http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
송승헌(Seung-Hun Song),박지원(Ji-Won Park),박지희(Ji Hee Park),성태경(Tae-Kyung Sung) 제어로봇시스템학회 2011 제어·로봇·시스템학회 논문지 Vol.17 No.1
The GPS new civil signal is modulated on the L2 carrier at a frequency of 1227.6㎒. The L2C signal is composed of two multiplexed code signals, which include CM code with a 10,230 chip sequency repeating every 20ms, and CL code which has a 767,250 chip sequency repeating every 1.5 seconds. Thus, the new civil signal have much improved cross correlation properties so that the position fixing can be possible even with very weak signals. However, it requires very long acquisition time because of its long code length. This paper presents an efficient signal acquisition method for L2C AGPS receiver. Snapshot mode and coarse time assistance are assumed and total integration time is given by 1.5 sec. By SNR worksheet and computer simulation, it is proven that L2C signal can be acquired with very weak power less than -150㏈m. Considering the acquisition time and the sensitivity, it is recommended that the highest power signal is acquired with CM code first to reduce TTFF. By the timing synchronization, at this time, search space of the code phase for other signals can be greatly reduced so that CL code can be used in signal acquisition to maximize sensitivity with small computation.
WiBro 망을 이용한 지상파 측위 시스템의 가청성 분석
송승헌(Seung-Hun Song),박지원(Ji-Won Park),성태경(Tae-Kyung Sung) 大韓電子工學會 2010 電子工學會論文誌-TC (Telecommunications) Vol.47 No.1
이동 통신망을 이용한 지상파 측위 기술은 GPS와 더불어 LBS를 구성하기 위한 핵심 기술이다. WiBro 시스템은 차세대 통신망으로 주목 받고 있으며, WiBro 망에서 매 프레임마다 방송되는 프리앰블 심볼의 특성을 이용하면 TDOA 방식의 무선 측위가 가능하다. 그러나 WiBro 시스템은 셀룰러 구조로 되어 있기 때문에 일반적으로 단말기가 다수의 기지국 신호로부터 거리정보를 구하기 어렵다. WiBro 망에서 삼변측량을 이용한 무선 측위를 하기 위해서는 수신 신호의 세기를 증가시켜야 하며, 장기 중첩 기법을 이용하여 가청성을 향상 시킬 수 있다. 본 논문에서는 주파수 잔여 오차와 수신 신호의 SNR에 따른 동기 중첩 및 비동기 중첩의 성능을 비교하여 WiBro 망에서 최적의 혼합 중첩 방법을 제시하였다. 컴퓨터 시뮬레이션을 통하여 혼합 중첩의 성능을 분석하고 WiBro 망을 이용한 무선 측위의 가능성 및 한계를 확인하였다. Geo-location using a cellular network is a core technology for LBS together with GPS. With preamble symbols broadcasted in each frame, geo-location using WiBro network can be easily implemented. Because the WiBro network has a cellular structure, it is difficult for a mobile station to detect signals from multiple base stations. In order to get user position using trilateration, long integration techniques for sensitivity enhancement should be employed. This paper presents hybrid integration scheme for WiBro network. By analyzing coherent and non-coherent integration loss according to frequency residual and SNR respectively, optimal combination of the hybrid integration is proposed. Simulation results show that the hybrid integration method is profitable in WiBro network when the frequency residual is estimated and compensated accurately.
宋承憲(Seung-Hun Song),金棟赫(Dong-Hyouc Kim),李誠浩(Sung-Ho Lee),禹貞旭(Jung-Wook Woo),成泰慶(Tae-Kyung Sung) 대한전기학회 2007 전기학회논문지 Vol.56 No.8
To implement a high-precision lightning tracking system utilizing TDOA measurements, high-speed data acquisition and precise timing synchronization between ground sensors should be achieved. At the same time, considering the size of digitizer's memory, the data memory needs to be managed so that only the sampled data around the occurrence of stepped leader pulse is stored. This paper presents a detection-and-acquisition system for lightning signals that is the main equipment of ground sensor in lightning tracking system. GPS clock module is used to get precise timing synchronization and the 500㎒ high speed digitizer is employed. In order to detect the leading edge of the lightning pulse and save the sampled data and its timing, lightning detection module is implemented and multi-record method is employed in the proposed system. Field experiment results show that the proposed system can detect and save the lightning signal efficiently.
순방향 링크 AOA 측정치를 이용한 CFS 방법의 성능 개선
임현자(Hyun-Ja Im),박지원(Ji-Won Park),송승헌(Seung-Hun Song),성태경(Tae-Kyung Sung) 대한전기학회 2009 전기학회논문지 Vol.58 No.3
This paper presents a modified CFS (Closed-Form Solution) for FLAOA (Forward Link AOA) measurements. During when the pseudo-measurement equation for FLAOA is derived, the angle measurement noise is treated more carefully in approximation. As the covariance matrix of the pseudo-measurement noise is influenced by unknown user positions and azimuth, a two-step estimation technique is used in the proposed CFS. The performance of the proposed CFS for FLAOA is compared to that of the conventional CFS for FLAOA and RLAOA (Reverse Link AOA) in a computer simulation. Simulation results show that the proposed method is potentially suitable for applications involving the localization and guidance of indoor mobile robots..
다중경로 환경에서의 TOA방식과 TDOA방식의 측위성능 비교
朴志原(Ji-Won Park),朴智熙(Ji-Hee Park),宋承憲(Seung-Hun Song),成泰慶(Tae-Kyung Sung) 대한전기학회 2009 전기학회논문지 Vol.58 No.2
TOA(time-of-anival) and TDOA(time-difference-of-anival) positioning techniques are commonly used in many radio-navigation systems. From the literature, it is known that the position estimate and error covariance matrix of TDOA obtained by GN(Gauss-Newton) method is exactly the same as that of TOA when the error source of the range measurement is only an lID white Gaussian noise. In case of goo-location and indoor positioning, however, multi-path or NLOS(non-line-of-sight) error is frequently appeared in range measurements. Though its occurrence is random, the multipath acts like a bias for a stationary user if it occurs. This paper presents the comparisons of error characteristics between TOA and TDOA positioning in presence of multi-path or NLOS error. It is analytically shown that the position estimate of TDOA is exactly the same as that of TOA even when bias errors are included in range measurements with different magnitudes. By computer simulation, position estimation error and error distribution are analyzed in presence of range bias errors.