한국에서의 간질의 사회적 낙인

이상암,유희정,허경,박형국,신동진,송홍기,정원영,권오영,이성수,김요식,김성은,이병인 대한간질학회 2002 대한간질학회지 Vol.6 No.2

비만세포주에서 Histamine 유리에 관한 연구

김형룡,국윤아,신민,이홍수,원진숙,김형민,이영미,정헌택,이혜숙,안녕형 원광대학교 생명공학연구소 1995 생명공학연구소보 Vol.3 No.1

림프종 환자에서의 갈륨, TI-201 그리고 Tc-99m MIBI 섭취의 비교

천경아,조인호,원규장,이경희,이형우,현명수,이재태,이규보 영남대학교 의과대학 2002 Yeungnam University Journal of Medicine Vol.19 No.2

Purpose; Ga-67 scintigraphy has been used for the evaluation of tumors, especially lymphoma. Recently, Tl-201 and Tc-99m MIBI were also used to tumor imaging. Tl-201 and Tc-99m MIBI had better physiologic characteristics than Ga-67, so we studied 32 biopsy proven lymphoma patients (male 24, female 8, mean age 46 years) with Ga-67, Tl-201 or Tc-99m MIBI and compared the scan findings. Materials and Methods: Twenty-three of 32 patients were injected 74-111 MBq (2-3 mCi) of Tl-201, before chemotherapy and imaged with dual-headed SPECT (Prism 2000, Picker, USA) at 30 minutes after injection. Delayed images were obtained after 3 hr in 8 patients. Twenty seven of 32 patients were injected 740 MBq (20 mCi) of Tc-99m MIBI and imaged at 30 minutes after injection. 111-185 MBq (3-5 mCi) of Ga-67 was injected in 12 patients and imaged at 48 and 72 hours after injection. Twenty eight patients were diagnosed as non-Hodgkin's lymphoma and others were Hodgkin's lymphoma. Results: Twenty patients were positive on Tl-201 scan and 3 patients showed negative findings. One of these 3 patients, Tc-99m MIBI and Ga-67 scan were positive. Twenty two patients were positive on Tc-99m MIBI scan and 5 patients showed negative findings. One of these 5 patients, Tl-201 was positive and 2 were positive on Ga-67 scan. Ten of 12 patients showed positive findings on Ga-67 scan. The sensitivity of these agents were 83.3%, 87.0% and 81.5% for Ga-67, Tl-201 and Tc-99m MIBI, respectively. The sensitivity was highest in Tl-201 scan, but there were no significant differences among three tests. In this study, there was no significant difference of uptake ratios between early and delayed images of Tl-201. Conclusion: Scintigraphy with Tl-201 and Tc-99m MIBI in lymphoma patients have similar sensitivity with Ga-67.

2010 파주, 안산지역 갈대, 억새 등 야초류의 이용실태와 사료가치 평가

서성(Sung Seo),김원호(Won Ho Kim),정민웅(Min Woong Jung),박형수(Hyung Soo Park),심재진(Jae Jin Shim),박진길(Jin Gil Park),성하균(Ha Guyn Sung),김종덕(Jong Duk Kim),이종경(Joung Kyong Lee) 한국초지조사료학회 2011 한국초지조사료학회지 Vol.31 No.2

본 연구는 부존 조사료자원의 이용을 활성화하여 수입사료를 줄이고 가축 사료비를 절감하고자 2010년도에 경기 파주 (민통선 지역)와 경기 안산 (시화지구)에서 갈대와 억새 등 야초자생지를 탐색하고, 수확?이용실태 조사와 함께 사료가치를 분석하였다. 파주 민통선 내억새 (Miscanthus sinensis)와 갈대 (Phragmites communis) 혼합 자생지는 90~100 ㏊ 규모로, 1차 곤포작업으로 사일리지 520톤 (㏊당 6톤), 2차로 380톤 (㏊당 4톤)을 조제하여, 연 사일리지 900톤 (㏊당 10톤)을 생산하였다. 곤포의 유통가격은 롤당 52~55천 원으로 ㎏당 130~137.5원이었다. 곤포는 자가소비 50~70%, 판매유통 30~50%로, 수익성은 인건비 정도로 추정되었다. 초장 70 ㎝의 재생 억새는 조단백질 9.6%, 상대사료가치 82.4 (건초 4등급), 건물 소화율 67.7%, 초장 70 ㎝의 재생 갈대는 각각 13.8%, 84.3 (4등급), 67.9%로 사료가치는 높았으며, 수확이 늦어짐에 따라 사료가치는 크게 낮아졌다. 안산 시화지구 (3공구)의 갈대 등 야초류자생지는 100 ㏊ 정도로 2009년도에는 50 ㏊에서 사일리지 550톤 (㏊당 11톤)을 생산하여 롤당 50천 원에 유통하였으며, 2010년도는 잦은 강우와 장마로 부분 이용에 그쳤다. 고초기의 갈대는 건물률 89.8%, 조단백질 2.2%, NDF 80.6%, ADF 55.4%, 상대사료가치 52.9 (5등급), 건물 소화율 36.4%로 볏짚에 비해서도 사료가치는 크게 낮았다. 초장 80 ㎝의 재생 갈대는 조단백질 12.9%, 상대사료가치 99.8 (3등급), 건물 소화율 66.6%로 사료가치는 양호하였으며, 개화기의 초장 150 ㎝ 갈대는 조단백질 4.5%, 상대사료가치 59.9 (5등급), 건물 소화율 42.2%로 볏짚의 사료가치와 비슷하였다. 이상의 결과를 종합하여볼 때, 갈대, 억새 등 야초류는 현 상태에서 최대한 수거?이용하되, 사료가치를 유지하고 가축 기호성을 고려한 시기에 수확하는 것이 중요하며, 최소한 볏짚과 비슷하거나 그 이상의 사료가치를 기대하기 위해서는 7월 중순 이전 (늦어도 7월까지)에 수확?이용하는 것이 권장된다. 본 연구에서 조사된 대부분의 야초류는 상대사료가치가 75 이하인 건초 5등급으로 사료가치는 매우 낮았으며, 키가 작은 영양생장기에 수확한 경우에만 4등급으로 나타났다. 부존 조사료자원의 이용은 양질의 사료작물 생산과 병행하여 추진하는 것이 바람직하였다. This study was carried out in 2010 to investigate the utilization and nutritive value of native grasses, such as Phragmites communis and Miscanthus sinensis which might reduce the cost of feeding domestic cattle. The regions within the Civilian Control Line in Paju and Sihwa region in Ansan were surveyed. In Paju, the yearly silage production was 900 MT harvested from 90 ha (10 MT/㏊). About 30~50% of these were sold out at the marketing price of 52,000~55,000 Won per roll (130~137.5 Won/㎏). Regrown Miscanthus sinensis of 70 ㎝ in length contained 9.6% of crude protein (CP), 82.4 of relative feed value (RFV), and 67.7% of in vitro dry matter digestibility (IVDMD). Regrown Phragmites communis of 70 ㎝ in length contained 13.8% of CP, 84.3 of RFV, and 67.9% of IVDMD. As harvesting was delayed, the quality was decreased dramatically. In Ansan region, Phragmites communis plantation covers 100 ha. The silage production was 550 MT from the area of 50 ha (11 MT/㏊) in 2009. And the marketing price was 50,000 Won per roll. But in 2010 only a small amount of grasses could have been baled due to frequent and much rainfall from spring to summer season. However, the good forage quality was observed from regrown Phragmites communis of 80 ㎝ in length, 12.9% CP, 99.8 RFV and 66.6% IVDMD, while that of late matured grasses was very low, 2.2% CP, 52.9 RFV and 36.4% IVDMD, greatly lower than forage quality of rice straw. The quality of grasses at bloom stage of 150 ㎝ in length was similar to that of rice straw, showing 4.5% CP, 59.9 RFV and 42.2% IVDMD. In conclusion, the overall quality of most native grasses in this survey were very poor. Therefore, we recommend that Phragmites communis and Miscanthus sinensis should be harvested during June or July to obtain better forage quality which is richer in forage values than rice straw. Production of high quality forage crops was also desirable for self sufficiency of forage.

응급실로 내원한 장중첩증의증 환아의 진단방법에 대한 임상적 고찰

원형섭,박정배,표창해,김형수,박철완,이근 대한응급의학회 1995 대한응급의학회지 Vol.6 No.2

The purpose of this study is to evaluate the appropriate diagnostic methods for the patients with suspected intussusception. Intrssusception is a state that a portion of alimentary tract is telescoped into a segment just caudad to it, and has a characteristic symptoms of cyclic irritability, vomiting, bloody stools and palpable mass, It is the most common cause of acute or acquired intestinal obstruction in infants and children, and needs early diagnosis and immediate treatment. Authors reviewed retrospectively medical records of 411 infants & children with suspected intussusception from January 1, 1992 to December 31, 1994 and report the results with literature reviews. The results were as followings; 1) 263 cases were definite intussusception(DI) out of 411 suspected intussusception(SI). 2) The male to female ratio was 2.3 : 1 in SI and 2.8 : 1 in DI. 3) The distribution of age revealed that 85% of SI and 84% of DI were under 24 months old, and the most common age was 8 months in SI and 10 months in DI. 4) There were upper respiratory infection in 84 cases(2)%), gastroenteritis in 32 cases(8%) and bronchiolitis in 8 cases(2%) as preceding diseases. 5) The simple X-ray showed gaseous bowel distension in 212 cases(52%). 6) The most common symptoms and signs were cyclic irritability and abdominal pain(94%), bloody stools(72%), palpable abdominal mass(47%), in order. 7) Of 411 patients, 252 cases(61%) were diagnosed and treated by air enema(228 cases) and/or exploration(24 cases). Among 296 cases(72%) who showed bloody stools in digital rectal examination and glycerin enema, 245 cases(83%) were confirmed as intussusception through air enema and/or operative intervention, and that corresponds to 93% of DI. 8) Intestinal perforation as complication occurred in 3 of 393 cases who underwent air and barium enema, but all of them recovered without any sequelae after operation. Conclusively, it is thought that air enema preceded by digital rectal examination and glycerin enema is safe and useful method in diagnosis and treatment of infants and children with SI.

SHS 화학로에 의한 TiC-B₄C 복합체의 소결특성에 관한 연구

이형복,이재원,박성 明知大學校 産業技術硏究所 1993 産業技術硏究所論文集 Vol.12 No.-

SHS 법에 의하여 TiC를 합성하고 SHS 화학로를 이용하여 B₄C를 합성하여 TiC 기지에 B₄C의 첨가량을 변화시키면서 TiC-B₄C 복합체의 소결특성을 연구하였다. TiC-B₄C 복합체에서 20wt% B₄C를 첨가하였을때 가장 우수한 소결특성을 나타내었으며 1900℃에서 90분간 30MPa의압력으로 고온 가압소결하여 얻어진 소결체의 상대밀도, 꺽임강도, 경도 및 파괴인성은 각각 98.2%, 620MPa, 2412Kg/mm²그리고 ??이었다. TiC and B₄C were prepared from the Mixture of metal titanium, boron and graphite powders in Argon atmosphere by Self-propagating High-temterature Synthesis method and self-propagating High-temterature Synthesis Chemical furnace respectively. The sintered properties of TiC-B₄C composite as a function of B₄C content was investigated in theTiC-B₄C composite. The relative density. M. O. R. strength, Hardness and fractur toughness of TiC-20wt% B₄C composite sintered at 1900˚C for 90min. by hot-pressing under the presure of 30 MPa were 98.2%, 620MPa, 2412kg/mm and ??,respectively.

공침범으로 제조한 마그네시아 부분안정화 지르코니아 소결체의 특성에 미치는 열처리 효과

이재원,오응주,정윤중,이형복 明知大學校 産業技術硏究所 1989 産業技術硏究所論文集 Vol.8 No.-

The powder of ZrO₂-MgO systems prepared by co-precipitation method using ZrOCl₂· 8H₂O and MgCl₂· 6H₂O as the sintering materials. They are sintered and than heat treated to know that effects of agoing time and temperature on mechanical and electrical properties. The powder ZrO₂-MgO systems have∼30nm crystal size and tetragonal phase. The mechanical properties of these partially stabilized ZrO₂- MgO specimens are shown the best value when they are aged at 1,100℃ for 1 hr and at 1,450℃ for 10 hrs, but these are better than those, and while the specimens of 9.5 mole% in these thermal conditions. Electrical conductivities are measured as a function of temperature in the range of 500℃ to 1,000℃. The temperature dependence of electrical doncutivities is shown the activation energies by the heat reat conditions; no heat treating, heat treating at 1,100℃ for 1 hr, and heat treating at 1,450℃ for 10 hrs, and their values are 21.5㎉/㏖, 34.3㎉/㏖, and 43.5㎉/㏖, respectively.

알루미늄 연속주조 용탕의 탈 가스 일체화 장치 개발

이용중,김태원,김기대,류재엽,이형우 한국공작기계학회 2004 한국공작기계학회 추계학술대회논문집 Vol.2004 No.-

It is necessary for managing a perfect process for degasing aluminum molten metal according to the increase of a grade of aluminum and its alloy products. There are some methods that have been used to manage a degasing process in recent years, such as an injection method that uses aluminum molten metal powder and chemicals supplier and input method that supplies argon and nitrogen, or chlorine gas by using a gas blow-tube. However, these methods show some problems, and it shows that it is a difficult process to handle, pollution due to the producing a lot of toxic gases like chlorine and fluoride gas, irregular effects, and lowering work efficiency due to the excessive processing time. The problems that are the most fatal are the producing a lot of sludge due to the reaction of aluminum molten metal with chemicals, loss of metals, and decreasing the life of refractory materials. In order to solve these problems, this paper develops a technology that is related to aluminum continuous casting molten metal and monolithic degasing apparatus. A degasing apparatus developed in this study improved the existing methods and prevented environmental pollution with smokeless, odorless, and harmlessness by using a new method that applies argon and nitrogen gas in which the methods used in the West and Japan are eliminated. The developed method can significantly reduce product faults that are caused by the production of gas and oxidation because it uses a preprocessed molten metal with chemicals. In addition, the amount of the produced sludge can also be reduced by 60~80% maximum compared with the existing methods. Then, it makes it possible to minimize the loss of metals. Moreover, the molten metal processing and settling time is also shortened by comparing it with the existing methods that are applied by using chemicals. In addition, it does much to improve the workers' health, safety and environment because there is no pollution. The improvement of productivity and prevention effects of disaster from the results of the development can be summarized as follows. It will contribute to the process rationalization because it does not have any unnecessary processes that the molten metal will be moved to an agitator by using a ladle and returned to process for degasing like the existing process due to the monolithic configuration. There are no floating impurities due to the oxidation caused by the contact with the air as same as the existing process. In addition, it can protect the blending of precipitation impurities. Because it has a monolithic configuration, it can avoid the use of additional energy to compensate the temperature decreasing about 60? that is caused by the moving of molten metal. It is not necessary to invest an extra facilities in order to discharge the gas generated from a degasing process by using an agitator. The working environment can be improved by the hospitable air in the factory because the molten metal is almost not exposed in the interior of the area.

마그·크로내화물의 고온안정성에 미치는 CaO의 영향

이홍림,이원혁,이형복 연세대학교 산업기술연구소 1983 논문집 Vol.15 No.2

The physical properties of the system MgCr₂O₄-CaO were studied after sintering at 750℃ and 1200℃, respectively, in air for 7 hours. The behavior of varporization for the specimens sintered at 750℃ was studied in H₂ atomosphere. The mechanism of CaCrO₄formation by addition of Cao to MgCr₂O₄ was found to be first order chemical reaction. As CaO contents were increased, the specimens sintered at 750 ℃ expanded by oxidation but the specimens sintered at 1200℃ contracted by formation of eutectic liquid. The vaporization under H₂atomosphere was nearly completed in 1 hour, and as CaO contents were increased, the vaporization rate was also increased.

A1₂O₃/SiC 나노복합체의 소결거동과 기계적 특성에 관한 연구

이재열,이재형,김원병 嶺南大學校 工業技術硏究所 1995 工業技術硏究所論文集 Vol.23 No.1

Al₂O₃/5vol.% SiC nanocomposites have been prepared by pressureless sintering and isostatical hot pressing to investigate sintering behaviors and mechanical properties. Al₂O₃/SiC nanocomposites with high density(more than 99% theoretical density) could be obtained by pressureless sintering and hot isostatical sintering. TEM photographs showed that SiC particles were distributed uniformly in Al₂O₃matrix with typical intra/inter type microstructure. SEM photographs showed that Al₂O₃/SiC nanocoposites had a transgranular fracture mode. Fracture strength have been increased significantly by annealing the composites owing to the surface flaw healing effect and residual compressive stress.