http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
레이저 유도초음파(LBU)를 이용한 고온에서 물성측정에 관한 연구
백영기(Young-Ki Baek),유동석(Dong-Suk Yoo) 산업기술교육훈련학회 2012 산업기술연구논문지 (JITR) Vol.17 No.2
In this research, using laser-guided ultrasonic inspection system to measure the properties at high temperatures was on purpose. One of propose laser-based ultrasonic technology is a non-contacted, remote measurements. It is possible to measure an ultrasound at high temperatures using laser-based ultrasonic because the benefits of laser-based ultrasonic was a remote and non-contact measurement, but convention methods was not possible at high-temperatures. For the detection of ultrasound at high temperatures were a variety of researches in progress. This study is divided into two parts. First, according to the direction of the progress of the ultrasound, properties at normal temperature were detected. Depending on the progress of the ultrasound direction, the velocity of ultrasound was measured and compared respectively. Secondly, the specimen into the high temperature-electric furnace, changes in temperature, and the measurement of the ultrasound signal. Temperature of the furnace was changed 0 ℃ to 1000℃. In conclusion, depending on the temperature rise has reduced the speed of ultrasound. And Young s modulus was also reduced. However, the Poisson s ratio was increased. In particular, the velocity of ultrasound and Young s modulus is the increasing decline in the near a 400℃. Through this research in high-temperature laser-based ultrasonic to prove that the ultrasound was ideal for transmitting and receiving. Additional research is needed to overcome the environmental restrictions.
김중영(Jung-Young Kim),백영기(Young-Ki Baek) 산업기술교육훈련학회 2014 산업기술연구논문지 (JITR) Vol.19 No.4
Due to high oil prices and environmental issues, automobile industry have been a lot of researches and investments in order to produce a high-efficiency automobile. In the case of automobile wheel use a lightweight material to increase fuel efficiency and use the mold to increase the producing efficiency. Friction Stir Welding is very good welding method at low weight material. but Friction Stir Welding zone is not same the other welding Methods. In this paper, to detecting characteristics of the Friction Stir Welding zone using the Shearography. and compare the tensile test results.
KPU 가치투자 지원 시스템(KPU-VISS)의 설계 및 구현
함진헌(Jin-hun Ham),백영기(Young-ki Baek),유제욱(Jae-wook Yoo),이정준(Jeong-joon Lee) 한국정보과학회 2008 한국정보과학회 학술발표논문집 Vol.35 No.1
최근 들어, 기업의 내재 가치를 평가하여 투자에 활용하는 이른바 가치투자에 대한 많은 분석과 전략들이 나오고 있다. 그러나 현존하는 대부분의 투자 지원 툴들은, 단기적으로 등락을 반복하는 주가에 매매조건을 제시하여 차액을 얻는 방식인 기술적 분석 툴로서 기업의 내재 가치를 평가하여 투자를 지원하기에는 제한이 있다. 때문에 가치 투자자들은 기업의 가치를 체계적이고 객관적으로 판단하기 보다는, 몇몇의 공시된 자료들을 보고 개인의 판단에 따라 평가하는 경우가 대부분이다. 따라서 감정과 선입견을 배제한 기존의 기술적 분석 툴과 같이 기업의 가치를 정량적으로 추정하여 다양한 전략개발을 할 수 있는 툴이 필요한 실정이다. 본 논문에서는 기업의 가치를 정량화하여 가치투자 전략을 개발할 수 있는 가치투자 시스템(이하 KPU-VISS)의 설계 및 구현 내용을 기술한다. 즉, 본 시스템은 주식가격을 포함한 기업의 다양한 정보와 경기 지표 등을 이용하여 기업의 가치 모델 개발을 지원하고, 이 모델에 근거하여 저평가된 종목을 검색하는 전략 개발을 지원한다. 또한, 개발된 전략을 과거의 특정 시점에 반영시킨 투자 시뮬레이션을 통하여, 전략의 실효성을 검증하는 기능도 지원한다. 본 논문에서 제안한 가치투자 지원시스템은 최초로 가치 투자전략의 개발과 검증을 지원하는 시스템으로, 향후 가치투자 시스템 개발을 위한 선도적인 방향을 제시할 것으로 예상한다.
白榮基 漢陽大學校 基礎科學硏究所 1981 基礎科學論文集 Vol.1 No.-
1-매개변수群論은 ??-多樣體와 Lie群을 硏究하는데 有用하다. 그러나 이 理論은 ??-多樣體에서 Vector 場論으로 시작되어진다. 이 論文의 目的은 1-매개변수群과 Vector場 사이의 관계를 명확하게 하는데 있다.
A Note on the Geodesics of Surfaces
Baek, Young Ki 漢陽大學校 基礎科學硏究所 1989 基礎科學論文集 Vol.8 No.-
測地線論은 徵分可能한 多樣體를 硏究한는데 有用하다. 이 論文의 目的은 Serret-Frenet equations의 類推性을 찾아 證明하는데 있다. The theory of the geodesic is useful to study differentiable manifold. The purpose of this paper is to prove the analogues of the Frenet-Serret equations.