http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Glottal flow 신호에서의 향상된 특징추출 및 다중 특징파라미터 결합을 통한 화자인식 성능 향상
강지훈,김영일,정상배,Kang, Jihoon,Kim, Youngil,Jeong, Sangbae 한국정보통신학회 2015 한국정보통신학회논문지 Vol.19 No.12
본 논문에서는 화자 인식의 성능을 개선하기 위해서 glottal flow로부터 source mel-frequency cepstral coefficient (SMFCC), 왜도, 첨도를 추출하여 활용하였다. 일반적으로 glottal flow의 고주파 대역은 응답의 크기가 평탄하므로 미리 정한 차단주파수 미만에 대해서만 SMFCC를 추출한다. 추출된 SMFCC, 왜도, 첨도는 종래의 특징 파라미터와 결합된 후 종래의 화자인식 시스템과 동등한 조건에서의 성능 비교를 위하여 principal component analysis (PCA) 및 linear discriminiat analysis (LDA)를 통한 차원축소가 행해진다. 대용량의 화자인식 실험결과를 통해서 제안된 인식 시스템이 종래의 화자인식 시스템 보다 더 좋은 성능을 나타냄을 확인할 수 있었으며, 특히 가우시안 혼합이 낮을 때 더 높은 성능향상을 나타내었다. In this paper, we utilize source mel-frequency cepstral coefficients (SMFCCs), skewness, and kurtosis extracted in glottal flow signals to improve speaker recognition performance. Generally, because the high band magnitude response of glottal flow signals is somewhat flat, the SMFCCs are extracted using the response below the predefined cutoff frequency. The extracted SMFCC, skewness, and kurtosis are concatenated with conventional feature parameters. Then, dimensional reduction by the principal component analysis (PCA) and the linear discriminat analysis (LDA) is followed to compare performances with conventional systems under equivalent conditions. The proposed recognition system outperformed the conventional system for large scale speaker recognition experiments. Especially, the performance improvement was more noticeable for small Gaussan mixtures.
GPU를 공유하는 컨테이너 환경에서 GPU 작업의 동시 실행을 위한 GPU 자원 경쟁 관리기법
강지훈,Kang, Jihun 한국정보처리학회 2022 정보처리학회논문지. 컴퓨터 및 통신시스템 Vol.11 No.10
컨테이너 기반 클라우드 환경은 다수의 컨테이너가 GPU(Graphic Processing Unit)를 공유할 수 있으며, GPU 공유는 GPU 자원의 유휴 시간을 최소화하고 자원 사용률을 향상할 수 있다. 하지만, GPU는 전통적으로 클라우드 환경에서 CPU, 메모리와는 다르게 컴퓨팅 자원을 논리적으로 다중화하고 사용자에게 자원 일부를 격리된 형태로 제공할 수 없다. 또한, 컨테이너는 GPU 작업을 실행할 때만 GPU 자원을 점유하며, 각 컨테이너의 GPU 작업 실행 시점이나 작업 규모를 미리 알 수 없기 때문에 자원 사용량 또한 미리 알 수 없다. 컨테이너가 GPU 자원을 임의의 시점에 제한없이 사용한다는 특징은 다수의 컨테이너가 GPU 작업을 동시에 실행하는 환경에서 자원 경쟁 상태 관리를 매우 어렵게 만들며, GPU 작업은 대부분 GPU 내부에서 블랙박스 형태로 처리되기 때문에 GPU 작업이 실행된 이후에는 GPU 자원 경쟁을 방지하는데 제한적이다. 본 논문에서는 다수의 컨테이너가 GPU 작업을 동시에 실행할 때 자원 경쟁으로 인해 발생하는 성능 저하를 방지하기 위한 컨테이너 관리기법을 제안한다. 또한, 본 논문에서는 실험을 통해 다수의 컨테이너가 GPU 작업을 동시에 실행할 때 자원 경쟁으로 인한 성능 저하 문제를 분석하고 제안하는 컨테이너 관리기법의 효율성을 증명한다. In a container-based cloud environment, multiple containers can share a graphical processing unit (GPU), and GPU sharing can minimize idle time of GPU resources and improve resource utilization. However, in a cloud environment, GPUs, unlike CPU or memory, cannot logically multiplex computing resources to provide users with some of the resources in an isolated form. In addition, containers occupy GPU resources only when performing GPU operations, and resource usage is also unknown because the timing or size of each container's GPU operations is not known in advance. Containers unrestricted use of GPU resources at any given point in time makes managing resource contention very difficult owing to where multiple containers run GPU tasks simultaneously, and GPU tasks are handled in black box form inside the GPU. In this paper, we propose a container management technique to prevent performance degradation caused by resource competition when multiple containers execute GPU tasks simultaneously. Also, this paper demonstrates the efficiency of container management techniques that analyze and propose the problem of degradation due to resource competition when multiple containers execute GPU tasks simultaneously through experiments.
강지훈,조영환,박천수,Kang, Ji-Hoon,Cho, Young-Hwan,Park, Cheon-Shu 한국정보교육학회 2001 정보교육학회논문지 Vol.4 No.2
Hypermedia documents include structural information for their documents There have been researches on storing and searching hypermedia documents using the structural information of the documents. For the purpose of presenting hypermedia documents, however, only a few models have been proposed. In this paper, we propose a new object-oriented model based on the structural information of HyTime documents for storing and also presenting efficiently the documents. For this modeling, we consider an application of HyTime, a system for a news-on-demand service that provides news customized by user requests. Our modeling can be applied to several Hypermedia application areas, like as customized web-based instructions and digital libraries as well as news-on-demand services.
산청 회장암과 철-티탄 광체의 구조적 특징과 발생적 관계
강지훈,이덕선,Kang, Ji-Hoon,Lee, Deok-Seon 대한자원환경지질학회 2014 자원환경지질 Vol.47 No.6
영남육괴 지리산지구의 산청지역은 선캠브리아기 지리산 변성암복합체와 이를 관입하는 산청 회장암복합체(이하, 회장암체) 그리고 이들을 관입하는 중생대 화성암류 등으로 구성되어 있고, 연구지역은 암주상 산청 회장암체의 서부에 위치한다. 본 연구는 산청 회장암체에 산출하는 산청 회장암(이하, SA)과 철-티탄 광체(이하, FTO)를 중심으로 노두별 상세한 야외지질조사를 수행하였으며, SA와 FTO의 엽리, 전단대, 산상 등으로부터 FTO 엽리의 성인과 이들 사이의 발생적 관계를 새롭게 해석하였다. 지금까지 밝혀진 SA와 FTO 사이의 구조적 특징은 다음과 같다: FTO의 다중 층상구조, SA의 세립화와 관련된 직선상, 혈관상, 요철상, 직각형 블록구조의 파생세맥, 점이적이고 불규칙한 SA 블록과 FTO 사이의 설상 또는 둥근 열편상 잠입 경계면 구조, 연성전단변형이 아닌 유동적 산상의 FTO 엽리와 FTO 엽리면상의 선상배열, SA 내에 발달하는 불연속전단대, SA 블록의 경계면에 평행한 FTO 엽리의 방향성, SA 블록의 경계면을 향한 FTO 엽리의 우세한 발달, 사장석 포획결정과 포획된 SA 블록의 종횡비에 비례하는 FTO 엽리의 우세성, FTO 엽리의 유동 습곡구조. 이러한 구조적 특징으로부터 FTO가 용융체로 존재할 당시에 SA가 완전히 고화되지 않았으며, 부분 고화된 SA의 단열작용은 FTO의 파생세맥과 SA의 세립화를 초래하였음을 알 수 있다. 또한 SA 블록과 FTO 사이에 점이적이고 불규칙한 경계면은 완전히 응결되지 않은 SA 블록와 FTO 용융체 사이의 상호반응에 의해 형성되었으며, FTO 엽리는 마그마 엽리로서 FTO 용융체와 부분 고결된 SA 블록 사이에 상호운동의 결과로 형성되었음을 알 수 있다. 이는 SA와 FTO는 성인과 시대를 달리하는 서로 다른 마그마의 관입관계가 아니라 동일시대의 동일기원 마그마의 다단계 분별정출작용에 의해 형성되었음을 의미하고, FTO는 관입적인 (암)맥상과 같이 규칙적인 산상이 아니라 불규칙한 단열을 따라 주입된 매우 불규칙한 산상을 보인 것으로 해석되며, Fe-Ti 광물자원 탐사 시에 적용될 수 있을 것이다. It consists of the Precambrian Jirisan metamorphic complex and Sancheong anorthosite complex and the Mesozoic granitoids which intrude them in the Sancheong area, the Jirisan province of Yeongnam massif, Korea. The study area is located in the western part of the stock-type Sancheong anorthosite complex. We performed a detailed fieldwork on the Sancheong anorthosite (SA) and Fe-Ti ore body (FTO) which constitute the Sancheong anorthosite complex, and reinterpreted the origin of FTO foliation and the genetic relationship between them from the foliations, shear zones, occurrences of the SA and FTO. The new structural characteristics between them are as follows: the multilayer structures of FTO, the derived veins of straight, anastomosing uneven types and block structures related to the size reduction of SA, the gradual or irregular boundaries of SA blocks and FTO showing bulbous lobate margins and comb structures, the FTO foliation and linear arrangements of flow occurrence which is not ductile shear deformation, the discontinuous shear zone of SA, the orientation of FTO foliations parallel to the boundaries of SA blocks, the predominance of FTO foliations toward the boundaries of SA blocks and being proportional to the aspect ratio of plagioclase xenocrysts and SA xenoblocks, and the flow folding structures of FTO foliation. Such field evidences indicate that the SA is not fully congealed when the FTO is melt and the fracturing of partly congealed SA causes the derived veins of FTO and the size reduction of SA. Also the gradual or irregular boundaries of SA blocks and FTO result from the mutual reaction between the not fully congealed SA blocks and the FTO melt, and the FTO foliation is a magmatic foliation which was formed by the interaction between the FTO melt and the partly congealed SA blocks. Therefore, these suggest that the SA and FTO are not formed from the intrusion of different magmas in genesis and age but from a coeval and cogenetic magma through multiple fractionation. We predict that the FTO will show an very irregular occurrence injected along irregular fractures, not the regular occurrence like as the intrusive vein and dike. It can be applied to the designing of Fe-Ti mineral resource exploration in this area.
강지훈,문상호,Kang, Ji-Hoon,Moon, Sang-Ho 한국정보통신학회 2014 한국정보통신학회논문지 Vol.18 No.6
지속적인 정보기술의 발전으로 최근 인문학, 지역학 등 다른 학문 분야와의 융합에 대한 필요성이 대두되고 있다. 정보기술과 인문 지역학의 융합 분야 중에서 전자문화지도는 점, 선, 면의 공간데이타와 시간, 공간, 주제를 통하여 다양한 문화정보를 디지털화하여 전자지도 위에 표현한다. 지식지도는 전자문화지도의 활용을 고도화시킨 개념으로, 기존의 전자문화지도 상에 전문학술정보를 표현하는 것이다. 이 지식지도는 세부적으로 전자문화지도와 연계하여 학술정보를 제공하므로 주제별, 지역별, 시대별 데이터가 유기적으로 연결된 시각적이고 통합적인 정보 공유 및 확산이 가능하다. 따라서 지식지도 구축이 활성화되면 효율적인 학문 연구 및 연구결과 확산을 위한 도구로 활용될 수 있다. 본 논문에서는 먼저 지식지도에 대한 전반적인 개념, 구성에 대한 연구 내용을 기술하고, 이를 기반으로 실제 지식지도 구현을 위한 설계를 제시한다. According to continuous development of information technology, it is needed to make convergence of other disciplines such as humanities and area studies. Among convergence fields related to information technology and humanities/area studies, electronic cultural atlas represents various digitalized cultural information on electronic map using spatial data such as points, lines, and polygons through time, spatial, and subject axises. Knowledge map is to represent special academic information based on electronic cultural atlas. In details, knowledge map can provide integrated information sharing and spread because academic information associated with electronic cultural atlas and data related to per subjects, regions, and period become organically connected. Therefore, knowledge map may be utilized to promote scholastic research and diffuse research result. In this paper, we describe basic concept and composition of knowledge map and propose design method to construct knowledge map.
브이월드 데스크톱을 위한 대용량 공간정보 데이터 지원 방안 연구
강지훈,김현덕,김정옥,Kang, Ji-Hun,Kim, Hyeon-Deok,Kim, Jung-Ok 한국국토정보공사 공간정보연구원 2015 지적과 국토정보 Vol.45 No.1
최근 IT기술의 발달로 데이터의 양이 급증함에 따라 대용량 데이터를 다루는 빅 데이터 시대가 도래하게 되었다. 다양하고 방대한 빅데이터 를 활용하기 위해서는 대용량 데이터 처리 기술을 필요로 하는데, 이러한 흐름에 따라 공간정보 분야에서도 대용량의 공간정보 데이터 서비스 기술이 요구되고 있다. 따라서 본 연구에서는 국외의 대표적인 공간정보 데이터 서비스 기술을 살펴본 후, 국내의 대표적인 지도 소프트웨어인 브이월드 데스크톱에 적용 가능한 KML 포맷의 대용량 데이터 처리 기술을 개발하였다. 개발된 분할 방법과 도구를 검증하기 위해 대용량의 KML 데이터를 이용하여 테스트를 진행하였고, 인덱스 파일과 분할 파일들이 생성되어 브이월드 데스크톱에서 가시화 되었다. Recently, as the amount of data increases rapidly, the development of IT technology entered the 'Big Data' era, dealing with large-volume of data at once. In the spatial field, a spatial data service technology is required to use that various and big amount of data. In this study, firstly, we explained the technology of typical spatial information data services abroad, and then we have developed large KML data processing techniques those can be applied as KML format to VWorld desktop. The test was conducted using a large KML data in order to verify the development KML partitioned methods and tools. As a result, the index file and the divided files are produced and it was visible in VWorld desktop.
유/무성음 구분 및 이종적 특징 파라미터 결합을 이용한 화자인식 성능 개선
강지훈,정상배,Kang, Jihoon,Jeong, Sangbae 한국정보통신학회 2014 한국정보통신학회논문지 Vol.18 No.6
In this paper, separate probabilistic distribution models for voiced and unvoiced speech are estimated and utilized to improve speaker recognition performance. Also, in addition to the conventional mel-frequency cepstral coefficient, skewness, kurtosis, and harmonic-to-noise ratio are extracted and used for voiced speech intervals. Two kinds of scores for voiced and unvoiced speech are linearly fused with the optimal weight found by exhaustive search. The performance of the proposed speaker recognizer is compared with that of the conventional recognizer which uses mel-frequency cepstral coefficient and a unified probabilistic distribution function based on the Gassian mixture model. Experimental results show that the lower the number of Gaussian mixture, the greater the performance improvement by the proposed algorithm. 본 논문에서는 화자 인식의 성능을 개선하기 위해서 유성음 및 무성음에 대한 별도의 확률분포 모델링을 사용하였다. 또한, 종래의 멜-주파수 캡스트럼 계수 이외에 유성음 구간에서 추가적으로 왜도, 첨도, 하모닉 대 잡음비 등을 추출하여 활용하였다. 화자 인식을 위한 스코어는 유성음 및 무성음 확률분포 모델에서 각각 구해지는데 전수 조사방식에 의해서 최적의 스코어 결합 가중치가 결정되었다. 제안된 방식의 화자인식기의 성능은 종래의 멜-주파수 캡스트럼 계수 및 화자당 하나의 혼합 가우시안 기반 확률분포 모델링을 사용한 방식과 비교되었으며 실험 결과 제안된 방식이 가우시안 혼합의 수가 낮아질수록 더 큰 성능 향상을 얻음을 알 수 있었다.
나노임프린트 리소그래피에서의 폴리머 레지스트의 변형에 관한 분자 동역학 시뮬레이션
강지훈(Ji-Hoon Kang),김광섭(Kwang-Seop Kim),김경웅(Kyung-Woong Kim) 대한기계학회 2004 대한기계학회 춘추학술대회 Vol.2004 No.11
Molecular dynamics simulations of nanoimprint lithography in which a stamp with patterns is pressed onto amorphous poly-(methylmethacrylate) (PMMA) surface are performed to study the deformation of polymer. Force fields including bond, angle, torsion, inversion, van der Waals and electrostatic potential are used to describe the intermolecular and intramolecular force of PMMA molecules and stamp. Periodic boundary condition is used in horizontal direction and Nose-Hoover thermostat is used to control the system temperature. As the simulation results, the adhesion forces between stamp and polymer are calculated and the mechanism of deformation are investigated. The effects of the adhesion force and friction force on the polymer deformation are also studied to analyze the pattern transfer in nanoimprint lithography. The mechanism of polymer deformation is investigated by means of inspecting the indentation process, molecular configurational properties, and molecular configurational energies.
모터 운전 주파수에 동기화된 차단주파수를 갖는 HPF(High pass filter)를 적용한 영구자석 동기전동기의 자속기반 센서리스 제어의 추정 자속 DC offset 제거 기법
강지훈(Ji-Hun Kang),조관열(Kwan-Yuhl Cho),김학원(Hag-Wone Kim) 한국산학기술학회 2019 한국산학기술학회논문지 Vol.20 No.3
영구자석동기전동기의 쇄교자속 기반 센서리스 제어는 저속에서 위치추정 특성이 우수 하지만 계측된 전류가 ADC를 통해 변환되는 과정에서 발생한 DC offset에 의하여 쇄교자속 추정기의 적분기가 포화되는 문제점을 가지고 있습니다. 이러한 현상을 방지하기 위해 낮은 차단주파수를 갖는 HPF를 사용하여 DC offset 성분을 제거하는 방법이 사용되나, HPF의 낮은 차단주파수로 인해 고속에서 추정 성능이 저하되는 문제점이 있다. 반면 HPF의 차단 주파수를 높이게 되면, 저속에서 위상 앞섬 및 초기기동 실패의 문제가 발생한다. 본 논문에서는 HPF의 차단주파수를 영구자석동기전동기의 운전주파수에 동기화함으로써 낮은 속도에서는 HPF의 차단주파수를 낮게 하여 HPF에 의한 위상 앞섬을 줄이고, 높은 속도에서는 HPF의 차단주파수를 높게 함으로써 높은 DC offset 제거 성능을 통해 운전영역을 200% 확대한다. 또한, 추가적인 위상 보상 알고리즘을 통해 전 운전영역에서 HPF의 위상 앞섬이 1.5도 미만으로 감소되는 방법을 제안한다. 제안된 센서리스 제어 알고리즘은 세탁기용 영구자석동기전동기를 이용한 실험을 통해 검증한다. The sensorless control based on the flux linkage of PM synchronous motors has excellent position estimation characteristics at low speeds. However, a limitation arises because the integrator of flux estimator is saturated by the DC offset generated during the analog to digital conversion(ADC) process of the measured current. In order to overcome this limitation, HPF with a low cutoff frequency is used. However, the estimation performance is deteriorated (Ed- the verb deteriorate already includes the meaning of "problem") at high speed due to the low cutoff frequency, and increasing the cutoff frequency of the HPF induces further problems of phase leading and initial starting failure at low speeds. In this paper, the cutoff frequency of HPF was synchronized to the operation frequency of the motor: at low speeds the cutoff frequency was set to low in order to reduce the phase leading of the estimated flux, and at high speeds it was set to high to raise the DC offset removal performance. As a result, the operating range was increased by 200%. Furthermore, a phase compensation algorithm is proposed to reduce the phase leading of the HPF to less than 1.5 degrees over the full operating range. The proposed sensorless control algorithm was verified by experiment with a PM synchronous motor for a washing machine.