3단계 층화확률화응답모형

김종민,채성산,Kim, Jong-Min,Chae, Seong-S. 한국통계학회 2010 응용통계연구 Vol.23 No.3

직접면접으로 민감한 질문을 할때 발생하는 무응답이나 거짓응답의 문제를 개선하고자 Warner (1965)가 최초로 제안한 확률화응답모형에 관한 연구는 이후 많은 연구자들에 의해 개선, 발전되어 오고 있다. 본 연구에서 표본은 층화임의복원추출법에 의해 추출되었으며, 표본배분은 최적배분법에 의해 배분되었다. 한편, Kim과 Elam (2005)의 2단계 층화확률화응답모형을 확장한 3단계 층화확률화응답모형을 사용하였다. Kim과 Elam (2005)의 2단계 층화확률화응답모형과 상대효율을 비교한 결과 본 논문에서 제시한 3단계 층화확률화모형의 효율성이 상대적으로 높다는 결과가 도출되었다. 그러나 2단계확률화응답모형을 3단계로 확장함으로써 상대적으로 효율성은 증대되지만 반대로 조사과정의 어려움이 예상된다. Asking sensitive questions by a direct survey method causes non-response bias and response bias. Non-response bias arises from interviewees refusal to respond and response bias arises from giving incorrect responses. To rectify these biases, Warner (1965) introduced a randomized response model which is an alternative survey method for socially undesirable or incriminating behavior questions. The randomized response model is a procedure for collecting the information on sensitive characteristics without exposing the identity of the respondent. Many survey researchers have proposed diverse variants of the Warner randomized response model and applied their model to collect the information of sensitive questions. Using an optimal allocation, we proposed three-stage stratified randomized response technique which is an extension of the Kim and Elam (2005) two-stage stratified randomized response technique. In this study, we showed that the estimator based on the proposed response model is more efficient than Kim and Elam (2005). But by adding one more survey step to the Kim and Elam (2005), our proposed model may have relatively less privacy protection compared to the Kim and Elam (2005) model.

우리나라 호소환경 연구의 동향과 전망(2)

김종민,Kim, Jong-Min 환경보전협회 1996 환경정보 Vol.18 No.7

직교류 열교환기의 모듈수에 따른 열전달 및 압력강하 특성

김종민,김진수,유병훈,금성민,이창언,이승로,Kim, Jong-Min,Kim, Jinsu,Yu, Byeonghun,Kum, Sungmin,Lee, Chang-Eon,Lee, Seungro 한국에너지학회 2013 에너지공학 Vol.22 No.2

This study investigated the characteristics of heat transfer and pressure drop for cross-flow heat exchanger of premixed combustion system. The premixed burner was in front of a heat exchanger, and the number of heat exchanger modules was changed to investigate the characteristics of NOx and CO emissions with various equivalence ratios. In addition, the effectiveness, entropy generation and pressure drop were calculated by various number of heat exchanger modules and the performance of heat exchanger was analyzed by the exergy loss. 본 연구는 예혼합 연소시스템에 적용할 직교류 엇갈림 배열 열교환기의 열전달 및 압력강하 특성 검토를 목적으로 한다. 따라서 비예혼합화염보다 화염길이가 짧고 당량비 조절을 통해 NOx 및 CO 배출을 제어할 수 있는 예혼합방식의 버너 앞에 모듈로 구성된 열교환기를 설치한 후 당량비를 변화시킬 때 NOx와 CO의 배출특성을 검토하였다. 또한 열교환기의 모듈 변화에 대한 유용도, 엔트로피 생성량 및 압력강하를 계산하였고 엑서지 로스를 검토하여 열교환기의 성능을 분석하였다.

이축하중을 받는 십자형 시편의 파괴인성 및 구속효과 평가

김종민,김민철,이봉상,Kim, Jong Min,Kim, Min Chul,Lee, Bong Sang 한국압력기기공학회 2016 한국압력기기공학회 논문집 Vol.12 No.1

Current guidance considers that uniaxially loaded specimen with a deep crack is used for the determination of the ductile-to-brittle transition temperature. However, reactor pressure vessel is under biaxial loading in real and the existence of deep crack is not probable through periodic in-service-inspection. The elastic stress intensity factor and the elastic-plastic J-integral which were used for crack-tip stress field and fracture mechanics assessment parameters. The difference of the loading condition and crack geometry can significantly influence on these parameters. Thus, a constraint effect caused by differences between standard specimens and a real structure can over/underestimate the fracture toughness, and it affects the results of the structural integrity assessment, consequentially. The present paper investigates the constraint effects by evaluating the master curve $T_0$ reference temperature of PCVN (Pre-cracked Charpy V-Notch) and small scale cruciform specimens which was designed to simulate biaxial loading condition with shallow crack through the fracture toughness tests and 3-dimensional elastic-plastic finite element analyses. Based on the finite element analysis results, the fracture toughness values of a small scale cruciform specimen were estimated, and the geometry-dependent factors of the cruciform specimen considered in the present study were determined. Finally, the transferability of the test results of these specimens was discussed.

고온수전해용 Ni/YSZ와 Cu/YSZ 환원극의 미세구조 및 전기전도도 비교

김종민,신석재,우상국,강계명,홍현선,Kim, Jong-Min,Shin, Seock-Jae,Woo, Sang-Kook,Kang, Kae-Myung,Hong, Hyun-Seon 한국재료학회 2008 한국재료학회지 Vol.18 No.7

Hydrogen production via high high-temperature steam electrolysis consumes less electrical energy than compared to conventional low low-temperature water electrolysis, mainly due to the improved thermodynamics and kinetics at elevated temperaturetemperatures. The elementalElemental powders of Cu, Ni, and YSZ are were used to synthesize high high-temperature electrolysis cathodecathodes, of Ni/YSZ and Cu/YSZ composites, by mechanical alloying. The metallic particles of the composites were uniformly covered with finer YSZ particles. Sub-micron sized pores are were homogeneously dispersed in the Ni/YSZ and Cu/YSZ composites. In this study, The cathode materials were synthesized and their Characterizations properties were evaluated in this study: It was found that the better electric conductivity of the Cu/YSZ composite was measured improved compared tothan that of the Ni/YSZ composite. Slight A slight increase in the resistance can be produced for in a Cu/YSZ cathode by oxidation, but it this is compensated offset for by a favorable thermal expansion coefficient. Therefore, Cu/YSZ cermet can be adequately used as a suitable cathode material of in high high-temperature electrolysis.

Smart Air Conditioning Service Using Bio-signal and Emotional Lighting

김종민,류갑상,Kim, Jong-Min,Ryu, Gab-Sang Korea Convergence Society 2021 한국융합학회논문지 Vol.12 No.9

최근들어 가전시장에서 융합기술을 이용한 제품 차별화는 소비자로부터 많은 호응을 얻고 있다. 그러나 에어컨 제품은 기계적 운영에서 센서와 플랫폼이 결합된 인공지능을 위한 융합기술이 적용하는 초기단계에 있어서 많은 연구개발이 필요한 분야이다. 본 논문에서는 IR-UWB 기술을 이용한 비접촉 방식의 생체신호(호흡수, 이동) 수집기술을 개발하였다. 생체신호를 이용하여 사용자의 위치에 따라 에어컨 방향을 제어한다. 또한 최적의 수면 환경을 제공하기 위해 수면상태를 모니터링 한다. 감성조명과 ASMR은 안락하고 감성적인 삶의 공간을 제공하기 위해 개발되었다. 그리고 개발된 융합기술을 기반으로 편리하고 안락한 휴식공간을 제공하는 지능형 스마트 에어컨 서비스 플랫폼을 제안하였다. Recently, in the market of home appliances, the technical differentiation of products using convergence technology has been receiving a lot of response to satisfy consumer demand. However, air-conditioner products are an area that requires research and development in the early stages of convergence technology. In this paper, it is developed that a non-contact bio-signal(respiration, movement) collection technology using IR-UWB(Impulse-Radio Ultra Wideband) technology, which controls the air-conditioner direction according to the user's location and also monitors sleep to provide an optimal sleep environment. In addition, emotional lighting and ASMR are developed to provide a comfortable and emotional place of life. Finally, based on the developed convergence technology, we develop intelligent smart air-conditioning services for the convenience of daily life and a comfortable resting space.

이봉분포 마스터커브를 이용한 SA508 Gr. 3 원자로용기강의 파괴인성 평가

김종민,김민철,이봉상,Kim, Jong Min,Kim, Min Chul,Lee, Bong Sang 한국압력기기공학회 2017 한국압력기기공학회 논문집 Vol.13 No.2

The standard master curve (MC) approach has the major limitation because it is only applicable to homogeneous datasets. In nature, materials are macroscopically inhomogeneous and involve scatter of fracture toughness data due to various deterministic material inhomogeneity and random inhomogeneity. RPV(reactor pressure vessel) steel has different fracture toughness with varying distance from the inner surface of the wall due to cooling rate in manufacturing process; deterministic inhomogeneity. On the other hand, reference temperature, $T_0$, used in the evaluation of fracture toughness is acting as a random parameter in the evaluation of welding region; random inhomogeneity. In the present paper, four regions, the surface, 1/8T, 1/4T and 1/2T, were considered for fracture toughness specimens of KSNP (Korean Standard Nuclear Plant) SA508 Gr. 3 steel to investigate deterministic material inhomogeneity and random inhomogeneity. Fracture toughness tests were carried out for four regions and three test temperatures in the transition region. Fracture toughness evaluation was performed using the bimodal master curve (BMC) approach which is applicable to the inhomogeneous material. The results of the bimodal master curve analyses were compared with that of conventional master curve analyses. As a result, the bimodal master approach considering inhomogeneous materials provides better description of scatter in fracture toughness data than conventional master curve analysis. However, the difference in the $T_0$ determined by two master curve approaches was insignificant.

JAVA 3D를 이용한 웹 기반 입체도형 학습 프로그램의 개발

김종민,주영진,Kim, Jong-Min,Ju, Young-Jin 한국수학사학회 2008 Journal for history of mathematics Vol.21 No.1

본 논문에서는 입체도형에 대한 학습을 효과적으로 수행하기 위한 웹 기반 입체 도형 학습 프로그램을 설계하고 구현하였다. 이를 위해 학습자에게 편리한 사용자 인터페이스와 입체도형 학습에 필요한 기능을 분석하였으며, 학습자의 흥미를 유발 할 수 있는 다양한 입체도형 학습기능을 개발함으로써 실제 수업 현장에서 쓰일 수 있는 유용한 학습프로그램이 될 수 있도록 하였다. 기존 연구와의 비교분석과 초등학교 학생들의 사용 평가를 통해 본 프로그램의 유용함을 확인하였다. In this study, we designed and developed Web-based 3D figure learning program which can create and control the 3D figures effectively in cyberspace. To develop this learning program, we used the JAVA 3D because JAVA 3D can express 3D figures effectively in cyberspace and is platform independent. This program is very helpful for learners to understand the concept of 3D space and the formulation of space concept effectively. Also it motivates learners to understand 3D figures study and enables Self-Directed-Learning.

Special Issues - 전기요금 연료비연동제

김종민,Kim, Jong-Min 대한전기협회 2011 전기저널 Vol.412 No.-

환경오염피해에 대한 분쟁해결

김종민,Kim, Jong-Min 환경보전협회 1991 환경정보 Vol.13 No.10