http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Yun Que,Cheng-cheng Long,Fu-Quan Chen 대한토목학회 2023 KSCE Journal of Civil Engineering Vol.27 No.8
In the area of high seismic intensity, there were few methods for calculating active earth pressure (Ea). Especially for the cantilever retaining wall with long relief shelf (CRW-LRS), the theoretical method lags behind the practical engineering. The seismic active earth pressure (Es) of the CRW-LRS subject to translational mode was researched. By finite element method (FEM), the failure mode of the active limit state under seismic load was evaluated. The results show that the backfill behind the wall generates the first sliding surface at the wall heel bottom, the second at the wall heel top, and the third at the relief shelf top. The calculation formula of Es under long relief shelf failure mode was proposed using the limit analysis method of a horizontal differential layer. The calculation results were compared with the FEM results to prove the rationality and reliability of the theoretical solution. The effects of relief shelf relative length (l) and position (m), wall heel length (n), internal frictional angle of the backfill (ϕ), seismic horizontal acceleration (ah), and seismic vertical acceleration (av) on Es were studied.
Mao-Long Chen,Tian-Hui Lu,Ling-Li Long,Zhou Xu,Li Ding,Yun-Hui Cheng 대한환경공학회 2022 Environmental Engineering Research Vol.27 No.2
This investigation enables amino-functionalized metal–organic frameworks (MOFs) materials for the removal of imidacloprid (IMC). Two Fe-based MOF materials of NH₂-MIL-88B(Fe) and NH₂-MIL-101(Fe) both exhibited high adsorption capacity and Fenton-like degradation ability for IMC which were utilized to remove IMC from aqueous solution. Although the adsorption capacity of NH₂-MIL-101(Fe) was higher than that of NH₂-MIL-88(Fe), the degradation abilities of both MOF materials were similar. The removal efficiencies were evaluated through several basic studies, including concentrations of catalyst (0.12-0.3 g/L) and IMC (20-100 mg/L), pH of solution (3-11), and amounts of 30% H₂O₂ (0-2.0 μL/mL). By optimizing the above factors, the total removal ratio of IMC by NH₂-MIL-88B(Fe) was as high as 93%, whereas the removal ratio of NH₂-MIL-101(Fe) was 97%. Moreover, these MOF materials were proven to be stable and recyclable. The free radical quenching experiment and density functional theory calculation were applied to research the removal mechanism, and the hydroxyl radicals (·OH) was found to be the key active intermediate. The high catalytic efficiency can be attributed to the synergy of the Fe<SUP>3+</SUP>/Fe<SUP>2+</SUP> redox cycle.
Heavy concrete shielding properties for carbon therapy
Jin-Long Wang,Jiade J Lu,Da-Jun Ding,Wen-Hua Jiang,Ya-Dong Li,Rui Qiu,Hui Zhang,Xiao-Zhong Wang,Huo-Sheng Ruan,Yan-Bing Teng,Xiao-Guang Wu,Yun Zheng,Zi-Hao Zhao,Kai-Zhong Liao,Huan-Cheng Mai,Xiao-Dong Korean Nuclear Society 2023 Nuclear Engineering and Technology Vol.55 No.6
As medical facilities are usually built at urban areas, special concrete aggregates and evaluation methods are needed to optimize the design of concrete walls by balancing density, thickness, material composition, cost, and other factors. Carbon treatment rooms require a high radiation shielding requirement, as the neutron yield from carbon therapy is much higher than the neutron yield of protons. In this case study, the maximum carbon energy is 430 MeV/u and the maximum current is 0.27 nA from a hybrid particle therapy system. Hospital or facility construction should consider this requirement to design a special heavy concrete. In this work, magnetite is adopted as the major aggregate. Density is determined mainly by the major aggregate content of magnetite, and a heavy concrete test block was constructed for structural tests. The compressive strength is 35.7 MPa. The density ranges from 3.65 g/cm<sup>3</sup> to 4.14 g/cm<sup>3</sup>, and the iron mass content ranges from 53.78% to 60.38% from the 12 cored sample measurements. It was found that there is a linear relationship between density and iron content, and mixing impurities should be the major reason leading to the nonuniform element and density distribution. The effect of this nonuniformity on radiation shielding properties for a carbon treatment room is investigated by three groups of Monte Carlo simulations. Higher density dominates to reduce shielding thickness. However, a higher content of high-Z elements will weaken the shielding strength, especially at a lower dose rate threshold and vice versa. The weakened side effect of a high iron content on the shielding property is obvious at 2.5 µSv=h. Therefore, we should not blindly pursue high Z content in engineering. If the thickness is constrained to 2 m, then the density can be reduced to 3.3 g/cm<sup>3</sup>, which will save cost by reducing the magnetite composition with 50.44% iron content. If a higher density of 3.9 g/cm<sup>3</sup> with 57.65% iron content is selected for construction, then the thickness of the wall can be reduced to 174.2 cm, which will save space for equipment installation.
( Ping Sheng ),( Yun-long Cheng ),( Chuan-chuan Cai ),( Wei-jin Guo ),( Ying Zhou ),( Ge Shi ),( Yi-ming Fan ) 대한피부과학회 2016 Annals of Dermatology Vol.28 No.6
Background: Although Becker`s nevus (BN) is a relatively common disease, the systematic studies of clinicopathological and immunohistochemical results are poorly reported. Objective: To investigate the clinicopathological features and immunohistochemical alterations of keratinocyte proliferation, melanocyte density, smooth muscle hyperplasia and nerve fiber distribution in BN. Methods: Clinical and pathological data were collected in 60 newly-diagnosed BN cases. Immunohistochemical stain of Ki-67, Melan-A, keratin 15, smooth muscle actin and protein gene product 9.5 was performed in 21 cases. Results: The median diagnostic and onset age was 17 and 12 years, respectively. Skin lesions usually appeared on the upper trunk and upper limbs. The pathological features included the rete ridge elongation and fusion and basal hyperpigmentation. Epidermal Ki-67, Melan-A and keratin 15 expression and dermal nerve fiber length were significantly higher in lesional and perilesional skin than in normal skin (p<0.05∼0.01), while smooth muscle actin expression was upregulated only in skin lesion (p<0.05). Conclusion: Although the clinical diagnosis of BN is often straightforward, histopathology is helpful to differentiate from other pigmentary disorders. The hyperproliferation of keratinocytes, melanocytes, arrector pili muscle and dermal nerve fibers could be involved in the patho-genesis of BN. (Ann Dermatol 28(6) 697∼703, 2016)
Bunjhoo, Hansvin,Wang, Zheng-Yun,Chen, Hui-Long,Cheng, Sheng,Xiong, Wei-Ning,Xu, Yong-Jian,Cao, Yong Asian Pacific Journal of Cancer Prevention 2012 Asian Pacific journal of cancer prevention Vol.13 No.7
The aim of this study was to evaluate the diagnostic value of interleukin 21(IL-21) and carcinoembryonic antigen (CEA) in tuberculous pleural effusions (TPEs) and malignant pleural effusions (MPEs). Pleural effusion samples from 103 patients were classified on the basis of diagnosis as TPE (n=51) and MPE (n=52). The concentration of IL-21 was determined by ELISA. Lactate dehydrogenase (LDH), adenosine dehydrogenase (ADA) and CEA levels were also determined in all patients. A significant difference was observed in the levels of ADA and CEA (P<0.01), but not in the levels of LDH (P>0.05) between TPE and MPE. The concentration of IL-21 in MPE was significantly higher compared to TPE (P<0.01). With a threshold value of 4.32 pg/ml, IL-21 had a sensitivity of 76.9% (40/52) and a specificity of 80.4% (41/51). Combined detection of IL-21 and CEA had a sensitivity of 69.2% (36/52) and a specificity of 92.2% (47/51). These two markers can contribute to the differential diagnosis of MPEs.
Modeling and Simulation of the Magnetic Method for High Voltage Direct Current Inspection Robot
Xian-jin Xu,Cheng-hui Liu,Yu Yan,Hao-da Chen,Lei Fang,Yun-long Wang,Long-hui Wu 한국자기학회 2018 Journal of Magnetics Vol.23 No.3
In order to solve the slipping problem of a two-arm-wheel combined inspection robot, a maglev system based on the magnetic field of a high voltage direct current (HVDC) is proposed. The magnetic system comprises of two parts: a magnetic levitation system and a magnetic drive system. The levitation component overcomes the gravity of the robot by the Ampere force generated by current-carrying coils in the magnetic field of HVDC. The drive component utilizes the Ampere force generated by current-carrying coils in the magnetic field of HVDC as the driving force. Simulation results of the model are compared with the calculated values. The results show that the magnetic levitation method and the magnetic drive method are theoretically feasible, and the model is accurate and effective, which is of great practical significance to the physical realization of the inspection robot.
Lee, Hong-Gu,Yin, Jin-Long,Xu, Cheng-Xiong,Hong, Zhong-Shan,Lee, Zhe-Hu,Jin, Yong-Cheng,Choi, Chang-Weon,Lee, Do-Hyeung,Kim, Kyoung-Hoon,Choi, Yun-Jaie Asian Australasian Association of Animal Productio 2011 Animal Bioscience Vol.24 No.12
This study was conducted to examine the effects of glucose, chromium picolinate (CrP), and vitamin C (Vit C) on lipid metabolism in Korean native steers fitted with indwelling catheters. A total of 12 Korean native steers were randomly allocated to the following treatments: 1) normal control diet, 2) same as 1) +250 g of glucose by intravenous (IV) infusion, 3) same as 2)+13.5 g CrP administered orally, and 4) same as 3)+2.52 g Vit C by IV infusion. Glucose, Vit C, and CrP treatments were administered for five days. At days 1 and 3, serum insulin was higher in treated animals than in those fed the control diet (p<0.05). Serum non-esterified fatty acid (NEFA) concentration in the steers on treatment 2), control+13.5 g CrP, was lower than those on other treatments at 90 min post-infusion on days 1 and 3 (p<0.05). The expression of peroxisome proliferator-activated receptor-${\gamma}$ (PPAR${\gamma}$)2, stearoyl-CoA desaturase-1 (SCD), fatty acid synthase (FAS), and glucose transporter type 4 (Glut 4) in the longissimus muscle of steers on treatment 2 was higher than those on other treatments. In conclusion, the results suggest that CrP is associated with the regulation of gene expression involved in adipogenesis.
Effects of Ohmic Area Etching on Buffer Breakdown Voltage of AlGaN/GaN HEMT
Chong Wang,Xiao-Xiao Wel,Meng-Di Zhao,Yun-Long He,Xue-Feng Zheng,Wei Mao,Xiao-Hua Ma,Jin-Cheng Zhang,Yue Hao 한국전기전자재료학회 2017 Transactions on Electrical and Electronic Material Vol.18 No.3
This study is on how ohmic area etching affects the buffer breakdown voltage of AlGaN/GaN HEMT. The surfacemorphology of the ohmic metal can be improved by whole etching on the ohmic area. The buffer breakdown voltagesof the samples with whole etching on the ohmic area were improved by the suppression of the metal spikes formedunder the ohmic contact regions during high-temperature annealing. The samples with selective etching on theohmic area were investigated for comparison. In addition, the buffer leakage currents were measured on the differentradii of the wafer, and the uniformity of the buffer leakage currents on the wafer were investigated by PL mappingmeasurement.