흰쥐의 신경병증성 통증에 대한경피신경전기자극과 미세전류신경근자극

이윤주,이충휘,조상현,임중우,남택상 大韓再活醫學會 1999 Annals of Rehabilitation Medicine Vol.23 No.3

Continuous Wave of Condensation Technique으로 근관충전시 치근면 온도상승 분석

김영주,황윤찬,김선호,황인남,최보영,정영진,정우남,오원만 大韓齒科保存學會 2003 Restorative Dentistry & Endodontics Vol.28 No.4

This study was conducted to evaluate the temperature rise on the root surface while the root canal is being obturated using continuous wave of condensation technique. Maxillary central incisor was prepared for repeated canal obturation. Ten thermocouples (Omega Engineering Inc., Stanford, USA) were placed at 1mm increment from the anatomical root apex. The real temperature of Buchanan plugger was recorded before insertion into the root canal. The root canal was obturated with continuous wave of condensation technique as described by Buchanan and the root surface temperature was recorded during obturation at 150℃, 200℃, 250℃ and 300℃ temperature settings of System B HeatSource (Model 1005, Analytic technologies, Redmond, WA, USA). After completion of the temperature recording, the dentinal-cementum thickness at each sites was measured. The data were analyzed using one-way ANOVA followed by Scheffe's test and linear regression test. The results were as follows. 1. When the temperature was set at 150℃, 200℃, 250℃ and 300℃ on the digital display of System B HeatSource, the real temperature of the plugger at the 1mm point from the tip revealed 130.82±2.96℃ 158.00±5.26℃, 215.93±6.91℃ and 249.88±3.65℃ respectively. 2. The position of 8 mm from the anatomical apex showed the highest temperature increase at each temperature settings and it was significantly higher than those of other positions (p<0.01). The temperature rise was constantly increased toward coronal portion from apex of the root. 3. The maximum temperature increase on the root surface was 2.37±0.09℃ at 150℃ setting, 3.11±0.12℃ at 200℃ setting, 3.93±0.09℃ at 250℃ setting and 5.69±0.15℃ at 300℃ setting respectively. These results suggest that it be relatively kind to the supporting tissues of the root that the root canal is obturated using continuous wave of condensation technique at 150℃, 200℃, 250℃ and 300℃ temperature settings on digital temperature display of System B HeatSource.

新農村建設(定住生活圈開發)을 위한 理論的 考察 및 開發需要調査

金鴻允,李弘柱,鄭禮杓,全禹亭,趙興洙,李信昊,全榮吉 안성산업대학교 1992 論文集 Vol.24 No.-

Rural of Koreas has rapidly changed through the process of industrialization and urbanization. During past 30 years, development differences between urban and rural, metroplitan area and area derived from a highly economic growth, bring about dual specialization that deepens overpopulation and sparsity. Therefore, with a new concern about rural, necessity of rural development policy that developes a settlement and life area for settlement for ensuing stablized settlement and living activity of rural people, has been drived step by step. For rural welfare establishment that is settled and good hereafter, this study aims at attempting a theoretical approach about the way of development for rural settlement as a new rural development strategy through examination of today's rural reality, under assumption that rural people must be able to obtain stable jobs and to be pleasant without leaving rural area, and rural settlement to be able to enjoy urban advantages must be realized. Therefore, items that must be obtained basically rural area to be a human settlement space are equipment connected with a dwelling house, production, consumption, job relaxation, infrastructure connected with transportation or communication network and environment. By the way, the best function of a human settlement space makes a basic pleasant settlement area to be in the middle of that. Then rationalization of land use must be realized as being a best condition for human life around space of a dewelling house. Besides, spacial accessibility about all equipment of inhabitants must be easy. That is, economic distance, social distance and cultural distance as well as spacial distance must be included. Also, those spacial functions must be realized on a basis of suitable enironment for a human settlement life. At the same tiem, the upper area must be connected with the lower area as the system of spacial settlement in settlement space. But truely, as rural people can't satisfy with services of the surrounding rural areas, they desire better city or metroplitan. The these problems bring about inequality between urban and rural. Therefore, here are urgent reasons that must be done rearing of rural central town and rural integrated development of unit area. So, these dys, to correct maldistribution of land use and inequality of settlement space that Korean society faces on, new strategies of rural integrated development for lift area for settlement than gives the meaning. That rural areas become like a place for human settlement life will be able to be chosen in the view of humanism. The say of thinking of rural residents(Jukans-myun, Anseong-gun, Kyeonggi-do) was surveyed in order to develop new rural settlement planning. From the data collected in this survey, rural life-style, view on traditional rural life, agriculture, farming, agri-policy, social attitude, and degree of satifaction of rural life, etc, were analyzed. Firstly, most of rural residents interviewed in this survey have the opinion of not leaving their home village if living conditions improved to a reasonable level in the near future. In decision-making process of village affairs, they want to participate actively and equally. Secondly, in spite of their acceptance of agriculture as a vital sector destined to national security, most of them think that framing should be little of promise. Thirdly, they have the negative attitude to urban-oriented social valued and also to the agricultural policy, while seeking consolation through human and traditional viewing of rural life style. Therefore, in the development of new rural settlement model, idea-making should be directed to the betterment of communal value of village life, stability of rural economy, rationalization of rural life style and enhancement of rural-type happiness.

다량의 하부위장관출혈이 병발된 Vibrio vulnificus 패혈증 1예

최주연,유진홍,한석원,이대훈,최민호,박순민,김연식,김선우,신완식,강문원,강성구 대한화학요법학회 1996 대한화학요법학회지 Vol.14 No.2

최근 저자들은 Vibrio vulnificus 감염에 의해 패혈증 및 이차성 피부 병변을 보인 42세의 남자 환자의 치료중 하부 위장관 출혈이 병발된 1예를 경험하였기에 보고하는 바이다. We experienced a case of Vibrop vulnificus septicemia which showed an unusual manifestation such as hematochezia. The patient was a 42-year-old man with chronic liver disease. The blood and wound culture revealed the organism. During intensive care, he suffered from massive hematochezi for several days. Colonoscopy and abdominal CT showed findings suspicious of ischemic colitis. To our knowledge, this is the first unusual case of V.vulnificus infection which showed massive lower gastrointestinal bleeding.

40ㆍ50대 일부 남성근로자의 골감소증 및 골다공증 유병실태와 위험요인

장윤균,서현주,진영우,정미선,성숙희,박두용,김종순,김수근 大韓産業醫學會 2006 대한직업환경의학회지 Vol.18 No.2

목적: 최근 국내에서도 골다공증과 관련된 생활양식의 규명에 관한 연구가 이루어지고 있으나, 아직까지 남성 골다공증에 대한 연구가 활발하게 이루어지지 않아 40, 50대 남성근로자를 대상으로 유병률을 파악하고, 골감소증 및 골다공증 관련 위험요인을 확인하고자 하였다. 방법: 원자력발전소에 근무하는 40, 50대 남성 근로자 2,073명을 대상으로 2004년 3월~7월 기간동안 생활습관을 파악하기 위하여 자기기입식 전산입력 방식으로 최종학력, 흡연여부, 음주여부, 신체활동 횟수를 조사하였고, 골밀도검사, 체성분검사(체지방률, 허리-엉덩이둘레비), 신체계측(신장, 체중)을 시행하였고, 골밀도 검사는 Osteosys사의 EXE-3000을 이용하여 종골부위를 측정하였고, 체지방률, 허리-엉덩이 둘레비는 Biospace사의 Inbody 3.0을 이용하여 측정하였다. 통계분석은 골감소증 및 골다공증의 관련요인을 분석하기 위해 다중로지스틱회귀분석을 시행하였다. 결과: 연구대상자의 골감소증 및 골다공증 유병률은 22.8%와 3.0%이었으며, 골감소증 및 골다공증의 관련요인으로는 연령이 증가할수록, 흡연자이거나 과거흡연자일 경우, 체질량지수가 25 kg/m^(2) 미만일 경우, 30분 이상 신체활동 횟수가 주 3회 미만일 경우가 유의한 연관성이 있었다. 결론: 성인 남성 40, 50대의 골감소증 및 골다공증의 유병률이 높은 편이었으며, 골감소증 및 골다공증으로 이환을 예방하기 위하여 금연, 활발한 신체활동을 촉진하여 골밀도를 개선시키는 생활습관으로의 변화를 권고해야 할 것이다. Objective: This study was conducted to investigate the prevalence and risk factors of osteopenia and osteoporosis in 40-59 year-old male workers working at nuclear power plants. Methods: Bone density, body composition, and anthropometry data were analyzed for 2,073 subjects were carried out from March 2004 to July, 2004. Educational level, smoking status, drinking status and frequency of physical activity were investigated by self-reported questionnaires through internet to identify lifestyles related to bone mass density. Bone mass density was measured by EXE-3000 of Osteosys Co. And body fat percentage, and waist-to-hip ratio by inbody 3.0 of Biospace Co. Results: The prevalence of ostepeniaosteopenia and osteoporosis was 22.8% and 3.0%, respectively. According to multinominal multinomial logistic regression analysis, age, smoking status (current smoker and former smoker), low body mass index (< 25kg/m^(2)), and frequency of physical activity were significantly associated with osteopenia and osteoporosis. Conclusions: The prevalence of ostcopenia and osteoporosis wasseemed high for the, when it was inferred from subjects' age compared to the results of previous studies. The This study results suggeststhat it is necessary for 40-59 year-old male workers to stop smoking, and exercise regularly in order to prevent osteopenia and osteoporosis.

공구형상이 칩유동에 미치는 영향에 관한 연구

김경우,김우순,윤주식,채왕석,김동현 한국공작기계학회 2000 한국공작기계학회 추계학술대회논문집 Vol.2000 No.-

A new methodology is presented to evaluate material properties at high strain rates and high temperatures based on orthogonal metal cutting experiments and FEM simulations. Average strain rate and average temperature found in the deformation zone are computed and flow stress data at these conditions are modified until cutting forces calculated in simulations match those determined in experiments. Material properties obtained from this method were verified by additional metal cutting simulations. Derivation from cutting forces measured in experiments was less than 10%. The feasibility of tool design using FEM simulations is also demonstrated.

만성 B형 간염 환자의 급성 악화 후 발생한 피부 결절 다발동맥염과 류마티스관절염

이주현,김민,이준성,장선희,윤보영,이윤우 인제대학교 2009 仁濟醫學 Vol.30 No.-

Cutaneous polyarteritis nodosa(CPAN) is a rare vascular disorder that affects small and medium-sized arteries in the reticular dermis and subcutaneous tissue. It has been described as a distinct clinical entity with benign and a chronic prolonged course without systemic involvement. Hepatitis B virus-related polyarteritis nodosa (HBV-related PAN) is typical form of classic PAN. Its pathogenesis is not well known, but considered an immune complex-mediated disease. The patients with HBV-related PAN often present with malignant hypertension, orchitis, and vascular nephropathy. But, HBV-related CPAN has been rarely reported. Rheumatoid vasculitis is a complication of rheumatoid arthritis that can be lead to variety of clinically significant skin and systemic conditions, It has been reported before or at the time of rheumatoid arthritis diagnosis but is usually seen an average of 10 to 14 years after arthritis onset. The histological features of cutaneous vasculitis in rheumatoid arthritis overlapped both the characteristics of cutaneous necrotizing venulitis and cutaneous polyarteritis nodosa. But polyarteritis nodosa-like rheumatoid vasculitis has rarely been reported. We report a case of rheumatoid arthritis and cutaneous polyarteritis nodosa in a chronic hepatitis B with acute exacerbation.

Continuous Wave of Condensation Technique으로 근관충전시 치근면 온도상승 분석

김영주,황윤찬,김선호,황인남,최보영,정영진,정우남,오원만 전남대학교 치의학연구소 2003 구강과학 Vol.15 No.4

This study was conducted to evaluate safety to the supporting tissues of the root while the root canal is obturated using continuous wave of condensation technique. A extracted maxillary central incisor was prepared for repeated canal obturation. After conventional access opening, working length was then established to the point 1㎜ from anatomical root apex. The root canal was prepared with GT rotary Ni-Ti file (Dentsply Maillefer, Switzerland). Five thermocouples (Onega Engineering Inc., USA) were placed at 2㎜ increments on one side beginning 1㎜ from the anatomical root apex and the other five thermocouples at 2㎜ increments on the other side beginning 2㎜ from it. For obturation, a nonstandardized medium size gutta-percha cone and a ML Buchanan plugger (Analytic technologies, USA) were selected. After drying of root canal, AH 26 root canal sealer (Dentsply Detrey, Germany) was applied on the wall of the root canal. Baseline temperature was measured on the root surface. The ML size plugger was preheated for 2seconds and then the real temperature of it was recorded before insertion into the root canal. The root canal was obturated with continuous wave of condensation technique as described by Buchanan. The root surface temperature was recorded during obturation and it was performed ten times at each of the following temperature settings: 150℃, 200℃, 250℃ and 300℃. After completion of the temperature recording, the dentinal-cementum thickness at each sites where thermocouples were attached was measured. The data were analyzed using one-way ANOVA followed by Scheffe's test and linear regression test. The results were as follows. 1. When the temperature was set at 150℃, 200℃, 250℃ and 300℃ on the digital display of System B HeatSource, the real temperature of the plugger at the 1㎜ point from the tip revealed 130.82±2.96℃, 158.00±5.26℃, 215.92±6.91℃ and 249.88±3.65℃ respectively. 2. The position of 8 ㎜ from the anatomical apex showed the highest temperature increase at each temperature settings and it was significantly higher than those of other positions (p<0.01). The temperature rise was constantly increased toward coronal portion from apex of the root. 3. The maximum temperature increase on the root surface was 2.37±0.09℃ at 150℃ setting, 3.11±0.12℃ at 200℃ setting, 3.93± 0.09℃ at 250℃ setting and 5.69± 0.15℃ at 300℃ setting. These results suggest that it be relatively kind to the supporting tissues of the root that the root canal is obturated using continuous wave of condensation technique at 150℃, 200℃, 250℃ and 300℃ temperature settings on digital display of System B HeatSource.

日本의 敎員養成制度 改革

李相魯,姜信珠,安泰潤,奇宇恒 慶北大學校 師範大學 1985 敎育硏究誌 Vol.27 No.-

It is said that Korean teacher education is facing some critical Problems. We think that we can get some imformations from the reexaminations on the recent reforms in Japaness teacher education system. 1) As the basic orientation of teacher education, we need to distinguish open system and closed system; teacher education in all college level and teachers college level. Institutional improvements should be directed to democratization and specialization; abuses in massproductive teacher education are required to correct. 2) In principle, teacher education should be enforced solely in regular college level; through strengthening teaching method course, teaching subject courses, and student teaching practices, professionally of teacher education must be elivated. 3) As teacher education heavily depends upon teacher employment directly or indirectly, the plan of the teacher demand and supply is needed to be reasonable. And incentive systems for teachers are demanded. 4) In-service education should be qualified to enhance the autonomy of teaching profession. 5) The Co-research between colleges, educatibnal institutes, and schools is expected to strengthen and enlarge action research.

과도 절삭에서의 절삭 공정 시뮬레이션

고정훈,조동우,윤원수,김주한 한국공작기계학회 2001 한국공작기계학회 춘계학술대회논문집 Vol.2001 No.-

In most of the existing mechanistic models, the cutting process simulation is often restricted to a single path machining operation under a fixed cutting condition. Complex cutting processes such as die or mold manufacturing, however, are performed under two- or three-dimensional multiple tool paths. Since the tool paths in CNC machining are composed of line and arc segments, transient cuts are frequently occured due to the multiple paths. Even in steady cuts, the width of cut is varied with each segment. In this regard, this paper deals with the development of process simulation system for transient cuts, where continuously changing cutting configuration is computed, and then the cutting forces are predicted.