http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김홍석,오민석,천창율,Kim Hong-Seok,Oh Min-Seok,Cheon Chang-Yul 한국전자파학회 2005 한국전자파학회논문지 Vol.16 No.8
본 논문에서는 캡슐 내시경의 무선통신이 이루어지기 위한 환경 연구와 더불어 그에 적합한 수신 안테나를 설계하였다. 제안된 안테나는 인체와 같은 multi-loss layer환경에서 전파 손실을 최소화 하고 magnetic field를 이용하기 위해 루프 안테나로 설계했다. 주파수 대역은 인체 내 전파 손실을 고려하여 $400\~500$ MHz이고 FCC 규정에 따라 인체 각각의 조직에 대한 유전율과 도전율을 추출했다. 이를 하나의 등가 모델로 설정하고 그에 따른 유전율과 도전율을 계산해서 인체를 대신할 수 있는 수용액을 제조하였다. 전파 손실이 심한 인체 내에서 캡슐이 이동함에 따라 수신 레벨이 급격히 감소하기 때문에 배열 안테나가 요구된다. 1 mW의 신호를 송신하는 송신 안테나 위치에 상관없이 배열 안테나의 신호 레벨은 평균 -60 dBm 정도로 충분한 신호 검출이 가능한 것을 확인했다. In order to accomplish a wireless communication of capsule endoscopy, an environment study in the human body and receiving antenna design have been performed. The proposed antenna is the loop antenna designed to minimize the propagation loss in multi-loss layer such as the human body and utilize the magnetic field. Considering the propagation loss in the human body, the frequency range is from 400 MHz to 500 MHz. Acorrrding to the FCC regulations, the permittivity and conductivity for each human tissue were extracted. We set up an equivalent model and make an aqueous solution which is replaced with the human body. Due to movement of capsule in the human body which propagation loss is extremly severe, an array antenna is required. Irrespective of the location of transmission antenna transmitting a signal of 1 mW, we confirme what it is possible for the enough signal detection as the average signal level of array antenna is -60 dBm.
시멘트/Fe(II) 및 hematite/Fe(II) 시스템의 TCE 분해반응 시 Ca 성분의 영향
김홍석,황경엽,안준영,이주영,황인성,Kim, Hong-Seok,Hwang, Kyung-Yup,Ahn, Jun-Young,Yi, Jou-Young,Hwang, In-Seong 한국지하수토양환경학회 2011 지하수토양환경 Vol.16 No.1
Reactive reductants of cement/Fe(II) systems in dechlorinating chlorinated hydrocarbons have not been identified. The previous studies showed that a hematite/CaO/Fe(II) system had TCE degradation characteristics similar to those of cement/Fe(II) systems with regard to degradation kinetics and that lime (CaO) plays an important role in enhancing the reactivity for TCE dechlorination. The current study shows identified the formation of gypsum ($CaSO_4$) in the hematite/CaO/$FeSO_4$ system through the XRD analysis. The amounts of the gypsum increased with increment of the initial CaO dose. However, when CaO in the hematite/CaO/$FeSO_4$ system was replaced with gypsum, TCE degradation was not observed. Ca-removed Portland cement extracts (CPCX) in combination with $FeSO_4(CPCX/FeSO_4)$ showed no TCE degradation. On the other hands, the Portland cement extracts (PCX) in the presence of $FeSO_4(PCX/FeSO_4)$ and CPCX/CaO/$FeSO_4$ systems degraded 0.2 mM TCE within 5 days, indicating that CaO also played an important role dechlorination reactions in the systems. The pseudo-first-order rate constants (k) of the CPCX/CaO/$FeSO_4$ systems were 0.20, 0.24, and 0.72 $day^{-1}$, when the CaO dosages were 25, 50 and 75 g/L, respectively. The XRD analyses showed identified the common peaks having the d-values of 3.02, 2.27, and 1.87 in the reaction systems that showed TCE degradation. However, it was not possible to clearly identify the crystalline minerals having the three peaks from the references in JCPDS cards. This study reveals that the reactive agents in the cement/Fe(II) and the hematite/Fe(II) systems are likely to be those containing CaO and Fe(II).
박막 요소를 이용한 스피커 그릴 일체형 맵 포켓의 사출 성형 해석
김홍석,조명상,손중식,서태수,김태웅,Kim, Hong-Seok,Jo, Myeong-Sang,Son, Jung-Sik,Seo, Tae-Su,Kim, Tae-Ung 대한기계학회 2001 大韓機械學會論文集A Vol.25 No.8
In order to reduce the time and cost for assembly, automobile speaker grills have been injection molded with door trims or map pockets in one piece recently. However, several defects such as short shots or air traps can easily occur due to the decreased fluidity of the melting polymer according to the excessive heat transfer to the mold. Therefore, it is necessary to optimize the resin feed system and predict possible defects by CAE analysis. However it is not possible to obtain exact analysis results for the speaker grill by using general shell elements since the heat transfer in the thickness direction which is the dominant factor of the filling stage can not be considered. Therefore, there have been several efforts to simulate the injection molding nature of the speaker grill by using shell elements with an effective thickness which is smaller than the actual thickness of the part. Two empirical values have been recommended for the effective thickness in real practice. One is 50∼70% of the thickness of the speaker grill and another is the gap distance between the adjacent holes. In this paper, CAE analyses of a map pocket with a speaker grill were conducted using shell elements with both of these recommended effective thicknesses, and the predicted flow fronts were compared with the findings from injection molding experiments. The commercial code MOLDFLOW was used for injection molding analysis and an 850 ton injection molding machine was used for experiments.
하폐수의 재사용 및 방류를 위한 폭기조 내 표준산소전달 효율 모니터링 시스템에 관한 연구
김홍석,김용범,고경한,김상우,심환보,Kim, Hong-Seok,Kim, Yong-Beom,Ko, Kyung-Han,Kim, Sang-Woo,Shim, Hwan-bo 한국자원리싸이클링학회 2019 資源 리싸이클링 Vol.28 No.6
본 연구에서는 활성 슬러지 하수처리장에서 배출되는 off-gas에 대한 포집 및 측정 모니터링을 통해 폭기조의 산소전달효율을 측정하고 청수와 비교하여 시스템의 신뢰성을 검증하는 연구를 수행하였다. 먼저, 청수를 기반으로 용존산소, 산소전달계수 및 표준산소전달효율을 측정하였으며 각각 8.60 mg/L, 9.49/hr, 23.96%의 값이 얻어졌다. 한편, 하수처리장 현장에서 진행한 off-gas 시험 결과 표준산소전달효율이 22.81%로 계산되어 청수와의 차이가 거의 없는 것으로 나타났다. 이는 현장에 설치된 산기관의 성능 및 폭기조의 상황을 모니터링 시스템을 이용해 실시간으로 확인함으로써 신뢰성있는 데이터를 확보할 수 있음을 의미한다.