http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
강승원,Wipakorn Jevasuwan,Naoki Fukata,배준호 대한화학회 2017 Bulletin of the Korean Chemical Society Vol.38 No.9
We report on novel electrochemical capacitors with silicon nanowire (Si NW) electrodes prepared by a chemical vapor deposition (CVD) method. Si NWs were deposited on conductive stainless steel through the CVD method to form electrodes of the electrochemical capacitors. Electrochemical characteristics of Si NW electrodes were investigated and compared with those of bulk silicon wafer electrodes. Si NWs resulted in larger area-specific capacitance (>10 times) than bulk silicon, which is attributed to the enhanced surface area of NW morphology. NWs also exhibited high maximum and average mass-specific capacitances of 510 and 117 F g−1, respectively. Our study demonstrates that semiconductor Si NWs can be useful as electrodes of high-performance supercapacitors and next generation NWs-based architecture for electrochemical energy storages.
플라즈마 분사장치를 활용한 초고속 비행체의 항력감소 기초 실험
강승원,최종인,이재청,허환일 한국추진공학회 2017 한국추진공학회지 Vol.21 No.6
In this study, the fundamental test for drag reduction is carried out by using a plasma generator. Fundamental test setup is constructed of visualization and drag measurement system. The schlieren technique is used to visualize the plasma counterflow in supersonic flow. The penetration of the plasma jet and the change of the flow structure are observed through visualization results. Load cell is used to confirm possibility of drag reduction. Results show that drag was reduced by 6.2% using plasma jet in supersonic flow. 본 연구에서는 플라즈마 분사장치를 활용하여 항력감소를 위한 기초 실험을 수행하였다. 가시화 장비와 항력 측정 장비를 이용하여 기초 실험 장치를 구성하였다. 자유유동 환경에서 분사되는 플라즈마 역분사 제트를 가시화하기 위한 방법으로 쉴리렌 기법을 활용하였다. 가시화 실험 결과를 통해 플라즈마 제트의 침투와 유동구조 변화를 관찰하였다. 항력감소 가능성을 측정하기 위한 방법으로 로드셀을 이용한 측정을 수행하였다. 그 결과 초음속 자유유동 조건에서 역으로 분사되는 플라즈마를 통해 항력이 6.2% 감소함을 보였다.
토마토 'Micro-Tom' 과실의 eugenol synthase 유전자 클로닝, 단백질의 3차 구조 및 생리화학적 특성 예측
강승원,서상규,이태호,이긍표 경상대학교 농업생명과학연구원 2012 농업생명과학연구 Vol.46 No.4
Eugenol은 많은 식물에서 eugenol synthase에 의해 생합성되는 phenylpropene 계통의 휘발성 화합물이다. 그러나, 토마토 과실에서의 특징은 밝혀져 있지 않다. 이에 따라 토마토 ‘Micro-Tom'으로부터 RACE 기법을 이용하여 완전장 cDNA를 클로닝 하여, SlEGS라 명명하였다. SlEGS의 open reading frame은 921bp로, 307개의 아미노산 서열을 갖는 단백질로 번역되었다. BLAST 결과에 따라 SlEGS는 PhEGS1 및 CbEGS2와 각 67.1, 69.4%의 높은 상동성을 갖는 것으로 나타났다. CLC genomics workbench 프로그램을 이용하여 SlEGS의 아미노산 구성을 분석하였고, Swiss-PDB viewer 프로그램에서 homology modeling 기법으로 SlEGS의 3차원 단백질 구조를 구축한 후 ProSA-web 툴로 3차원 구조의 안정성을 확인 하였다. 또한 ExPASy의 ProtParam 툴을 이용하여 SlEGS의 생리화학적 특성을 분석 하였다. SlEGS의 추정 분자량은 33.93kDA이고 등전점(pI)은 5.85로 산성인 것으로 나타났다. 이와 더불어 SlEGS의 흡광 계수(EC), 불안정성 지수(II), alipathic 지수(AI), GRAVY값 등의 생리화학적 특성에 대한 분석을 실시 하였다. Eugenol is a volatile compound synthesized by eugenol synthase in various plants and belongs to phenylpropene compounds. However, characteristics of eugenol synthase in tomato has not been known. Therefore, we cloned a full length cDNA of a putative eugenol synthase from tomato 'Micro-Tom' using rapid amplification of cDNA ends (RACE) technique and named a clone SlEGS. Open reading frame of SlEGS was 921bp long and its deduced amino acid sequence was 307bp. The BLAST analysis indicated that SlEGS shared high similarity with PhEGS1 (67.1%) and CbEGS2 (69.4%). Amino acid composition of SlEGS was determined by CLC genomics workbench tool and 3D structure of SlEGS was constructed by homology modeling using Swiss-PDB viewer and validated using PROCHECK and ProSA-web tool. In addition, the physiochemical properties of SlEGS was evaluated using ExPASy's ProtParam tool. Molecular weight was 33.93kDa and isoelectric point was 5.85 showing acidic nature. Other properties such as extinction coefficient, instability index, aliphatic index, and grand average hydropathy was also analyzed.
IEEE 802.16e OFDMA-TDD 시스템 Digital Front End의 Fixed-point 설계 최적화
강승원,선태형,장경희,임인기,어익수,Kang Seung-Won,Sun Tae-Hyoung,Chang Kyung-Hi,Lim In-Gi,Eo Ik-Soo 한국통신학회 2006 韓國通信學會論文誌 Vol.31 No.7C
본 논문에서는 IEEE 802.16e OFDMA(Orthogonal Frequency Division Multiplexing-FDMA) TDD(Time Division Duplexing) 시스템 단말 수신기의 입력 신호에 대하여 DC 오프셋 보상, 자동 주파수 조정, 자동 이득 조정을 수행하는 DFE(Digital Front End)의 동작 원리와 Fixed-point 설계 방법에 대하여 설명하고, DFE의 성능을 ITU-R M. 1225 Veh-A 60km/h 채널 환경에서 시뮬레이션 결과를 통해 분석한다. DFE의 Fixed-point 설계시, 시스템의 성능에 영향을 주지 않는 범위 내에서 연산을 통해 출력되는 bit의 크기를 줄임으로서때 H/W 동작의 복잡도를 줄이고, Acquisition time과 안정도 간의 Trade-off를 고려하여 Loop Filter를 설계함으로서 DFE 의 Fixed-point 설계를 최적화 한다. In this paper, we explain the operation scheme and fixed-point design method of DFE (Digital Front End), which performs DC offset compensation, automatic frequency control, and automatic gain control over the input signal to the UE (User Equipment) receiver of IEEE 802.16e OFDMA-TDD system. Then, we analyze the performance of DFE under ITU-R M. 1225 Veh-A 60km/h channel environment. To optimize the fixed-point design of DFE, we reduce the number of bit resulted from calculation without performance degradation, leading to the decreased complexity of the operation in H/W, and design the Loop filter with considering trade-off between the Acquisition time and the Stability.