동적, 실시간 체열촬영술

박정율 대한체열학회 2003 대한체열진단학회지 Vol.3 No.1

보조공학기기 이용실태 및 서비스 희망에 대한 심층면접

정민예,김정란,양노열,유인규,박혜연 대한보조공학기술학회 2009 대한보조공학기술학회지 Vol.1 No.1

목적 : 구직장애인, 장애인공무원과 지원을 많이 받아보지 않은 사업주를 대상으로 심층면접을 통해 보조공학기기 이용실태 및 서비스 희망을 조사하고, 이를 통하여 앞으로 보조공학서비스 서비스 방향을 제안하고자 조사하였다 연구방법 : 심층면접의 대상자는 장애인공무원, 구직장애인, 사업주로 분류하여 반구조화된 가이드라인 설문을 구성하였다. 면접 대상은 설문조사를 위한 모집단 중 무작위로 추출하여 면담 조사에 협조를 약속한 대상자 사업주 7명, 구직장애인 7명, 장애인공무원 5명을 대상으로 총 19명이 응답에 참여하였다. 결과 : 수집된 자료는 질적 분석 절차를 통해 보조공학기기의 사용경험, 보조공학기기 신청경험 또는 개인적 구입경험, 장애유형에 관련된 보조공학기기의 사용경험여부 및 인식조사, 보조공학서비스에 대한 인식정도 및 이용경험과 보조공학서비스 방향과 추가로 제공을 희망하는 서비스 내용 5가지의 주제가 도출되었다. 결론 : 보조공학서비스의 보다 효율적인 운영방식을 고려해야 할 것이며, 보조공학서비스를 할 때 구입이나 사후 관리도 보다 사용자 중심에서 서비스 제공이 필요할 것이다. Objective : The purpose of this study was to provide the information about the actual demand and use of assistive technology among people with disabilities who not received assistive technology service. Methods : In-depth interview subjects were government officials with disable, disabled job seekers, and employers hiring workers with disabilities. We made up the semi-structure guidelines question with group into three classes. We asked for an interview with subjects that choose samples at random. Results : These results show five themes related to use and application experience in assistive technology, the awareness of assistive technology service, and the demand to make of assistive technology service. Conclusion : In conclusion, we suggests that they want to be included assistive technology services target and replied use of those assistive devices will help them to get a job or to improve work efficiency and capacity.

고주파 해저면 반사손실의 주파수 종속성 측정

박순식,최지웅,윤관섭,나정열 한양대학교 이학기술연구소 2002 이학기술연구지 Vol.5 No.-

During the last several decades, although there have been lots of efforts to develope the high-frequency bottom reflection loss model, the frequency dependence of bottom loss was not considered in most cases because the sea bottom was assumed to be generally much smoother and lower gradient than the sea surface. However, if the sea bottom is rougher than acoustic wavelength, the scattered field will be increased and the reflected field will be decreased. In this paper, the high-frequency bottom reflection losses were obtained through the measurement of reflected waves from the artificially-made-flat sandy bottom. The experimental data were compared with the values calculated by the forward loss model of Mourad & Jackson. Conseouently, we suggest the frequency dependence of bottom reflection loss. 기존 해저면 반사손실 모델들은 해저면을 해수면에 비해 거칠기와 경사도가 매우 평탄하거나 완만한 경계면으로 가정하므로 주파수에 따른변화를 고려하지 않거나 미약하다고 가정하였다. 그러나 고주파를 사용하는 소오나 시스템의 경우, 음파의 파장에 비해 해저면이 거칠다면 음파는 산란 영향이 증가하게 되므로 상대적으로 반사손실 또한 증가하게 된다. 따라서 본 논문에서는 임의로 모의된 사질 성분의 해저면에서 수십 ㎑ 이상의 고주파들을 사용하여 주파수별 반사손실을 계산하고, 이를 기존의 해저면 반사손실 모델과 비교하였으며, 해저면 반사손실의 주파수 종속성을 제시하고자 한다.

연주복 선호 디자인에 따른 패턴 연구 : 피아노와 성악 중심으로

박성율,홍정민 한국의류산업학회 2003 한국의류산업학회지 Vol.5 No.5

The present study revealed ; that (1) The students majoring in a piano course were the preference type of the performance dress - best line was designed of upper form chest. It was 1.5cm shorter than armhole line, the princess line was preferred Top one piece without sleeves which was designed with slim by bottom line through west dart form best line. The expression method was showing embroidery and bidding, colors were in order to white, ivory, black and blue style. The material was in order to silk with glorious shinning, silk satin and race style. (2) The students majoring in a vocal music were the preference type of the performance dress - the princess line was designed shorter, the west line of back and forth was preferred the one piece of bulk style divided with three partitions. Neck line was 5cm shorter than the middle of back, 9cm shorter than the side neck position, 9cm shorter than the middle of forth, sweet heart neck line with circular sleeve designed 7cm shorter than the side neck position. Colors were in order to ivory, red and yellow style. The material was in order to silk with glorious shinning silk satin and race style.

근적외선을 이용한 두개강내 혈종의 진단

박정율,홍기선,김상대,김세훈,임동준,조태형 대한체열학회 2003 대한체열진단학회지 Vol.3 No.1

재발성 다발성 연골염

박용범,이시훈,정상윤,이수곤,홍순원,김정민,이창률 대한내과학회 2001 대한내과학회지 Vol.61 No.3

광중합기의 광원에 따른 브라켓 전단결합강도 비교

차정열,이기준,박선형,김태원,유형석 대한치과교정학회 2006 대한치과교정학회지 Vol.36 No.3

제논 플라즈마 아크 광중합기나 LED 광중합기가 치과영역에 소개된 이후로 기존의 텅스텐 할로겐 광중합기를 사용할 때에 비해 교정장치의 부착시간이 현저하게 줄어들 수 있게 되었다. 제논 플라즈마 아크 광중합기에 대한 중합시간과 전단강도에 대해서는 여러 연구가 있어왔던 반면, LED 광중합기를 이용하여 교정용장치의 부착을 위한 중합시간에 대한 연구는 미진하다. 본 연구의 목적은 LED 광중합기의 중합시간에 따른 결합강도를 플라즈마 아크 광중합기와 비교하여 적절한 브라켓의 부착강도를 얻기 위해 요구되는 중합시간을 알아보는데 있다. 120개의 발치된 사람의 소구치에 컴포짓 레진으로 브라켓을 부착시킨 후 4초, 6초, 8초 동안 플라즈마 아크 광원과 LED 광원으로 각각 중합시켰다. 그 후 결합강도를 만능시험기(Universal Testing Machine)로 계측한 결과, 플라즈마 아크 광중합기에서는 4초 이상에서, LED 광중합기에서는 8초 이상의 중합시간에서 기존의 할로겐 광원을 40초간 노출시켰을 때와 비슷한 전단결합강도를 나타내었다. 플라즈마 아크 광중합기와 LED 광중합기의 중합시간이 접착제 잔류지수(adhesive remnant index) 수치에 대해 영향을 미치지 않았다. With the introduction of the xenon plasma arc curing light and the LED curing light as orthodontic curing lights, the polymerizing time of orthodontic composites has clearly decreased. In contrast to various research cases regarding the polymerization time and bond strength of the xenon plasma arc curing light, not enough research exists on the LED curing light, including the appropriate polymerization time. The objective of this research was to compare the bond strength of the plasma curing light and the LED curing light in regards to the polymerization time. The polymerization time needed to achieve an appropriate adhesion strength of the bracket has also been studied. After applying orthodontic brackets using composite resin onto 120 human premolars, the plasma arc curing light and the LED curing light were used for polymerization for 4, 6, and 8 seconds accordingly. This research proved that the LED curing light provided appropriate bond strength for mounting orthodontic brackets even with short seconds of polymerization. The expensive cost and large size of the device limits the use of the plasma arc curing light, whereas the low cost and easy handling of the LED curing light may lead to greater use in orthodontics.

열형광 CaSO₄:Dy 소자의 최적 제조조건에 관한 연구

김장렬,남영미,장시영,김두영,양정선,박재우 제주대학교 산업기술연구소 2000 尖端技術硏究所論文集 Vol.11 No.1

An experimental investigation has been performed to determine optimal conditions for preparing the thermoluminescent CaSO4:Dy pellets which have been widely used as personal radiation dosimeter material. Our investigation has shown that an optimal weight concentration of the dopant Dy in the bulk CaSO4:Dy is 0.1 mol%, and an optimal temperature of adding Dy in the preparing process is 320 ℃. An optimal time and temperature for sintering the CaSO4:Dy crystal produced from the chemical process are found to be 2 hours and 800 ℃, respectively. The maximum thermoluminescent sensitivity was observed when the CaSO4:Dy crystal was pulverized to grain sizes of 63 - 200 ㎛ in diameter before being fabricated into pellets. The commercial Teflon was selected as an adhesive for the fabrication of the CaSO4:Dy pellets with an optimal mixing ratio of the Teflon and CaSO4:Dy being 70 to 30 in weight.

열형광 CaSO₄ : Dy 소자의 최적 제조조건에 관한 연구

양정선,장시영,김장렬,김두영,남영미,박재우 濟州大學校 産業技術硏究所 2000 산업기술연구소논문집 Vol.11 No.1

An experimental investigation has been performed to determine optimal conditions for preparing the thermoluminescent CaSO_(4):Dy pellets which have been widely used as personal radiation dosimeter material. Our investigation has shown that an optimal weight concentration of the dopant Dy in the bulk CaS0_(4):Dy is 0.1 mol%. and an optimal temperature of adding Dy in the preparing process is 320℃. An optimal time and temperature for sintering the CaSO_(4):Dy crystal produced from the chemical process are found to be 2 hours and 800℃. respectively. The maximum thermoluminescent sensitivity was observed when the CaSO_(4):Dy crystal was pulverized to grain sizes of 63 - 200 m in diameter before being fabricated into pellets. The commercial Teflon was selected as an adhesive for the fabrication of the CaSO_(4):Dy pellets with an optimal mixing ratio of the Teflon and CaSO_(4):Dy being 70 to 30 in weight.

양다래 과실의 아미노산조성과 유리당의 분석

李明烈,朴貞淑,李柱烈,金忠模,洪石淳 조선대학교 기초과학연구소 1992 自然科學硏究 Vol.15 No.1

Actindia chinensis의 一般成分, 遊離糖 및 amino acid 組成狀態를 알아보기 위하여 HPLC 등으로 분석, 定量한 結果는 다음과 같다. 1. 粗蜜白質量은 2.77%, 炭水化物量은 11.97%이었다. 2. 遊離糖으로는 glucose, fructose, sucrose 및 maltose가 檢出되었으며 과육부에는 fructose, 껍질부에는 sucrose 및 maltose가 많이 함유되었다. 3. 과육질 및 껍질부에서 17種의 總 및 유리 amino acid이 검출되었는데 과육부에는 isoleucine 191.52mg/100g, glutamic acid 160.93mg/100g, 껍질부에는 g1utamic acid 203.36mg/100g, aspartic acid 168.46mg/100g으로 가장 많이 함유되어 있으며, 必須 아미노산 量은 껍질부가 528.23mg/100g으로 과육부 (350.90mg/loog)보다 약 1.5배 정도 많았다. 4. 遊離 아미노산 量은 과육부 (136.89mg/loog)가 껍질부 (120.55mg/100g)에 비해 다소 많았으며 他 과일에 비하여 histidine, arginine量이 많았다. Approximate compositions, and contents of free sugars and amino acids of edible and nonedidle portion in Kiwi fruit 〔Actindia chinensis planch〕were analyzed by HPLC. The results were as follows; The contents of protein and sugars in kiwi fruit were 2.77% and 11.97%, respectively. Glucose, fructose, sucrose and maltose were detected and fructose was rich in edible portion, and sucrose and maltose in nonedible portion. 17 kinds of total amino acids were detected in edible and nonedible portion. The contents of isoleucine(191.52mg/100g) and glutamic acid (160.93mg/100g) in edible portion, and glutamic acid (203.36mg/100g) and asparatic acid (168.48mg/100g) in nonedible portion were high. Total amounts of essential amino acids of nonedidle portion (523.23mg/100g) were rich than that of edible portion (350.90mg/100g). Free amino acids were contained 136.89mg/100g in edible portion and 120.55mg/100g in nonedible portion. Histidine and arginine were found in abundance, compared to other fruits (orange and strawbeery).