http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
직선 표현영역 및 특징파라메터에 의한 스테레오 영상의 정합
최종웅(Jong-Woong Choe),김태균(Tae-Kyun Kim) 한국정보과학회 1995 한국정보과학회 학술발표논문집 Vol.22 No.1
본 연구는 스테레오 영상에서 추출한 직선 세그먼트(segment)를 정합시키는 데 관한 연구결과이다. 인간이 조형하는 건축물, 실내공간, 산업체 현장의 자동화관련 및 계측을 필요로하는 환경에는 수만은 직선성분이 존재하며, 이러한 성질과 특성을 이용하여 영상을 정합시키는 새로운 메카니즘(mechanism)을 개발하는 데 주안점을 두었다. 주로 애매하고 임의적인 낮은 조도(contrast)를 가진 선을 포함하는 복잡한 영상에 잘 적응하며 직선성분을 추출할 수 있도록 발전시켰다. 특히 직선을 추출하는 데 적합하며 단순하면서도 견실하며(robustic) 직선표현영역을 분할하는 새로운 방법을 함께 제안하였다. 정합(matching)은 직선의 한 쌍(pairs)에서 추출된 미분방향값(gradient orientation), 상관계수(correlation coefficient), 조도(contrast) 평균값과 함께 근접점오차값 윈도우(disparity window)를 이용하였다. 결과적으로 두 영상을 일치시키는 데 필요한 근접점오차값(disparity)을 화소단위(pixel)로 얻어 낼 수 있었으며 이는 카메라와 그 상대적인 이동거리를 산출하는 데 필요한 정보가 된다. 이 연구의 실용화 범위는 영상을 이용한 원격경보씨스템, 로봇, 수치제어장치 및 검사, 계측장치 등의 머신비젼(machine vision)을 포함하여 항공영상정보처리 등으로 볼 수 있다.
최종웅(Jong-Woong Choe),이경행(Kyung-Haeng Lee),김태균(Tae-Kyun Kim) 한국정보과학회 1995 정보과학회논문지(B) Vol.22 No.10
본 연구는 스테레오 영상을 이용하여 직선세그먼트를 정합시키고 위치결정의 가능성을 얻기 위한 연구결과이다. 본 논문은 주로 애매하고 낮은 임의 대조비를 가진 선을 포함하는 복잡한 영상에 잘 적응하는 새로운 알고리즘을 제시한다. 특히 직선을 추출하는데 적합하며 단순하고도 견실한 직선표현영역을 분할하는 실용적인 방법을 함께 제안하였다. 정합은 직선의 한 쌍에서 추출된 미분방향값, 상관계수, 대조비평균값과 함께 근접점시차값 정합윈도우를 이용하였다. 결과적으로 두 영상을 일치시키는 데 필요한 근접점시차값을 화소단위로 얻어낼 수 있었으며 이는 카메라 또는 물체의 상대적인 이동거리를 산출하는데 필요한 정보로 이용되어 물체의 움직임이나 스테레오 영상의 차이에 따른 카메라 혹은 물체의 이송량을 제어하는 궤환값으로 사용된다. 이 연구의 실용화 범위는 영상을 이용한 원격경보장치, 로봇비젼, 수치제어 및 검사장치, 유체의 유동해석 계측장치 및 항공사진에 의한 지리정보처리 등이다. This paper presents the effective method to match straight line segments and possibility of positioning using stereo images. This paper proposes the new algorithm suitable to the ambiguous and arbitrary image with low contrast and complexity mainly. Especially, this paper emphasizes the practical development of simple and robust identification for straight line support regions. This matching is using some descriptive parameters extracted from a pair of straight line, whose parameters are gradient orientation, average of contrast range, correlation coefficient and disparity windows. Finally this paper gets disparity with pixel units for matching the stereo images, and the information will be very useful for the calculation of relative movements and distance between camera and mechanism of guidance. The practical scopes of this research are remote alarm-detecting image system, robot vision, numerical control and inspection equipments, measurement by fluid flow analysis, and geometric information system by aerial images.
CCD 특성에 의하여 왜곡된 유체유동영상의 개선에 관한 연구
최종웅(Jong-Woong Choe),김태균(Tae-Kyun Kim) 한국정보과학회 1996 한국정보과학회 학술발표논문집 Vol.23 No.2A
본 연구는 CCD카메라가 가지는 전자 및 열특성에 의하여 왜곡된 유체유동의 영상을 개선하여 처리결과에 영향을 미치는 요인을 사전에 제거하는 데 관한 것이다. 본 논문에서는 유체영상을 촬영하기 전에 먼저 카메라의 뷰파인더를 통하여 왜곡영상을 획득하고 원래의 영상에서 보정하는 새로운 알고리즘을 제안하였다. 이는 기존에 일반적으로 영상으로 부터 잡음을 제거하는 필터링(filtering)기술에 대한 보다 진보된 해결방법을 제시하기 위하여 연구된 결과로 사용하는 환경에 따라 변하는 불완전한 영상검출소자인 CCD의 특성을 영상에서 보정하여 개선시킴으로서 유동영상에서 최종적으로 구해지는 유체의 유동속도와 방향값을 정상적으로 획득하게 해준다. 특히 레이져광원을 사용하여 얻어진 작은 입자영상(particle image)들은 조명의 상태와 촬영환경 및 장치에 따라서 발생하는 얼룩이나 잡음 등에 아주 민감하여 입자들의 정합(matching)과정에서 전혀 엉뚱한 대응점(corresponding points)으로 계산이 될 수 있으므로 본 연구결과는 이러한 문제를 개선시키는 데 아주 유용하다. 본 연구는 유체유동해석 뿐아니라 다른 영상처리분야에서도 많이 사용될 수 있다.
동적 물성치를 고려한 진공 인터럽터 충격특성의 영향인자 분석
임지호,송정한,허훈,박우진,오일성,안길영,최종웅,Lim, Ji-Ho,Song, Jeong-Han,Huh, Hoon,Park, Woo-Jin,Oh, Il-Seong,Ahn, Gil-Young,Choe, Jong-Woong 대한기계학회 2002 大韓機械學會論文集A Vol.26 No.5
Vacuum interrupters in order to be used in various switch-gear components such as circuit breakers, distribution switches, contactors, etc. spread the arc uniformly over the surface of the contacts. The electrodes of vacuum interrupters are made of sinter-forged Cu-Cr materials for good electrical and mechanical characteristics. Since the closing velocity is 1-2m/s and impact deformation of the electrode depends on the strain rate at that velocity, the dynamic behavior of the sinter-forged Cu-Cr is a key to investigate the impact characteristics of the electrodes. The dynamic response of the material at the high strain rate is obtained from the split Hopkinson pressure bar test using disc-type specimens. Experimental results from both quasi-static and dynamic compressive tests are Interpolated to construct the Johnson-Cook model as the constitutive relation that should be applied to simulation of the dynamic behavior of the electrodes. The impact characteristics of a vacuum interrupter are investigated with computer simulations by changing the value of five parameters such as the initial velocity of a movable electrode, the added mass of a movable electrode, the wipe spring constant, initial offset of a wipe spring and the virtual fixed spring constant.