http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
오주선 ( Jooseon Oh ),한현우 ( Hyunwoo Han ),김지태 ( Ji-tae Kim ),박영준 ( Young-jun Park ) 한국농업기계학회 2019 한국농업기계학회 학술발표논문집 Vol.24 No.1
농용 트랙터 운전자는 작업 특성상 반복적이고 높은 수준의 진동에 장기간 노출되기 때문에 피로 누적, 요추 통증, 목 부위 통증 등의 근골격계 질환에 걸릴 위험이 높다. 따라서 운전자에게 노출되는 진동의 수준을 저감할 수 있는 트랙터의 개발이 필요하다. 트랙터 승차 진동 저감을 위한 가장 높은 기술이라고 판단되는 캐빈 서스펜션은 아직 국내 기술로 개발되지 않았으며, 장착된 트랙터 역시 전무하다. 그에 반해 해외의 트랙터에는 100마력 이상의 고급 트랙터에는 이미 적용되어 판매되고 있다. 이에 캐빈 서스펜션이 장착된 트랙터가 고무 마운팅이 장착된 트랙터에 비해 갖는 성능적 우위를 시험을 통해 검증하였다. 트랙터의 캐빈 서스펜션 시스템은 대부분 포장도로 주행 시 사용된다. 따라서 승차 진동 시험은 트랙터가 포장도로를 주행할 때 경험할 수 있는 평탄 노면 주행과 범프(bump) 통과 주행으로 구분하여 수행하였다. 또한 주행 속도가 승차 진동에 미치는 영향을 구명하기 위하여 주행 속도를 10, 20, 30 km/h의 3단계로 구분하여 시험하였다. 범프 통과 시험의 경우, 7 km/h 이상의 고속 조건에서는 수직 진동이 과도하여 승차 진동 측정이 불가능하였으며 7 km/h 이하의 저속 조건에서는 주행 속도에 따른 진동의 변화가 크지 않았다. 따라서 범프 통과 시험은 주행 속도를 7 km/h 로 고정하여 시험하였다. 시험은 각 조건별로 3회 반복하였으며 획득한 데이터 중 중간값을 대푯값으로 사용하였다. 시험 결과 캐빈 서스펜션을 장착할 경우, 평탄한 노면에서 30 km/h로 주행할 때 총 진동 수준이 최대 53.8%의 개선이 있음을 확인하였다. 또한 범퍼 주행 시험에서는 66.2%의 승차 진동 개선을 확인하였다. 이를 통해 캐빈 서스펜션 시스템은 승차 진동을 개선하는데 효과가 있는 것으로 판단된다. 또한 Passive 서스펜션보다 Semi-Active 서스펜션의 승차 진동이 더 작게 나타나는 것을 확인하였다.
토양소독액 자동분사 제어를 위한 노즐 특성에 대한 연구 Ⅰ - 해석
오주선 ( Jooseon Oh ),유한주 ( Han-ju Yoo ),박두산 ( Tusan Park ),심성보 ( Sung-bo Shim ) 한국농업기계학회 2021 한국농업기계학회 학술발표논문집 Vol.26 No.2
토양 소독기는 토양 훈증제 등 약제를 토양에 주입하는 기계로서 토양 중에 서식하는 해충 토양 선충을 방제하는 효과가 크다. 토양 소독기에서 사용되는 약제의 종류에 따라 물리적 특성이 다르기 때문에 토양 소독기의 분사량, 분사속도 등은 약제의 물리적 특성을 고려하여 결정해야 한다. 본 연구에서는 토양소독액 자동분사 제어로직 설계를 위한 토양소독기 노즐부의 시뮬레이션 모델을 개발하였다. 시뮬레이션 모델은 노즐의 열림양에 따른 유체의 분사량을 구현하는 것을 목표로 하였으며 이를 CFD 해석 모델과 비교하여 유효성을 검증하였다. 또한 선정한 모터와 밸브 등의 사양에 대한 적합성을 확인하였으며, 입력 조건 변화에 대한 분사량 변화 역시 검증하였다.
Experimental Study of the Dynamic Characteristics of Rubber Mounts for Agricultural Tractor Cabin
( Kyujeong Choi ),( Jooseon Oh ),( Davin Ahn ),( Young-jun Park ),( Sung-un Park ),( Heung-sub Kim ) 한국농업기계학회 2018 바이오시스템공학 Vol.43 No.4
Purpose: To obtain the dynamic characteristics (spring stiffness and damping coefficient) of a rubber mount supporting a tractor cabin in order to develop a simulation model of an agricultural tractor. Methods: The KS M 6604 rubber mount test method was used to test the dynamic characteristics of the rubber mount. Of the methods proposed in the standard, the resonance method was used. To perform the test according to the standard, a base excitation test device was constructed and the accelerations were measured. Results: Displacement transmissibility was measured by varying the frequency from 3-30 Hz. The vibration transmissibility at resonance was confirmed, and the dynamic stiffness and damping coefficient of the rubber mount were obtained. The front rubber mount has a spring constant of 1247 N/mm and damping ratio of 3.27 Ns/mm, and the rear rubber mount has a spring constant of 702 N/mm and damping ratio of 1.92 Ns/mm. Conclusions: The parameters in the z-direction were obtained in this study. In future studies, we will develop a more complete tractor simulation model if the parameters for the x- and y-directions can be obtained.
Experimental Study of the Dynamic Characteristics of Rubber Mounts for Agricultural Tractor Cabin
Choi, Kyujeong,Oh, Jooseon,Ahn, Davin,Park, Young-Jun,Park, Sung-Un,Kim, Heung-Sub Korean Society for Agricultural Machinery 2018 바이오시스템공학 Vol.43 No.4
Purpose: To obtain the dynamic characteristics (spring stiffness and damping coefficient) of a rubber mount supporting a tractor cabin in order to develop a simulation model of an agricultural tractor. Methods: The KS M 6604 rubber mount test method was used to test the dynamic characteristics of the rubber mount. Of the methods proposed in the standard, the resonance method was used. To perform the test according to the standard, a base excitation test device was constructed and the accelerations were measured. Results: Displacement transmissibility was measured by varying the frequency from 3-30 Hz. The vibration transmissibility at resonance was confirmed, and the dynamic stiffness and damping coefficient of the rubber mount were obtained. The front rubber mount has a spring constant of 1247 N/mm and damping ratio of 3.27 Ns/mm, and the rear rubber mount has a spring constant of 702 N/mm and damping ratio of 1.92 Ns/mm. Conclusions: The parameters in the z-direction were obtained in this study. In future studies, we will develop a more complete tractor simulation model if the parameters for the x- and y-directions can be obtained.
토양소독액 자동분사 제어를 위한 분사 특성에 대한 연구 Ⅱ - 실험
유한주 ( Hanju Yoo ),오주선 ( Jooseon Oh ),박두산 ( Tusan Park ),심성보 ( Sungbo Shim ) 한국농업기계학회 2021 한국농업기계학회 학술발표논문집 Vol.26 No.2
토양 병해충은 밭작물 생산성 저하의 원인이 되므로, 윤작 혹은 토양 소독을 통해 적절한 토양 관리를 실시하고 있다. 윤작은 2가지 이상의 작물을 돌려가면서 농사를 짓는 방법으로 토지 이용도를 높이고, 반복 재배에도 균형 잡힌 토질을 유지할 수 있으나, 국내 농가 규모에는 부적절한 방식으로 널리 사용되지 못하고 있다. 토양 소독 방식 중 열처리 방식은 비용이 많이 들고 사용되는 장치 자체가 크므로, 상대적으로 재배 규모가 큰 환경에 적합한 방식으로 분류된다. 화학 약품을 살포하는 방식은 지중에 소독액을 살포하고 비닐로 덮어 훈증ㆍ소독하는 방법으로, 경제적이고 소규모 농업에도 적합하다. 그러나, 작업자가 소독액에 직접 노출되므로 작업자 안전과 작업 편의를 위해, 경운ㆍ소독액 분사ㆍ비닐피복이 동시에 진행할 수 있는 농기계 자동화 연구가 진행되고 있다. 본 논문에서는, 소독액 권장 도포량을 따르며 트랙터 차속에 따라 분사량이 제어되는 장치를 개발을 위해, 제어 변수를 설정하고 변수 간 특성을 확인하는 실험적 연구 결과를 제시한다. 제어 변수로는 트랙터 차속, 제어 모터 회전속도에 따른 분사 유량-분사 압력과 노즐 경으로 설정하였으며, 실험 결과는 분사량 자동제어 알고리즘 개발을 위한 기초 데이터로 활용할 것이다.
이동건 ( Donggun Lee ),오주선 ( Jooseon Oh ),유한주 ( Han-ju Yoo ),심성보 ( Sung-bo Shim ) 한국농업기계학회 2022 한국농업기계학회 학술발표논문집 Vol.27 No.2
경사지가 많은 밭 농업 환경에서 농기계를 이용하는 경우 농기계가 전도될 가능성이 높다. 경사지에서 주행체의 안정성을 확보하는 것은 농기계의 안전사고 예방에 기여할 수 있으므로 이와 관련된 연구는 필수적으로 수행되어야 한다. 트랙터의 전도 관련 연구는 활발히 진행되어 왔지만 소형 노지용 주행체의 전도 관련 연구는 상대적으로 부족한 실정이며, 제작 및 이용에 대한 가이드라인이 미흡하다. 소형주행체는 차체 위에 농작물을 적재하여 견인하는 형태로서 후방에 트레일러를 연결하여 농작물을 적재하는 트랙터와는 구조가 다르며, 주행체의 크기가 트랙터에 비해 작기 때문에 별도로 연구를 수행해야 할 필요가 있다. 본 연구에서는 노지용 소형 주행체의 후방 전도 및 측방 전도의 특성을 정리하였다. 이를 바탕으로 주행체의 후방전도 및 측방전도 안전성 분석을 각각 세 가지 케이스로 분류하여 수행하였다. 후방전도 안정성 분석을 위해 전륜이 들리는 경사각에 따른 임계 각속도를 도출하였으며, 측방전도 안정성 분석을 위해 주행체의 조향각에 따른 임계주행속도를 도출하였다.
Han-Ju Yoo,Jooseon Oh,Sung-Bo Shim 충남대학교 농업과학연구소 2023 Korean Journal of Agricultural Science Vol.50 No.4
Deteriorating soil physical properties and increasing soil pathogens due to the continuous cultivation of field crops are the leading causes of productivity deterioration. Crop rotation, soil heat treatment, and chemical control are used as pest control methods; however, each has limitations in wide application to domestic agriculture. In particular, chemical control requires improvement due to direct exposure to sterilizing solution, odor, and high-intensity work. To improve the overall domestic agricultural environment, the problems of time and cost, such as field maintenance and cultivation scale, must be addressed; therefore, mechanization technology for chemical control must be secured to derive improvement effects in a short period. Most related studies are focused on the control effect of the DMDS (dimethyl disulfide) sterilizer, and research on the performance of the sterilization spray device has been conducted after its introduction in Korea, but research on the corrosion suitability of the material is lacking. This study conducted a corrosion test to secure the corrosion resistance of a soil sterilizer injection pump, and a mechanical failure mode by corrosion by the material was established. The corrosion test comprised operation and neglect tests in which the sterilizing solution was circulated in the pump and remained in the pump, respectively. As a result of the corrosion test, damage occurred due to the weakening of the mechanical strength of the graphite material, and corrosion resistance to aluminum, stainless steel, fluororubber, and PPS (polyphenylene sulfide) materials was confirmed.