Tool을 이용한 요구 명세서 작성

신재선,이성주 조선대학교 기초과학연구소 1988 自然科學硏究 Vol.11 No.1

Jae Seon Shin Sung Joo Lee This thesis describes an approach to requirements specification in which different aspects of requirements specification are expressed using multiple models. This thesis also describes an interactive software tool named Model-Box, Which supports the construction and analysis of requirements models via textual and graphical representations. Model-Box allows users to define appropriate new models for the aspects they want to describe, without restriction to a single modeling methodology.

Photonic Crystals: Integration of Colloidal Photonic Crystals toward Miniaturized Spectrometers (Adv. Mater. 9/2010)

Kim, Shin-Hyun,Park, Hyo Sung,Choi, Jae Hoon,Shim, Jae Won,Yang, Seung-Man WILEY-VCH Verlag 2010 Advanced materials Vol.22 No.9

<B>Graphic Abstract</B> <P>The cover shows a schematic illustration of patterned colloidal photonic crystals with different bandgap positions. When an unknown light source impinges on the patterned photonic crystals, the light information can be identified from the reflection intensity profile of the constituent photonic crystals. The two optical microscopy images and background image display integrated photonic crystals with 20 different bandgaps spanning the entire visible range, and the SEM image shows the cross-section of the photonic crystal stripes, as reported by Shin-Hyun Kim, Seung-Man Yang, and co-workers on p. 946. <img src='wiley_img_2010/09359648-2010-22-9-ADMA201090022-content.gif' alt='wiley_img_2010/09359648-2010-22-9-ADMA201090022-content'> </P>

복 반사음 합성기에 관한 연구

신재범,이상영,김재수,박성희,임준석 韓國海洋大學校 附設 海洋科學技術硏究所 1992 硏究論文集 Vol.1 No.1

In the active sonar development, the reverberation is one of the major factors to be overcome like the clutter in the rader development. Unfortunately real reverberation data in various cases cannot be achieved so easily as real clutter data can be and there is a trend to build a simulator before a complex sonar system is developed. In the sonar simulator, the synthesized reverberation signal is necessary. In this paper we propose an algorithm to simulate the reverberation for the moving active sonar to use it in a simulator, and show some simulated results.

비대칭 사장교의 정적 및 시공 단계 해석

신재철,남기수,정인수,한성호 충남대학교 산업기술연구소 2001 산업기술연구논문집 Vol.16 No.1

The cable-stayed bridges are composed of cables, towers and girders. when the cable-stayed bridges are loaded, the whole structure display very complex behavior due to excessive cable deflection. Eventhough the material in the members of a cable-stayed bridge structure behaviors in a linear elastic manner. the overall load-displacement relationship for the structure will be nonlinear. The nonlinear behavior is a result of: due to the sag caused by their own dead weight and the nonlinear axial and bending force-deformation relationships for the bend members. In the construction stage analysis, some technical approaches and structure safety are needed to stimulate numerically the complicated changes of structural system during construction. In this study static and construction stage analysis is performed and compared. Static and construction stage analysis on unsymmetric Cable-stayed bridge is performed and linear and nonlinear analysis is performed to evaluate the structure characteristics. After Static analysis of final construction stage was performed, construction stage analysis was performed.

Prednisolone과 Prednisone의 임상약동학적 평가

신재국,윤영란,차인준,이경훈,장인진,신상구,박찬웅 大韓臨床藥理學會 1994 臨床藥理學會誌 Vol.2 No.1

播種期 및 育苗日數가 黃色種 담배의 初期生育 및 收量에 미치는 影響

申周植,盧載榮,裵吉寬,朴相一 충북대학교 엽연초연구소 1984 煙草硏究 Vol.11 No.-

This experiment was carried out to study the influence of different sowing time, seedling age (the degree of delayed setting) and seedlingbed materials on the growth and yield components of flue-cured tobacco. The variety applied was N.C. 2326, was sown on March 1,11,21 and 31. Those plants were transplanted on the seeding bed mixed humus with sand at the ratio of humus 9 : sand 1 and humus 3: sand 7, 25 days after sowing. Seedlings were grown for 40, 50, 60 and 70 days (from sowing to setting) on the seed bed and seedling bed, and set on the pots (1/5,000a) in the vinyl house. The results obtained were as forlows . 1.The amount of growth of seedlings increased by late sowing and delayed setting. 2.Until the time before the maximum growth stage after setting, stem heigth was larger in the plots of late sowing and delayed setting. After the middle part of maximum growth stage, the earner the sewing time was, the more remarkable the influence of seedling age on the stem elongation was and the larder the seedling age was, the more remarkable the influence of sowing time on the stem elongation was. 3.Stem diameter was large in the plot to late sowing until the early part of maximum growth stage but after the middle part of maximum growth stage the diameter was large in the plants sown at March 11 and March 21. 4.The number of leaves per plant increased by late sowing and delayed setting shown significant difference after maximum growth stage. 5.Late setting made the stem height high and number of leaves per plant more. The size of largest leaf was small in the plot of early sowing and large in the plot set after May 10. 6.It takes more days to reach a topping time from sowing and setting in the case of early sowing and early setting. 7.In early sowing plots, the leaf area of lugs and cutlers decreased by younger seedling age, and in late sowing plots, that decreased by older seedling age. The leaf area of leaf and tip at different treatments showed similar results, but in the plots sown at March 11 and 21, largest leaf was shown in the plot of 50- day seedlings. The area of green tip decreased by late seeding and delayed setting. As a result of theses the plant type showed sylindrical in the plot of early sowing and younger seedling age, and cone shape in the plot of late sewing and older seedling age. 8.The earlier the sowing time and the younger the seedling age were, the heavier the weight of unit leaf area of lugs and cutters, but there were little influences of different sowing time and seedling age on the weight of unit leaf area of leaf, tip and green tip. The percentage of dry matter showed similar tendency to the results of weight of unit leaf area. 9.Late sowing (March, 31) decreases the weight of a cured leaf. Weight of cured cutter was largest in the plots sowing March 1 and that of leaf tip and green tip was largest in the plots sowing March 11 and March 21. The weight of cured lugs was largest in 40 and 50-day seedlings, and that of tip and green tip was largest in 50-day seedlings. There were little differences of weight of a cutter and leaf among the treatments of different seedling age. 10.In 40- day seedlings, the area and weight of leaves per plant increased by late sowing, and in 70-day seedlings, those increased by early sowing. In 50 and 60-day seedlings, those were highest in the plots sown at March 11 and March 21. Largest weight and area of leaves per plant was shown in the plot set on May 10, and the plots set on April 10, and June 1 showed significantly low weight of loaves per plant. 11.Late sowing and older seedling age increased the leaf thickness of those leaves. Different sowing time and the seedling age did not influence on the leaf area contraction ratio and leaf thickness of leaf, tip and green tip. 12.There were significantly negative correlation between leaf area of lug and cutter and weight per unit leaf area, percentage of dry matter and leaf thickness of the lug and cutters, but no correlation between those characters of leaf, tip and green tip. Weight per unit leaf area correlated positively with percentage of dry matter and specific leaf weight in all stalk position. In the lug and cutter, weight per unit leaf area correlated positively with leaf thickness and negatively with leaf area contraction between weight per unit leaf area and leaf area contraction ratio. There were negative correlation between leaf thickness and leaf area contractions of lugs and cutters, and no correlation between those characters of leaf, tip and green tip. 13.There were not significant effects of seedling bed materials applied in this experiment on the growth after setting and yield components.

전통마을 경관보전에 관한 정책대안 연구

신상섭,허준,노재현 한국정원학회 2002 한국전통조경학회지 Vol.20 No.2

The purpose of this research make a counter proposal on the conservation state and policy of traditional village(Asan Woeam:牙山 外岩村, Andong Hahoe:安東 下回村, Kyeongju Yangdong:慶州 良洞村, Soonchun Nakaneupsung:順天 樂安邑城村) landscape. Up until now, it is true that the value of traditional village landscape had been buried and the conservation of those places has been measured only on the basis of their basis of their economic value. In the future, we will try to recognize the value of traditional village as the history of villagers lives and to cherish their diversity, that the current interests of people persist and also provides the opportunity to recover the beautiful landscape of traditional village. The conservation policy of traditional village landscape in the Korea must have designation as landscape cultural assets, introduction technique of landscape impact assessment, consolidation of landscape state, land use system adjustment, participation of landscape specialist, toward sustainable tradition village, introduction of new community village idea. Also, there are necessary set up of traditional landscape design criteria and master plan, operation of landscape impact evaluation.

Nortriptyline 제제의 생물학적 동등성에 관한 연구

신재국,차인준,장인진,정원석,김용식,박찬웅,신상구 大韓臨床藥理學會 1993 臨床藥理學會誌 Vol.1 No.1

만성 신부전 환자에서 혈액투석에 의한 Isoniazid의 제거

신재국,차인준,장인진,신상구,김윤구,한진석,김성권 大韓臨床藥理學會 1994 臨床藥理學會誌 Vol.2 No.2

구리의 전기석출시 젤라틴이 물성에 미치는 영향

신석재,강현춘,안형환,강안수,김용렬,한성만,이한섭 明知大學校 産業技術硏究所 1995 産業技術硏究所論文集 Vol.14 No.-

In the electrodeposition of copper foil for preparing printed circuit boards, a little amount of gelatin as a addition agent has been used for the better characteristics of a coat of electroplating. Gelatin modifies the physical properties such as mechanical strength, matte-side roughness, ultimate tensile strength(U.T.S), and elongation of copper foil, furthermore gelatin have influence on the structure of electrodeposits and the cathode polarization. The electrolyte used was of a composition; CuSO₄·5H₂O 300g/ℓ, H₂SO₄ 100g/ℓ, NaCl 10 ppm as a brightner, and was gelatin 0-7 ppm as a addition agent. Current density was 50 A/dm², and the temperature of electrolytic bath was 50 to 52 ℃. Experiments showed that the optimum gelatin concentration was 5 ppm with the consideration of the numbers of electrodeposited nuclei. And the nuclei numbers was sharply increased under 5 ppm, but was almostly constant above 5ppm. Average matte-side roughness by Surfcorder was gradually increased with the increasing gelatine concentration up to 2 ppm, and maximum roughness was observed at 2ppm. The roughness showed gradual decrease within the concentration range of 2 to 4 ppm, and was almost constant above 4ppm . Within the gelatine concentration range of 0 to 7 ppm, as the concentration increased, UTS was increased and elongation was decreased logarithmically. Also, in comparison between UTS and elongation, gelatin was identified as an addition agent acting inversely.