Liquid crystal display panel fabricated in dual mode

Yaping Wang,Aiping Mo,Qingfeng Jiang 한국정보디스플레이학회 2012 Journal of information display Vol.13 No.1

The current panels for liquid crystal display (LCD) TV sets are all characterized by pins placed on two sides. To manufacture one type of panel, a dedicated mask is needed, and the production line should be started once. Moreover, the whole panel needs to be removed if a dead pixel is found. If the panel, however, will first be fabricated with pins placed on four sides and then divided by a cross-cut into four equal-sized panels with pins placed on two sides, one set of masks can be used to manufacture two types of LCD panels, which was referred to by the authors as dual mode. In this paper, the concept of the dual mode and its differences from the conventional way of producing panels are introduced. Its advantages in boosting production efficiency, improving the product’s good rate, and lowering the production cost are also described based on case studies. Of particular importance is the fact that the dual mode is very suitable for the trial production of very-large-area LCD TV sets.

Does incubation matter when copying equity funds in China?

Yaping Wang,Miyoun Paek,Kwangsoo Ko 한국재무학회 2014 한국재무학회 학술대회 Vol.2014 No.11

This study investigates the impact of incubation on the effectiveness of copycat funds in the largest emerging market, China. The empirical findings are as follows. First, unlike the U.S., the overall findings exclude the possibility of successfully copying equity funds in China. Second, an advisory company’s fund incubation makes it harder to free-ride on new funds than old funds. Third, incubation is generally undertaken for new funds in a bullish market so that copycat returns of new-minus-old funds have a negative correlation with market returns. Fourth, the effect of long Chinese Lunar Year holiday impairs the performance of primitive funds, consequently, copying is effective in January and February. Finally, logit analysis shows that copying is successful for those funds with low performance and low turnover ratios.

The Tourism Demand of Nonlinear Combination Forecasting based on Time Series Method and WNN

Yaping Wang 보안공학연구지원센터 2015 International Journal of u- and e- Service, Scienc Vol.8 No.3

The combination forecasting model IOWGA-EMD-ARMA-WNN is proposed in this paper. The randomness, periodicity and tendency of the original data are showed by EMD decomposition in EMD-ARMA model. WNN combines the advantages of wavelet analysis and BP neural network and improves the learning efficiency and forecasting accuracy. The weight of combination model is decided by forecasting precision of EMD-ARMA model and WNN model based on IOWGA method. At last, the IOWGA-EMD-ARMA-WNN model is used to forecast monthly inboard tourism demand of China and the results show that the proposed combination model has better performance on forecasting accuracy compared with the other models.

Prediction of rolling bearing performance degradation based on sae and TCNattention models

Yaping Wang,Dekang Hou,Di Xu,Sheng Zhang,Chaonan Yang 대한기계학회 2023 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.37 No.4

A single feature cannot show the operational state of a bearing during its entire life cycle. Therefore, a rolling bearing performance deterioration prediction method based on an SAE and the TCN-attention model is proposed. The SAE method is used to fuse the timedomain indicator and the frequency-domain indicator to construct the performance degradation characteristic indicator. The evaluation indices are used to comprehensively evaluate multiple performance degradation indices, and the fused feature indices together, to filter out the features that have a good overall performance. Attention is added to the TCN model, and the output state weight of the TCN model is calculated through a scoring function to increase the important information weight and the prediction accuracy. The appropriate network structure and parameter configuration are determined, and the rolling bearing performance degradation prediction model is established. A validation is performed using publicly available datasets from the University of Cincinnati and XJTU-SY. The results show that the method is more sensitive to the critical information part of the long time series than the other models. At the same time, the average absolute error and the root mean square error are minimized, the accuracy of the rolling bearing performance degradation prediction is high, and the model has a strong robustness and generalization abilities. Additionally, the model has practical engineering value for predicting the health status of equipment.

Liquid crystal display panel fabricated in dual mode

Wang, Yaping,Mo, Aiping,Jiang, Qingfeng The Korean Infomation Display Society 2012 Journal of information display Vol.13 No.1

The current panels for liquid crystal display (LCD) TV sets are all characterized by pins placed on two sides. To manufacture one type of panel, a dedicated mask is needed, and the production line should be started once. Moreover, the whole panel needs to be removed if a dead pixel is found. If the panel, however, will first be fabricated with pins placed on four sides and then divided by a cross-cut into four equal-sized panels with pins placed on two sides, one set of masks can be used to manufacture two types of LCD panels, which was referred to by the authors as dual mode. In this paper, the concept of the dual mode and its differences from the conventional way of producing panels are introduced. Its advantages in boosting production efficiency, improving the product's good rate, and lowering the production cost are also described based on case studies. Of particular importance is the fact that the dual mode is very suitable for the trial production of very-large-area LCD TV sets.

The Numerical Simulation Analysis of Flow Field in Level Control Valve of Water Storage Tank

Yaping Wang,Lei Gao,Jianghua Ge,Han Gao,Jing Zhang 보안공학연구지원센터 2014 International Journal of Control and Automation Vol.7 No.10

Level control valve of water storage tank is installed in the outlet of tank, which control the water level of water storage tank by adjusting the water emissions, which make great significance for the safe operation of the super (super) criticality thermal power unit boiler . Complete the simulation analysis of internal flow field by the method of numerical simulation ,in order to achieve structure improvements of level control valve of water storage tank, that make level control valve of water storage tank better meet the work requirements. Establish flow channel model and mesh models of level control valve of water storage tank in various stages of the open process. Make three dimensional viscous numerical simulation of the internal complex flow field by the computational fluid dynamics software of ANSYS CFX. The error between the simulation values of the flow coefficient and the theoretical values , trial values is less than 5% ,which verifies the correctness of the simulation results . Get pressure contour , velocity streamline diagrams and outlet mass flow of level control valve of water storage tank in various stages of the open process. According to the pressure contours and velocity streamline diagrams, make detailed analysis of the flow field of level control valve of water storage tank. According to the dates of outlet mass flow, fit the flow characteristic curve of level control valve of water storage tank. Provide a theoretical basis for the structural design of level control valve of water storage tank.

Job Search Activity of Unemployed Married Men and Women in Canada

Yaping Zhou(Yaping Zhou),Yixuan Wang(Yixuan Wang) 한국캐나다학회 2011 Asia-Pacific Journal of Canadian Studies (APJCS) Vol.17 No.1

Cyclical bust and boom and the resulting economic restructuring result in some workers being forced out of work. Based on the controversy over the presence or absence of gender differences in coping responses to unemployment that differ in unequal expectations of sex roles and sexual division of labor among the unemployed married individuals, this paper, using the 2008 Labor Force Survey conducted by Statistics Canada, explores whether there are gender-based differences in job seeking, one of the most important strategies for coping responses to unemployment. The finding shows that women value their employment as much as men and make similar efforts to re-enter the labor market when unemployed.

Nitro-oleic Acid Decreases Transcription of the Angiotensin II Type I Receptor Gene in Aortic Smooth Muscle Cells

Huan Wang,Hongsheng Ouyang,Yaping Tian,Zhuang Liu,Xiaolei Han,Xingxing Liu,Guangyao Ran,Gangqi Wang,Daxin Pang,Xiaochun Tang 한국생물공학회 2014 Biotechnology and Bioprocess Engineering Vol.19 No.4

Nitroalkene derivatives of nitro-oleic acid(OA-NO2) regulate pluripotent cell signaling in vivo underphysiological and pathological conditions. Angiotensin IItype 1 receptor (AT1R) plays an important role in thecardiovascular system. In this study, OA-NO2 reduced theAT1R mRNA level, specifically in primary smooth musclecells, showing a 70% reduction in rat smooth muscle cells(RASMCs) and a 50% reduction in pig smooth musclecells (PASMCs). These effects were not observed in CHOcells, which highly express AT1R. The AT1R mRNA decayrate was unchanged after OA-NO2 compared with OAtreatment. Nitric oxide (NO) and peroxisome proliferatoractivatedreceptor gamma (PPARγ) did not alter thereduced effects of OA-NO2 on the AT1R mRNA level inSMCs. However, Sp1-mediated activation of the AT1Rpromoter was reduced in response to OA-NO2 in RASMCsbut not 293T cells. In addition, the nuclear factor-kappa B(NF-κB) pathway was involved in the OA-NO2-mediateddownregulation of AT1R transcription in SMCs. Takentogether, our results demonstrate that OA-NO2 specificallyinhibits AT1R mRNA expression in primary smooth musclecells via the NF-κB pathway.

Improved Particle Swarm Optimization Algorithm for Optimization of Power Communication Network

Yuhuai Wang,Qihui Wang,Huixi Zhang,Kang An,Xia Ye,Yaping Sun 보안공학연구지원센터 2016 International Journal of Grid and Distributed Comp Vol.9 No.1

Based on particle swarm optimization (PSO) algorithm and its power system reactive power optimization method to in-depth study and research proposed a new hybrid particle swarm optimization algorithm (HPSO). Algorithm combines the differential evolution algorithm and simulated annealing algorithm and particle swarm optimization algorithm, in particle searching optimal except for tracking individual and global, and tracks produced by particle information difference of the three value. At the same time, when the particle search space of one dimension speed lower than the setting value will be re initialized the dimensional particle velocity and the particle of differential evolution mutation. For the crossover and mutation operations, new solution may be worse than the original solution to, the introduction of simulated annealing algorithm, the metropolis rule in a certain extent accept bad solutions, allows the target function in a certain degree of deterioration, practical calculation is not according to the probability to choose the poor solution, but rather the judgment target function difference is less than allows the target function deterioration range. Hybrid particle swarm optimization algorithm combines the advantages of particle swarm optimization algorithm, differential evolution algorithm and simulated annealing algorithm, to maintain the diversity of particles, has very strong practicability.

Numerical analysis of the formation mechanism and suppression method of the reverse flow in a semi-open centrifugal pump

Like Wang,Jinling Lu,Weili Liao,Wei Wang,Jianjun Feng,Yaping Zhao 대한기계학회 2020 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.34 No.9

Reverse flow has a detrimental effect on the stable and safe operation of centrifugal pumps. To study the formation mechanism and suppression of the reverse flow, a semi-open centrifugal pump with circumferential groove in the shroud was simulated. Then, the flow field and pressure fluctuation were analysed. The absolute flow angle at the blade inlet nearing the shroud was close to 180° because of the joint action of the leakage flow and blade inlet impact under low flow rate. This phenomenon resulted in the formation of a low-speed region and the reverse flow and low-frequency pressure fluctuation. The circumferential groove provided a channel for the leakage flow, which could quickly pass through the groove, and reduced the absolute flow angle at the blade inlet nearing the shroud and weakened the trend of the tip leakage flow to upstream. The low-frequency pressure pulsation was eliminated, and the amplitude of the blade passing frequency was reduced under 0.7 Q d (Q d is the design flow rate). The reverse flow thickness coefficient became zero with the circumferential groove. The proportion of the reverse flow volume to the volume of inlet pipe decreased from 14.7 % to 2.2 % under 0.4 Q d . This research indicated that the circumferential groove arranged in the shroud could effectively suppress or eliminate reverse flow.