristics of mass-spring system. The measured resonant frequencies have good agreement with that of numerical analysis within 5% range.
김예현,고영준,강병용,장호경,Kim, Ye-Hyun,Go, Young-Jun,Kang, Byoung-Yong,Chang, Ho-Gyeong 한국음향학회 1997 韓國音響學會誌 Vol.16 No.1
강제진동에 의한 외팔보의 동적응답과 진동모드를 연구하였다. Bernoulli-Euler 이론과 유한요소법을 이용하여 외팔보의 고유진동수와 진동모드를 수치해석하고 실험으로 측정하여 비교하였다. 가진주파수를 1Hz에서 70Hz까지 변화시켜 외팔보의 1차, 2차 공진주파수를 구하고, 응답위치에 따른 진동 변위를 측정하여 진동모드를 살펴보았다. 실험결과에서 외팔보의 절점(node)이 1차모드에서는 0.2차모드에서는 0,0.786으로 측정되었다. 외팔보의 공진주파수와 진동모드에 대해 이론적으로 예상했던 결과와 실험으로 측정한 결과가 거의 일치하였다. As analysis of the forced dynamic response and vibrational mode for the cantilevered beam is described. Experimental results are compared with the natural frequencies and vibrational modes for the cantilevered beam using the theory of Bernoulli-Euler and finite element method. We have found 1st and 2nd resonance frequency of the cantilevered beam by means of the various external frequencies, $1{\sim}70Hz$, using magnetic transducer. And we have studied the vibrational displacement at obtained resonance frequency of the cantilevered beam. The experimental results for the nodes of cantilevered beam were 0 in 1st mode and 0,0.786 in 2nd mode. close agreement between the theoretically predicted results and experimental result was obtained for the vibrational mode.
구모세 ( Mo-se Koo ),고영준 ( Young-jun Go ),김규태 ( Kyu-tae Kim ),박명숙 ( Myeong-suk Park ),김상훈 ( Sang-hoon Kim ) 한국정보처리학회 2021 한국정보처리학회 학술대회논문집 Vol.28 No.2
본 논문에서는 서비스용 다관절 로봇팔의 주요기능인 다양한 컵의 검출과 조작, 이동등을 지능적으로 구현하기 위해 로봇 오픈소스 운영체제인 ROS(Robot Operation System)을 기반으로 관련 프로그램을 개발하고 기능을 구현하였다. 연구의 주요 목표인 다양한 종류의 컵, 병과 같은 물체를 실수 없이 집어서 옮기기 위한 처리과정으로 관심물체인식, 3D좌표생성, 결과데이터의 역 기구학 해석등을 수행하였으며, 이를 통해 각 기구부의 축들이 물체에 정확히 도달하고 동작의 오류를 최소화하기 위해 ROS기반의 6축 서비스 로봇팔을 활용한 경로 생성과정과 물체의 검출 성능 과정 및 실험등을 제시하였다.
풍력터빈 후류 유동특성 측정 데이터를 이용한 Eddy Viscosity 및 Lange 후류모델의 예측 정확도 검증
전상현(Sang Hyeon Jeon),고영준(Young Jun Go),김범석(Bum Suk Kim),허종철(Jong Chul Huh) 대한기계학회 2016 大韓機械學會論文集B Vol.40 No.1
상업용 풍력발전단지에 설치된 기상 탑의 측정데이터와 풍력터빈의 SCADA(Supervisory Control and data Acquisition) 데이터를 이용하여 풍력터빈의 후류영향을 분석하고 후류 풍속저감 예측을 위한 eddy viscosity 모델 및 난류강도 예측을 위한 Lange 모델의 계산값과 비교하였다. 후류영향 분석결과, 자유단(free stream) 풍속이 낮을수록 풍력터빈 후류에서의 풍속 감소율은 증가하였으며 후류 난류강도 역시 자유단 풍속이 낮아질수록 증가하는 특징을 보였다. Eddy viscosity 모델에 의해 예측된 풍력터빈 후류중심에서의 풍속 감소율은 측정값에 비해 과대 예측되었으며 Lange 모델에 의한 후류 난류강도 예측은 실측값과 유사하게 예측되고 있음을 보였다. The wake effects behind wind turbines were investigated by using data from a Met Mast tower and the SCADA (Supervisory Control and Data Acquisition) system for a wind turbine. The results of the wake investigations and predicted values for the velocity deficit based on the eddy viscosity model were compared with the turbulence intensity from the Lange model. As a result, the velocity deficit and turbulence intensity of the wake increased as the free stream wind speed decreased. In addition, the magnitude of the velocity deficit for the center of the wake using the eddy viscosity model was overestimated while the turbulence intensity from the Lange model showed similarities with measured values.
친환경 셀룰로오스 아세테이트 판재의 안경테 가공 공정별 물성 특성 연구
박대진(Dae Jin Park),이세근(Se Guen Lee),이해성(Hae Sung Lee),이성준(Sung Jun Lee),정상원(Sang Won Jung),김현철(Hyun-chul Kim),고영준(Young Jun Go) 한국안광학회 2015 한국안광학회지 Vol.20 No.1
Purpose:For optimizing properties of final glasses frame, the aim of this study is to examine the correlation of processing conditions and properties of cellulose acetate (CA) sheets through the investigation of properties of CA sheets prepared under processing steps. Methods: The properties of CA sheets were investigated in terms of different glasses frame processing conditions, bending process, barrel process, and ultrasonic cleaning process. CA sheets prepared through the sequential processing were examined by various analysis: gloss, mechanical properties, thermal properties. Results: After barrel process, hardness and tensile strength of CA sheet were increased. However, bending strength and impact strength were decreased. It is suggested the CA sheet had became rather stiff state (brittle). Also, in degradation temperature region of plasticizer, about 3% of reduction in plasticizer weight was confirmed upon TGA analysis. Conclusions: Glasses frame process, especially in the barrel process have a profound influence on the properties of CA sheet owing to reduction of total amount of plasticizer.
다공성 코디어라이트의 원적외선 방사특성에 영향을 미치는 금속산화물 첨가효과
이상욱,고영준,박재성,남효덕 嶺南大學校 工業技術硏究所 2002 工業技術硏究所論文集 Vol.30 No.2
Effects of adding metal oxides upon characteristics of infrared radiator of porous cordierite have been investigated. Three kinds of metal oxides, CoO, CuO and MnO_2, were added to cordierite and the amount of metal oxides was varied from 3 to 9 wt%. The porosity and the emissivity were decreased by increasing amount of CuO additive. While the porosity and the emissivity were increased by increasing amounts of CoO, MnO_2 additives. Since the rough surface and porous cordierite has higher emissivity than smooth and dense cordierite, the experimental results of the effect of metal oxides addition was explained on the basis of porosity. The emissivity was proportional to the porosity of the sintered body, which was influenced by the types and the amount of metal oxides.
유한요소법과 경계요소법을 이용한 음향트랜스듀서의 음향방사 특성 해석
남효덕,서희돈,고영준,장호경 嶺南大學校 工業技術硏究所 2001 工業技術硏究所論文集 Vol.29 No.2
The acoustic characteristics of the acoustic transducer was simulated by using the finite element method(FEM) and boundary element method(BEM). After meshing the inside closed boundary of the acoustic transducer, pressure gradients, isobaric lines, directivity characteristics and acoustic impedances were calculated by using the FEM and characteristics of 3-D free field sound pressure, directivity characteristics and radiation efficiency were simulated by using the BEM. It was shown that the usefulness of the design and the fabrication for the acoustic transducer from the results.