항체 및 보체에 의한 폐흡충(Paragonimus westermani)피낭유충의 형태학적 변화

민득영,김경민,우남식 한양대학교 의과대학 1989 한양의대 학술지 Vol.9 No.1

The lung fluke, Paragonimus westermani, is widely distributed in Korea and has been well documented as a causative parasite for human paragonimiasis. According to long survival of this parasite against various host defense mechanisms in the infection the disease is persisted, but the fact on host-parasite relationship is still obscure. The present study was investigated to elucidate the effect of specific antibody and complement on metacercaria of lung fluke through the observation of morphological change after incubation of both antibody and complement. Metaceracriae were collected from infected crayfish, Cambaroides similis, and excysted metacercariae were incubated with antibody (3.6mg/100㎕) and complement (fresh rabbit serum) in MEM (pH 7.4) at 36℃, 5% CO₂incubator. The observations with light, scanning (SEM) and transmission (TEM) electron microscope were made 12 and 48 hours after incubation. The results obtained were as follows: 1. Of normal metacercariae three types of papillae (large, small domed and ciliated) and spines were observed on entire body surface with SEM. 2. In metacercariae incubated with antibody and complement, shape of worms was distorted. Flattened surface and partial fusion of paillae were also observed with SEM. 3. Typical syncitium with spines of trematodal tegument was observed with TEM. 4. On the observation of metacercaria incubated with antibody and complement with TEM flattened tegumental surface, degenerated epidermal cells and distorted wide protoplasmic tubules were noticed. With above results it is presumed that antibody and complement might act directly as effectors on functional and morphological impediment of tegument of metacercariae.

Escherichia coli 패혈증 환자에 합병된 대칭적 하지 말단 괴사증 1예

남해성,유진홍,권순석,민준기,조현선,박민경,심병주,남유정,이지인,김진수,길욱현,조근종,신완식 대한감염학회 2005 감염과 화학요법 Vol.37 No.6

We have encountered a rare case of symmetrical peripheral gangrene complicating Escherichia coli sepsis in a 47-years-old male. He was successfully treated with antibiotics, anticoagulants, and vasodilator. To our knowledge, this is the first report on symmetrical peripheral gangrene complicating E. coli sepsis in Korea.

전남산 젓갈류의 유리아미노산 조성

허남칠,김선민,박은령,박평심,김경수,이명렬 조선대학교 기초과학연구소 1998 自然科學硏究 Vol.21 No.1

This study was designed to investigate the free amino acid compositions of salt-fermented fish products in the markets of Chonnam area. The results were as follows : The free amino acid compositions of salt-fermented fish products had varying figures according to the species of raw materials, that is, lysine and leucine were relatively abundant in Myul-chi jeot (salt-fermented anchovy), arginine inSae-woo jeot (salt-fermented small shrimp), glutamic acid inJa-oi jeot (salt-fermented small shrimp). lysine, arginine, alanine and phenylalanine in To-h jeot (salt-fermented trout), etc. Essential amino acid contents were contained 31.02%∼83.46% of total amino acids in all sample, and lysine and leucine were most abundant among essential amino acids. Especially tryptophan was the richest in Cham-jo-gae jeot, phenylalanine in To-ha jeot, Kal-chi-nae-jang jeot and Song-eo jeot in other essential amino acids. because the degree of protein degradation wouldl be influenced on fermentation periods, salt-concentration, fermentation temperature, etc, we expected more systemic research by some varied conditions and the developed analytical techniques on the salt-fermented fish products should be followed.

산업폐기물인 폐주물사를 혼입한 콘크리트의 최적배합설계

박재선,김태경,백민경,이주형,윤경구,김남윤 강원대학교 석재복합신소재제품연구센터 1997 석재연 논문집 Vol.2 No.-

산업폐기물인 폐주물사를 재활용하여 에너지 절감과 환경오염효과를 얻을 수 있다. 반요인실험법을 사용하여 폐주물사를 잔골재에 일정비율 치환한 콘크리트의 최적배합설계 제시를 위한 예비실험에서 물-시멘트비, 폐주물사의 잔골재 치환율, 잔골재율, 슬럼프와 같은 주요변수와 변수사이의 2차상호작용을 파악하였다. 예비실험결과 폐주물사의 잔골재치환율을 70%까지 실시하였을 때 폐주물사를 혼입한 콘크리트의 강도발현에 가장 중요한 변수는 물-시멘트비로 분석되었고 폐주물사의 잔골재치환율은 거의 영향이 없는 것으로 분석되어 폐주물사를 콘크리트의 잔골재로 대체할 수 있음을 알 수 있었다. 각 변수의 2차상호작용에서는 폐주물사의 잔골재 치환율과 잔골재율의 상관관계가 콘크리트의 강도발현에 가장 큰 영향을 미치는 것으로 나타났다. 목표압축강도에 대한 최적배합조건을 폐주물사의 잔골재 치환율에 따라 물-시멘트비, 잔골재율에 대해 제시하였다. The waste foundry sand might be recycled in concrete, saving energy and protect-ing environment. An half- factorial experiments were performed with the primarary variable such as water- cement raito, waste foundry sand substitution ratio, fine agg-regate ratio and slump as a preliminary study for optimum mix design of concrete. The preliminary study show that the water- cement ratio is the most important factor to the concrete strength, followed by slump. The substitute of waste foundry sand up to 70% has little infulence, indicating that it can substitute the fine aggregate without damaging the Concrete strength. The interaction between waste foundry sand substitution ratio and fine aggregate ratio was most significant to the concrete strength among the 2-way interaction variable. Only compressive strength affect to the formation of optimum mix design area as target compressive strengh becomes bigger. Optimum mix designs of concrete incorporating waste foundry sand, satisfying the target responses, were proposed in terms of waste foundry sand substitution ratio, water cement ratio and fine aggregate ratio.

Surface Modification of Block Copolymer Through Sulfur Containing Plasma Treatment

Choi, Sang Wook,Shin, Jae Hee,Jeon, Min Hwan,Mun, Jeong Ho,Kim, Sang Ouk,Yeom, Geun Young,Kim, Kyong Nam American Scientific Publishers 2015 Journal of Nanoscience and Nanotechnology Vol.15 No.10

<P>Some of the important issues of block copolymer (BCP) as an application to the potential low cost next generation lithography are thermal stability and deformation during pattern transfer process in addition to defect density, line edge/width roughness, etc. In this study, sulfur containing plasma treatment was used to modify the BCP and the effects of the plasma on the properties of plasma treated BCP were investigated. The polystyrene hole pattern obtained from polystyrene polystyrene-block-poly(methyl methacrylate) (PS-b-PMMA) was initially degraded when the polystyrene hole was annealed at 190 degrees C for 15 min. However, when the hole pattern was treated using sulfur containing plasmas using H2S or SF6 up to 2 min, possibly due to the sulfurization of the polystyrene hole surface, no change in the hole pattern was observed after the annealing even though there is a slight change in hole shapes during the plasma treatment. The optimized plasma treated polystyrene pattern showed the superior characteristics as the mask layer by showing better thermal stability, higher chemical inertness, and higher etch selectivity during plasma etching.</P>

Layer-controlled thinning of black phosphorus by an Ar ion beam

Park, Jin Woo,Jang, Sung Kyu,Kang, Dong Ho,Kim, Doo San,Jeon, Min Hwan,Lee, Won Oh,Kim, Ki Seok,Lee, Sung Joo,Park, Jin-Hong,Kim, Kyong Nam,Yeom, Geun Young Royal Society of Chemistry 2017 Journal of Materials Chemistry C Vol.5 No.41

<▼1><P>BP thinning was carried out using a monoenergetic Ar<SUP>+</SUP> ion beam and the BP could be thinned without damaging the surface.</P></▼1><▼2><P>Black phosphorus (BP) is one of the most interesting two-dimensional (2D) layered materials due to its unique properties, including a band gap energy change from 0.3 eV (bulk) to 2.0 eV (monolayer) depending on the number of BP layers, for application in nanoelectronic devices. In general, 2D layered materials including BP have limitations in terms of synthesis due to the process factors such as time, temperature, <I>etc.</I>, and thus, a thinning technique from the bulk material to a 2D material needs to be used while controlling the removed layer thickness. In this study, layer-controlled thinning of BP was performed by using a controlled Ar<SUP>+</SUP> ion beam method and the BP thinning characteristics were investigated. By using the near monoenergetic ion energy in the range of 45–48 eV, BP could be thinned with the thinning rate of ∼0.55 nm min<SUP>−1</SUP> down to bilayer BP without increasing the surface roughness and without changing the chemical binding states. The BP oxide on the pristine BP could also be successfully removed using the same Ar<SUP>+</SUP> ion beam. 2D BP field-effect transistors (FETs) fabricated with the thinned bilayer–10-layer BPs exhibited electrical characteristics similar to those of pristine BP FETs suggesting no electrical damage on the BP layers thinned by the controlled monoenergetic Ar<SUP>+</SUP> ion beam.</P></▼2>

Incidence of Patulin Contamination and Isolation of Patulin Producing Penicillium expansum from Decayed Apples

Min Jung,Min Jung Choo,Kyu Ri Lee,Sung Min Cho,Hyong Kyong Nam,Sung-Yong Hong,Soo Hyun Chung 한국식품영양과학회 2016 한국식품영양과학회 학술대회발표집 Vol.2016 No.10

경화제와 점착부여제가 아크릴 고무점착제의 내열성에 미치는 영향

남경민 ( Kyong Min Nam ),김철용 ( Chul Yong Kim ),김은선 ( Eun Seon Kim ),김광제 ( Woo Jin Choi ),최우진 ( Kwang-je Kim ),김기태 ( Ki-tae Kim ),박명철 ( Myung-chul Park ) 한국접착및계면학회 2017 접착 및 계면 Vol.18 No.4

본 연구에서는 2-ethylhexyl acrylate, styrene, butadien, 2-hydroxyethyl acrylate, acrylic acid 등의 단량체 조성과 개시제 함량을 조절하여 아크릴고무 점착제를 합성하였다. 제조된 점착제를 이용하여 점착부여제와 경화제를 변화시켜 초기점착력, 점착력, 유지력, 그리고 내열성을 측정함으로써 그 영향을 조사하였다. 실험 결과 개시제의 함량이 증가하면 분자량이 감소하여 초기점착력과 점착력이 증가하였으나, 유지력과 내열성은 감소하는 것을 확인 할 수 있었다. 점착부여제에 따른 물성 변화는 점착 부여제의 함량을 높일수록 일정 수준까지는 점착력이 높아 졌으나, 초기점착력과, 유지력, 내열성에서는 함량변화에 따른 물성변화가 크지 않았다. 경화제 함량에 따른 물성 변화는 경화제의 함량을 높일수록 경화밀도가 증가하여, 초기점착력과 점착력은 감소하였고 반면에 유지력과 내열성은 높아지는 경향을 나타내었다. In this study, acrylic rubber pressure sensitive adhesives was polymerized with 2-ethylhexyl acrylate, styrene, butadiene, 2-hydroxyethyl acrylate, and acrylic acid by controlling the initiator content. The initial tackiness, peel strength, holding power, and heat resistance of the PSAs were investigated by changing the content of tackifier and curing agent. The results showed that the initial tackiness and peel strength increased as the content of tackifier increased, whereas the holding power decreased. Also, the results exhibited that that the initial tackiness, peel strength, and heat resistance decreased as the content of curing agent increased, whereas the holding power and decreased.

앵커의 두부처리 개선방법에 관한 연구

민경남(Kyong-Nam Min),안광국(Kwang-Kuk Ahn),이처근(Cheo-Keun Lee),배우석(Woo-Seok Bae),한진희(Jin-Hee Han),이현우(Hyun-Woo Lee) 한국지반환경공학회 2010 한국지반환경공학회 학술발표회논문집 Vol.2010 No.5

불연속면내 점토충전물을 고려한 사면 안정해석 연구

민경남(Min Kyong Nam),안태봉(Ahn Tae Bong),양승준(Yang Seung Jun),백선기(Baek Seon Gi),이태선(Lee Tae Sun) 한국암반공학회 2007 터널과지하공간 Vol.17 No.3

불연속면을 따라 점토 등의 충전물이 포함된 경우에는 불연속면의 방향이 유리하게 작용하더라도 사면안정에 불안정성을 초래한다. 연구지역의 사면활동은 점토충전물과 풍화토의 경계를 따라 발생하였다. 이것은 물성의 차이를 보이는 경계부분이 존재했기 때문이며, 암석에서 엽리 등이 구조적 운동시 연약대로 작용하여 층간의 미끄러짐을 유도하는 현상과 매우 유사하다. 대부분의 해석에서 점토충전물이 존재할 경우에는 하나의 불연속면으로 설정하여 해석한다. 이때의 불연속면은 점토층내에서의 활동면으로 해석되므로 점토와 원지반과의 경계부의 특성이 해석에 고려되지 못하여 불연속면의 거동은 결국 점토의 물리적 성질에 많이 지배된다. 점토충전물로 인한 활동사면의 안정성 평가 결과는 충전물에 의한 불연속면의 파괴유형에 따른 강도정수에 의해 안전율에 상당한 차이를 보인다. When filling material such as clay is included along the discontinuity, it may cause instability on a slope even if the direction of discontinuity works in a positive way. In the study area, slope sliding occurred at the boundary between a clay filling material and weathered soil because the physical properties differ across the boundary; and this is very similar to the situation where foliation in a rock works as a weak zone during a structural behavior, causing an inter-layer slip. In most analysis, if there exists a clay filling material, a single discontinuity is assumed to perform analysis. In those cases, the discontinuity is modeled as a slip surface within clay. Therefore, the characteristics of the boundary are not considered in the analysis, so that ultimately the physical property of clay usually prevails. The result of evaluating the slope stability affected by clay filling material shows the significant difference in the safety level due to the strength parameter depending on the failure type of the discontinuity by a filling material.