http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
200 ㎸ 용량형 분압기 2대를 이용한 교류 고전압 측정범위 확장
鄭在甲(Jae-Kap Jung),李相和(Sang-Hwa Lee),姜銓洪(Jeon-Hong Kang),金明壽(Myung-Soo Kim),金潤亨(Yoon-Hyoung Kim),韓相吉(Sang-Gil Han),鄭辰慧(Jin-Hye Jeong),韓相玉(Sang-Ok Han),鄭鍾萬(Jong-Man Joung) 대한전기학회 2008 전기학회논문지 P Vol.57 No.1
The output voltage value of AC high voltage source has been usually obtained by multiplying low voltage value measured at both terminals of low voltage resistor by the dividing ratio of the high voltage capacitive divider. From the dividing ratio determined of each 200 ㎸ capacitive divider, we have developed step-up method for measuring the output voltage up to 400 ㎸ using two same type of 200 ㎸ capacitive dividers connected in series. The theoretical dividing ratio of 400 ㎸ capacitive dividers connected in series coincides with that of manufacturer's certification within measurement uncertainty. Thus, this developed step-up method makes it possible to extend the range of output voltage from 200 ㎸ to 400 ㎸, Furthermore. The dividing ratio of divider under test obtained using this step-up method is consistent with that obtained using one 200 ㎸ high voltage divider within corresponding uncertainties.
Binary Step-up 방법을 이용한 100 ㎸ 직류 고전압 분압기의 평가
이상화(Sang-Hwa Lee),유광민(Kwang Min Yu),강전홍(Jeong Hong Kang),장석명(Seok-Myeong Jang) 대한전기학회 2009 정보 및 제어 심포지엄 논문집 Vol.2009 No.10
Binary step-up방법을 사용하여 KRISS의 1차 표준기 조셉슨전압으로부터 소급된 저전압 표준기호부터 고전압까지의 소급성 연결을 위한 실험을 수행하였으며, 고전압 공급기의 안정도가 좋지 않은 경우라도 실험시간중의 안정도를 유지할 수 있는 방법을 찾아 측정하였다. 사용된 고전압 분압기는 225 MΩ의 명목 저항값을 가진 두 개의 고선압 저항과 공통으로 사용되는 15 kΩ의 저 전압 저항을 직렬 연결하여 구성되었다. 이 실험을 통하여 얻어진 100 ㎸까지의 각 분압비의 상대측정불확도는 5×10??(k=2)이다.
전기장 센서를 이용한 교류 400 ㎸ 고전압 분압기의 제작 및 평가
李相和(Sang-Hwa Lee),韓相吉(Sang-Gil Han),鄭在甲(Jae-Kap Jung),姜銓洪(Jeon-Hong Kang),金潤亨(Yoon-Hyoung Kim),鄭辰慧(Jin-Hye Jeong),韓相玉(Sang-Ok Han) 대한전기학회 2008 전기학회논문지 P Vol.57 No.3
Output voltage value of AC high voltage source has usually been obtained by measuring the low arm voltage of high voltage divider or the secondary voltage of high voltage transformer. In this study, we have fabricated the AC 400 ㎸ high voltage divider using high voltage electrode and electric field measurement sensor. The dividing ratio of the fabricated 400 ㎸ high voltage divider was evaluated using reference 400 ㎸ capacitive divider. The dividing ratio of 400 ㎸ high voltage divider is found to be 12,322 and has the good linearity within 0.63 % against AC high voltage up to 400 ㎸. Therefore, the developed 400 ㎸ high voltage divider could evaluate 400 ㎸ high voltage supply and voltage divider used in industry.