Accuracy of cardiac output measurements during off-pump coronary artery bypass grafting: according to the vessel anastomosis sites

Sung Yong Park,Dae Hee Kim,Han Bum Joe,Ji Young Yoo,Jin Soo Kim,Min Kang,Yong Woo Hong 대한마취통증의학회 2012 Korean Journal of Anesthesiology Vol.62 No.5

Background: During beating heart surgery, the accuracy of cardiac output (CO) measurement techniques may be influenced by several factors. This study was conducted to analyze the clinical agreement among stat CO mode (SCO), continuous CO mode (CCO), arterial pressure waveform-based CO estimation (APCO), and transesophageal Doppler ultrasound technique (UCCO) according to the vessel anastomosis sites. Methods: This study was prospectively performed in 25 patients who would be undergoing elective OPCAB. Hemodynamic variables were recorded at the following time points: during left anterior descending (LAD) anastomosis at 1 min and 5 min; during obtuse marginal (OM) anastomosis at 1 min and 5 min: and during right coronary artery (RCA) anastomosis at 1 min and 5 min. The variables measured including the SCO, CCO, APCO, and UCCO. Results: CO measurement techniques showed different correlations according to vessel anastomosis site. However, the percent error observed was higher than the value of 30% postulated by the criteria of Critchley and Critchley during all study periods for all CO measurement techniques. Conclusions: In the beating heart procedure, SCO, CCO and APCO showed different correlations according to the vessel anastomosis sites and did not agree with UCCO. CO values from the various measurement techniques should be interpreted with caution during OPCAB. Background: During beating heart surgery, the accuracy of cardiac output (CO) measurement techniques may be influenced by several factors. This study was conducted to analyze the clinical agreement among stat CO mode (SCO), continuous CO mode (CCO), arterial pressure waveform-based CO estimation (APCO), and transesophageal Doppler ultrasound technique (UCCO) according to the vessel anastomosis sites. Methods: This study was prospectively performed in 25 patients who would be undergoing elective OPCAB. Hemodynamic variables were recorded at the following time points: during left anterior descending (LAD) anastomosis at 1 min and 5 min; during obtuse marginal (OM) anastomosis at 1 min and 5 min: and during right coronary artery (RCA) anastomosis at 1 min and 5 min. The variables measured including the SCO, CCO, APCO, and UCCO. Results: CO measurement techniques showed different correlations according to vessel anastomosis site. However, the percent error observed was higher than the value of 30% postulated by the criteria of Critchley and Critchley during all study periods for all CO measurement techniques. Conclusions: In the beating heart procedure, SCO, CCO and APCO showed different correlations according to the vessel anastomosis sites and did not agree with UCCO. CO values from the various measurement techniques should be interpreted with caution during OPCAB.

IGCC용 고온건식 탈화제의 반응속도 모사에 관한 연구

박소진,이영우,민세홍,나재익,위영호 忠南大學校 産業技術硏究所 1999 산업기술연구논문집 Vol.14 No.1

고온건식 탈황공정에서 탈황제의 황화, 재생 반응은 비촉매 기고 반응이다. 이러한 비촉매 기고 반응의 수학적 모사는 실험데이터의 설명, 공정의 설계 그리고 scale-up에 있어서 매우 중요한 정보가 된다. 탈황제의 황화, 재생 반응에는 spray dryer로 제조된 zinc titanate 탈황제를 사용하였고, 변형된 미반응핵 모델식에 적용하여 각 반응의 반응속도를 해석한 결과 탈황제의 황화반응에는 화학반응 저항과 고체 상태의 확산 저항이 회합하여 전체반응속도를 지배하며, 이때 반응속도상수는 367.67cm/min 이었고 고체상태의 확산계수는 29.66cm²/min이었다. 또한 재생반응시에 는 화학반응 저항만이 전체반응의 저항으로 관여하며, 이때의 반응속도상수는 3.45x10e cm/min이었다. In the dry-type high temprature gas desulfurization process, sulfidation and regeneration reactions of desulfrrization sorbents are noncatalytic gas-solid reactions. The mathematical modeling of noncatalytic gas-solid reactions is improtant in order to interpret laboratory data and in design and scale-up. Zinc titanate sorbent to manufacture by spray dryer is used in sulfidation and regeneration reactions of desulfuization sorbents. The result which analyzes reaction rate of sulfidation reaction by applying each reactions to modified unreacted core model is that the global reaction rate is controlled by associating with chemical reaction resistance and solid state diffusion resistance. In this case,reaction rate constant is367.67e cm/min and solid state diffusion coefficient is 29.66e cm²/min Also gloval reaction rate of regeneration reaction is controlled only by chemical reaction resistance. In this case, reaction rate constant is 3.45x10e cm/min.

유아의 성별, 연령에 따른 체력 특성

전영남,양점홍,김수진,이성민 釜山大學校 附設 體育科學硏究所 2005 體育科學硏究所 論文集 Vol.21 No.2

The purpose of this study is to examine the characteristics of young children's fitness development in accordance with gheir gender and age, providing information necessary for an effective physical education instruction for young children's growth and development. For the purpose, this researcher selected total 257 young children from K Kindergarten located at K-gu in B Metropolitan City who consisted of 73 boys and 45 girls, both of were fully aged 4, and 83 boys and 56 girls, fully aged 5.......

Direct Deposition of CeO2 Films on Ni Metal Substrate by Chemical Vapor Deposition

Hong, Gye Won,Lee, Young Min,Lee, Hee Gyoun,Jung, Choong Hwan 대한금속재료학회(대한금속학회) 2000 METALS AND MATERIALS International Vol.6 No.3

Cerium dioxide thin films have been grown in-situ directly on cube textured Ni substrate by metal-organic chemical vapor deposition (MOCVD). At a lower deposition temperature of 400℃, an amorphous film was formed. The texture of crystalline CeO₂ film was changed from (200) orientation to (111) orientation when the deposition temperature was increased from 450℃ to 550℃. The growth rate was ∼40 ㎚/min and the rms surface roughness was 50 ㎚ for the CeO₂ film deposited at 450℃ for 10 min. Surface roughness of the film was increased with the development of (111) orientation. Deposited CeO₂ film showed a mixed texture of (100)$lt;001$gt; and (100)$lt;011$gt; orientation. Depending on the deposition condition, the transition from (100)$lt;001$gt; texture to (100)$lt;011$gt; orientation was observed.

Decoding the Modern Fantasy of `White People, Korean` : An Analysis of Images from `the King Young-jo & Jung-jo` to `the open port era`

Min, Soo hong,Kwon, Young Gull 한국색채학회 2006 한국색채학회 학술대회 Vol.2006 No.1

서울의 PPNG 발생 빈도(1991-1992)

김재홍,윤기범,박평원,김영진,전경민,김영태,김중환,곽호,구상완,송민석,유옥,지혜구,김동원,문상은,박영립,정승호,성범진,성순제,엄주용,황정열,이기홍,이주협,전태진 대한화학요법학회 1994 대한화학요법학회지 Vol.12 No.1

The prevalence of PPNG among pretreated gonorrhea cases isolated at the STD clinic of Choong-Ku Public Health Center in Seoul has been studied and reported annually since 1981. In 1991, 123 strains of N.gonorrhoeae were isolated, among which 58(47.1%) were PPNG. In 1992, 98 starains of N.gonorrhoeae were isolated, among which 51(52.0%) were PPNG. In all, 109(49.3%) strains were found to be PPNG among 221 strains isolated between 1991-1992. The prevalence of PPNG in Seoul showed increased tendency till 1989, thereafter, it has been stationary or slightly decreasing.

벤조디아제핀 수용체 영상용 양전자 방출 핵종 표지 플루마제닐 유도체 [F-18](3-(2-Fluoro)flumazenil의 합성과 생체 내 분포

장영수,이숙자,강삼식,홍성현,이명철,이동수,정준기,정재민,조정혁 대한핵의학회 1999 핵의학 분자영상 Vol.33 No.6

Purpose: Radiotracers that bind to the central benzodiazepine receptor are useful for the investigation of various neurological and psychiatric diseases. [C-11]Flumazenil, a benzodiazepine antagonist, is the most widely used radioligand for central benzodiazepine receptor imaging by PET. We synthesized 3-(2-[F- 18]fluoro)flumazenil, a new fluorine-18 (t1/2=110 min) labeled analogue of benzodiazepine receptor imaging agent, and evaluated in vivo for biodistribution in mice. Materials and Methods: Flumazenil (Ro 15-1788) was synthesized by a modification of the reported method. Precursor of 3-(2-[F-18]fluoro)flumazenil, the tosylated flumazenil derivative was prepared by the tosylation of the ethyl ester by ditosylethane. [F-18] labeling of tosyl substitued flumazenil precursor was performed by adding F-18 ion at 85℃ in the hot cell for 20 min. The reaction mixture was trapped by C18 cartridge, washed with 10% ethanol, and eluted by 40% ethanol. Bidistribution in mice was determined after intravenous injection Results: The total chemical yield of tosylated flumazenil derivative was ∼40%. The efficiency of labeling 3-(2-[F-18]fluoro)flumazenil was 66% with a total synthesis time of 50 min. Brain uptakes of 3-(2-[F-18]fluoro)flumazenil at 10, 30, 60 min after injection, were 2.5±0.37, 2.2±0.26, 2.1±0.11 and blood activities were 3.7±0.43, 3.3±0.07, 3.3±0.09%ID/g, respectively. Conclusion: We synthesized a tosylated flumazenil derivative which was successfully labeled with no-carrier-added F-18 by nucleophilic substitution.

Ether-free polymeric anion exchange materials with extremely low vanadium ion permeability and outstanding cell performance for vanadium redox flow battery (VRFB) application

Cha, Min Suc,Jo, Sang Woo,Han, Seung Hui,Hong, Soo Hyun,So, Soonyong,Kim, Tae-Ho,Oh, Seong-Geun,Hong, Young Taik,Lee, Jang Yong Elsevier 2019 Journal of Power Sources Vol.413 No.-

<P><B>Abstract</B></P> <P>Ether-free poly(<I>p</I>-phenylene)-based anion exchange membrane materials with outstanding vanadium ion blocking properties are reported. The synthesized ionomers with a rigid backbone structure show small dimensional variations despite the high ion exchange capacities. Among the synthesized membranes, the QPPP-2 membrane with ion exchange capacity of 2.1 meq·g<SUP>−1</SUP> exhibits high anion (OH<SUP>−</SUP>, SO<SUB>4</SUB> <SUP>2−</SUP>, and Cl<SUP>−</SUP>) conductivity. The QPPP-2 membrane shows an extremely low diffusion coefficient (2.12 × 10<SUP>−9</SUP> cm<SUP>2</SUP> min<SUP>−1</SUP>) for VO<SUP>2+</SUP>, which is much lower than that of Nafion 115 (2.88 × 10<SUP>−6</SUP> cm<SUP>2</SUP> min<SUP>−1</SUP>), indicating the vanadium ion blocking property of QPPP-2. Moreover, the chemical and operational stabilities of the membranes are investigated <I>via</I> ex situ soaking tests in 0.1 M VO<SUB>2</SUB> <SUP>+</SUP> solution and in situ operation tests for 100 cycles, respectively. The vanadium redox flow battery single cell assembled with the QPPP-2 membrane exhibits a coulombic efficiency of 99%, voltage efficiency of 87%, and energy efficiency of 86% during 100 cycles at 80 mA cm<SUP>−2</SUP>. The excellent chemical, morphological, and electrochemical properties of the QPPP-2 membrane make it suitable for use in vanadium redox flow battery.</P> <P><B>Highlights</B></P> <P> <UL> <LI> AEMs are fabricated by a Ni(0)-catalyzed cross-coupling reaction. </LI> <LI> The synthesized ionomers indicated excellent dimensional and chemical stability. </LI> <LI> Ether-free polymeric AEMs showed extremely low vanadium ion cross over. </LI> <LI> The performance of developed AEM showed high EE (87%) with high capacity retention. </LI> </UL> </P> <P><B>Graphical abstract</B></P> <P>[DISPLAY OMISSION]</P>

진공열간가압성형 (VHP) 법 및 압출로 제조한 SiCp/Al 및 SiCp/2024Al 복합재료의 동적탄성계수와 감쇄능 (내부마찰) : 금속기 복합재료의 동적탄성계수 및 감쇄능 측정

김영만,조기현,이경민,홍성길 대한금속재료학회(대한금속학회) 1999 대한금속·재료학회지 Vol.37 No.9

To shorten the processes of MMC fabrication, a number of techniques are being studied. In this study, a new process for MMC's fabrication was developed utilizing vacuum hot pressing and subsequent extrusion. MMC's with pure Al and 2024Al matrices reinforced with various volume fractions of SiC particulates were produced at 400℃ by vacuum hot pressing(VHP), followed by direct extrusion with extrusion ratios of 10:1 at 480℃ at constant ram speed of 2㎜/sec. The effects of extrusion pressure and relative density according to the volume fractions of the reinforcement were compared with the resultant metallurgical microstructures. Young's moduli of the manufactured composites were measured by the sonic resonance method, damping capacity by free decay method. Measured Young's moduli of the composites at room temperature were compared with the predictions based on Rule of Mixtures, Halpin-Tsai and Mean-field models. Measured Young's moduli of the composites are in good agreement with the predictions based on Mean-field model. The composites reinforced with finer particles showed higher damping capacity under the same amount of SiC reinforcement.

디지털 음악 및 아날로그 음악이 악력에 미치는 영향 평가

최민지 ( Min Ji Choi ),홍지혜 ( Ji Hye Hong ),송영웅 ( Young Woong Song ) 대구가톨릭대학교 자연과학연구소 2011 자연과학연구논문집 Vol.9 No.1

This study evaluated the effect of the music type (analog and digital) on the grip strength. Five male and five female healthy college students participated in the experiment. The independent variables were music type (analog, digital, no music) and listening time (5 min., 10 min., and 15 min.). The classic LP disc was used as the analog music and the LP was converted to mp3 to make the digital music source. Grip forces were measured every 5 minutes until 15 minutes using Jamar strain guqge. Mean forces and peak forces were used as dependent variables. The analysis of variance showed that there was no difference between analog and digital music (p>0.05). Only, the gender effect was statistically significant (p<0.05). These results should be verified using different types of music (not only classical music) or preferred music, during different listening time duration (>15 minutes).