주차원단위 산정 모형 개발에 관한 연구 -광주광역시 공동 주택 아파트를 대상으로-

권성대,고동봉,박제진,하태준,Kwon, Sung-Dae,Ko, Dong-Bong,Park, Je-Jin,Ha, Tae-Jun 대한토목학회 2014 대한토목학회논문집 Vol.34 No.2

도시의 급격한 팽창과 함께 주택부족 현상이 나타나게 되자, 정부는 주택부족 문제 해결을 위해 대규모 택지개발을 통하여 주택보급을 확대시켰다. 이러한 현상으로, 공동주택은 우리나라 전체 주택의 83% 수준을 유지하고 있고, 그 중 아파트가 차지하는 비중은 50%로 꾸준한 증가 추세를 보이고 있다. 이로 인해 아파트의 경우 입주민들의 승용차 보유 증가에 따른 아파트 단지 내 주차공간 부족문제 등 제반 주차 관련 문제가 발생하고 있다. 특히, 주차계획대수 수립 시 교통영향평가의 주차수요예측 중 전용면적을 고려한 주차원단위 산정 방법은 기존 계획보다 세대수는 증가하여도 전용면적이 작아지면 계획주차대수는 감소하는 것으로 나타나, 보다 현실적인 주차원단위 산정이 필요한 실정이다. 이에 본 연구는 공공주택 아파트를 대상으로 현실에 적합한 주차원단위를 산정하고자 한다. 현장조사 및 설문조사를 실시하고, 구득자료에 대한 분석을 수행함으로써, 기존 교통영향평가의 주차원단위 산정 문제점을 도출하였다. 또한, 주차수요예측에 영향을 미치는 요인 선정을 통해 주차원단위 산정모형을 개발하였다. 마지막으로 실제 조사된 아파트 주차원단위 자료를 통해 기존 교통영향평가의 주차원단위 산정과 본 연구에서 제시한 주차원단위 산정모형을 비교 분석하였다. 향후 본 연구에서 개발된 주차원단위 산정모형은 주차장법 기준 정립은 물론 보다 현실적인 주차수요예측 수행에 적극 활용될 수 있을 것으로 판단된다. The rapid expansion of cities led to the shortage of housing in urban areas. The government compensated for this shortage through large scale residential developments that increased the housing supply. The supply of condominium apartments remains above 83% of the entire housing supply, and the proportion of apartments are at a steady increase, at about 50%. Due to the increase, illegally parked cars resulting from the shortage of parking spaces within the apartment complex have become increasingly problematic as they block the transit of emergency vehicles, and heighten the tension among neighboring residents in obtaining a parking space. Especially, the future residents are considered to plan the parking based on the estimated demand for parking. However, the parking unit method utilized to estimate the parking demand accounts for the exclusive use of space, which is believed to be far from the parking demands in reality. The reason for this discrepancy is that, as the number of households decrease, and area of exclusive space is expanded, the planned parking increases. On the other hand, when the number of households increase, and the area of exclusive space is reduced, the planned parking decreases, thus methods to recalculate the parking units based on estimated parking demand is an urgent concern. To estimate the parking units based on condominium apartments, this study first examined the existing research literature, and appointed the field of investigation to collect the necessary data. In addition, field study data and surveys collected and analyzed, in order to identify the problems underlying parking units, and problems regarding the current traffic impact assessment parking unit calculation method were deduced. Through identifying the influential factors on parking demand estimates, and performing a factorial analysis based on the collected data, the variables were selected in relation to the parking demand estimates, to develop the parking unit estimate model. Finally, through comparing and verifying the existing traffic impact assessment parking unit estimate against the newly developed model using collected data, a far more realistic parking unite estimate was suggested, reflecting the characteristics of the residents. The parking unit estimate model developed in this study is anticipated to serve as the guidelines for future parking lot legislature, as wel as the basis to provide a more realistic estimate of parking demands based on the resident characteristics of an apartment complex.

Improvement of interlaminar properties of carbon fiber‑reinforced epoxy composites using aluminum trihydroxide

Dong‑Jun Kwon,Sung‑Min Park,Il‑Jun Kwon,Joung‑Man Park,Euigyung Jeong 한국탄소학회 2019 Carbon Letters Vol.29 No.2

This study provides an economical and effective method to improve the interlaminar properties of carbon fiber-reinforced polymers (CFRPs) using aluminum trihydroxide (ATH) microparticles. ATH microparticles are cheap and are expected to show good affinity to epoxies in the matrix and sizing agents of the carbon fibers owing to the presence of three hydroxyl groups. In addition, ATH particles are reported to improve the mechanical properties of polymers when used as the reinforcement. In this study, ATH microparticles of various sizes, 1.5, 10, and 20 μm, were used to improve the interlaminar properties of the CFRPs. ATH particles with a size of 1.5 μm improved the tensile properties of the ATH/epoxy resin and did not significantly alter the curing behavior. The interfacial adhesion between the carbon fiber and the epoxy resin was also improved, and the impregnation of the resin mixture remained similar to that of the neat resin, resulting in no significant void and defect formation. Considering the above results, the resulting 1.5 μm ATH-reinforced CFRP showed improved interlaminar properties compared to CFRP without ATH. However, 10 and 20 μm ATH-reinforced CFRPs showed deteriorated interlaminar properties due to the diminished tensile properties of the resin itself and resin impregnation, which resulted in more voids and defects, despite the interfacial adhesion between the fiber and the matrix resin.

PHV年齡에서 본 體格 ·體力의 發育 ·發達 速度曲線에 관한 연구

朴哲浩,朴贊熙,朴俊東,朴相甲,辛尙根 東亞大學校附設스포츠科學硏究所 1992 스포츠科學硏究論文集 Vol.10 No.-

The purpose of this study was to examine the timing and sequence of growth and development velocity curves of some physique and physical fitness aligned on age at peak height velocity. The study design, the subjects, and the method used in cross-sectional investigation reported by Ministry of Physical Education and Youth of Korea(1989). According to the reported by Ministry of Physical Education and Youth, the subjects participated in goverment study were 7 through 50 over years of age who belonged to typical primary, junior and senior high school, college and adult, and about 550 males and 550 females in each age. Thus, the total sample size were 6,316 males and 6,316 females. Grand total was 12,632. For physique measured, 2 body linearity items ; body height and sitting height, 5 body bulk items ; body weight, chest girth and 3 site skinfold thickness items were selected. For physical fitness measured, 8 items such as grip strength, sit-ups, 10m shuttle run, standing long jump, 50m dash, long distance run, eyeclosed foot balance and trunk flexion were selected. Measurements were actually worked out in April through July, 1989. The mean and the standard deviation were computed for each itesm, each age, and each sex, respectively. The growth and development velocity magnitudes of some physique and physical fitness in this study were calculated by personal computer. The conclusion obtained as follows. 1. Ages at PHV occurred earlier about 3years than males on the average. 2. Maximal annual increments (PV) in body weight, chest girth and sitting height appeared to coincide with PHV in males, but, to about 1 and 2 years after PHV in females. 3. Two occurrence of peak velocity gained in the chest girth for males and 3 site skinfold for females. In contrast, peak velocity of triceps skinfold was not appeared in males. 4. Peak velocities of grip strength and trunk flexion occurred about 1 to 2 years after PHV in both sexes. Peak velocities of 50m dash and long distance run occurred about 1 to 2 years after PHV in males. 5. Peak velocities of sit-ups, standing long jump and eyeclosed foot balance occurred about 1 to 2 years before PHV in both sexes, respectively. 6. Peak velocity of 10m shuttle run was not occurred in both sexes, peak velocity of 50m dash was not occurred in females. 7. Generally, peak velocities of physique and physical fitness occurred earlier about 1 to 3 years in females than in males.

연령증가에 따른 혈압요소들의 좌심실비대 및 관동맥질환과의 관련성

박재석,박창규,박미영,박재형,김용현,나진오,신성희,서순용,홍순준,박성미,임홍의,김응주,서홍석,오동주,노영무 대한순환기학회 2004 Korean Circulation Journal Vol.34 No.2

NGS_SNPAnalyzer: a desktop software supporting genome projects by identifying and visualizing sequence variations from next-generation sequencing data

Dong‑Jun Lee,Taesoo Kwon,Chang‑Kug Kim,Young‑Joo Seol,Dong‑Suk Park,Tae‑Ho Lee,Byung‑Ohg Ahn 한국유전학회 2020 Genes & Genomics Vol.42 No.11

Background Sequence variations such as single nucleotide polymorphisms are markers for genetic diseases and breeding. Therefore, identifying sequence variations is one of the main objectives of several genome projects. Although most genomeproject consortiums provide standard operation procedures for sequence variation detection methods, there may be differencesin the results because of human selection or error. Objective To standardize the procedure for sequence variation detection and help researchers who are not formally trainedin bioinformatics, we developed the NGS_SNPAnalyzer, a desktop software and fully automated graphical pipeline. Methods The NGS_SNPAnalyzer is implemented using JavaFX (version 1.8); therefore, it is not limited to any operatingsystem (OS). The tools employed in the NGS_SNPAnalyzer were compiled on Microsoft Windows (version 7, 10) andUbuntu Linux (version 16.04, 17.0.4). Results The NGS_SNPAnalyzer not only includes the functionalities for variant calling and annotation but also providesquality control, mapping, and filtering details to support all procedures from next-generation sequencing (NGS) data to variantvisualization. It can be executed using pre-set pipelines and options and customized via user-specified options. Additionally,the NGS_SNPAnalyzer provides a user-friendly graphical interface and can be installed on any OS that supports JAVA. Conclusions Although there are several pipelines and visualization tools available for NGS data analysis, we developedthe NGS_SNPAnalyzer to provide the user with an easy-to-use interface. The benchmark test results indicate that theNGS_SNPAnayzer achieves better performance than other open source tools.

Influence of Al2O3 Content and Cooling Rate on Crystallization in Fe2O3–CaO–SiO2–Al2O3 Systems

Tae Jun Park,Joon Sung Choi,Dong Joon Min 대한금속·재료학회 2022 METALS AND MATERIALS International Vol.28 No.9

The behavior of silico-ferrite of calcium and aluminum (SFCA) phases and the influence of sintered ore quality were investigatedusing a confocal laser scanning microscope to understand how the Al2O3content of iron ore affects the sintered orestructure and the crystallization behavior of SFCA in a Fe2O3–CaO–Al2O3–SiO2 pseudo-quaternary system. The experimentalresults were used to inform simulations of the heterogeneous dynamic behavior in response to the rapid temperature changesand various chemical compositions typically encountered in actual sintering processes. Increasing the Al2O3content in theFe2O3–CaO–Al2O3–SiO2 pseudo-quaternary system led to the hematite content decreasing, which affects the reducibilityof the sintered ore. The correlation between the creation of SFCA and the cooling effect associated with varying the Al2O3is discussed in detail.

한국인 직무 스트레스 측정도구의 개발 및 표준화

장세진,고상백,강동묵,김성아,강명근,이철갑,정진주,조정진,손미아,채창호,김정원,김정일,김형수,노상철,박재범,우종민,김수영,김정연,하미나,박정선,이경용,김형렬,공정옥,김인아,김정수,박준호,현숙정,손동국 大韓産業醫學會 2005 대한직업환경의학회지 Vol.17 No.4

Background and Purposes: Over the past three decades, numerous studies performed in Korea have reported that job stress is a determinant risk factor for chronic diseases and work disability. Every society has its own culture and occupational climate particular to their organizations, and hence experiences different occupational stress. An occupational stress measurement tool therefore needs to be developed to estimate it objectively. The purpose of this study is to develop and standardize the Korean Occupational Stress Scale (KOSS) which is considered to be unique and specific occupational stressors in Korean employees. Subjects and Methods: Data were obtained from the National Study for Development and Standardization of Occupational Stress (NSDSOS Project: 2002-2004). A total of 12,631 employees from a nationwide sample proportional to the Korean Standard Industrial Classification and the Korean Standard Occupational Classification were administered. The KOSS was developed for 2 years (2002-2004). In the first year, we collected 255 items from the most popular job stress measurement tools such as JCQ, ERI, NIOSH and OSI, and 44 items derived from the a qualitative study (depth interview). Forty-three items of KOSS, in the second year, were retained for use in the final version of the KOSS by using Delphi and factor analysis. Items were scored using conventional 1-2-3-4 Likert scores for the response categories. Results: We developed eight subscales by using factor analysis and validation process: physical environment (3 items), job demand (8 items), insufficient job control (5 items), interpersonal conflict (4 items), job insecurity (6 items), organizational system (7 items), lack of reward (6 items), and occupational climate (4 items). Together they explained 50.0% of total variance. Internal consistency alpha scores were ranged from 0.51 to 0.82. Twenty-four items of the short form of the KOSS (KOSS-SF) were also developed to estimate job stress in the work setting. Because the levels of the subscales of occupational stress were gender dependent, gender-specific standard norms for both the 43-item full version and the 24-item short form using a quartile for the subscales of KOSS were presented. Conclusion: The results of this study suggest that KOSS might be an appropriate measurement scale to estimate occupational stress of Korean employees. Further and more detailed study needs to be conducted to improve the validity of this scale.

관동맥질환에서 저밀도 지단백 입자 크기의 분포

임효영,김인숙,승기배,강동헌,전두수,장기육,박준철,이수영,홍순조,최규보 대한순환기학회 1998 Korean Circulation Journal Vol.28 No.8

근적외선을 이용한 두개강내 혈종의 진단

박정율,홍기선,김상대,김세훈,임동준,조태형 대한체열학회 2003 대한체열진단학회지 Vol.3 No.1

운동속도와 시각피드백의 유무가 회전이동운동의 정확성에 미치는 영향

박준동,마정순 東亞大學校 附設 스포츠科學硏究所 1995 스포츠科學硏究論文集 Vol.13 No.-

The purpose of this study was to investigate the effects of the changes of movement speed and viausl feedback on the movement accuracy in rotary locomotion. Fifteen women university ballet dancers(The groups consisted of High group and Low groups) were used for the experiments. 1. In the maximal speed, movement time was significant in visual feedback and direction error was in non-visual between conditions(P<.001) and high group and Low group(P<.01) 2. In the maximal speed, distance was decreased in high group and low group, distance error(%) was increased in visual conditions. 3. Direction error in Low group were much affected on non-visual the longer the distance. The general tendency of direction error in high group was appeared to positive direction(+) in visual condition and low group was appeared to negative direction(-).