Genetic Variations of the Apolipoprotein B Gene in Korean People and Its Association with Hypercholesterolemia

Sung Han Kim,Un Kyung Kim,Jae Jin Chae,Jeong In Baek,Soo Young Choi,Jae Woong Bae,Sang Hyun Kim,Hyo Soo Kim 한국유전학회 2008 Genes & Genomics Vol.30 No.5

Genetic polymorphisms at the apolipoprotein B have been associated with elevated plasma concentrations of LDL, atherosclerosis and increased risk of coronary artery disease. 106 individuals composed of 46 hypercholesterolemic patients and 60 controls were analyzed with Ins/Del length polymorphism, four RFLPs (HincII, PvuII, AluI, EcoRI) and 3`-VNTR to clarify the characteristics of the apolipoprotein B gene and to determine their influence on the lipid profile of hypercholesterolemic patients and controls in Korea. A total of 212 apolipoprotein B alleles from six markers were identified in this study. Heterozygosityranges from zero to 0.32, and the genotyope frequencies in the case of 3`-VNTR are significantly different between two groups. Analysis of linkage disequilibrium revealed paired nonrandom associations between four pairs of polymorphic sites of the apolipoprotein B gene (p<0.05). Moreover, addition of all 4 polymorphic sites provided the highest PIC value. This study also investigated the association of these polymorphisms with the patients and with variation in lipid levels. A significant association between 3`-VNTR genotypes and Lp(a) was observed in hypercholesterolemic patients (p<0.05). The results suggest that genotypes of six polymorphic markers were not significantly associated with TC, TG or LDL-chol level between the patients and controls in the Koreans.

Tuberculosis risk is associated with genetic polymorphisms in the LRP2, CUBN, and VDR genes

Sung‑Soo Kim,Sang In Lee,Hyun‑Seok Jin,Sangjung Park 한국유전학회 2020 Genes & Genomics Vol.42 No.10

Background Vitamin D (Vit. D) is used extensively during tuberculosis treatment. Low levels of serum Vit. D increase the risk of active tuberculosis development. Altered expression of the proteins involved in Vit. D metabolism impairs cathelicidin production, thereby increasing the host susceptibility to tuberculosis. Objective We are trying to investigate whether single nucleotide polymorphisms (SNPs) in LRP2, CUBN, and VDR genes could afect tuberculosis development. Methods We included participants of the Korean Association Resource (KARE), part of the Korean Genome and Epidemiology Study (KoGES), and used their recorded data. A total of 8840 people (4182 men and 4658 women) were eligible subjects. The 5-kb regions from the ends of transcripts of GC, LRP2, CUBN, and VDR genes were amplifed to select 13, 47, 70, and 15 SNPs, respectively. For association analysis and statistical analysis, PLINK version 1.07 and PASW Statistics version 18.0 were used. Results Signifcant correlation was observed in 11, 2, and 1 SNPs in LRP2, CUBN, and VDR genes. The efect of rs6747692 of LRP2 on transcription factor binding was confrmed using RegulomeDB. We confrmed that rs2239182 of VDR is located in the genomic eQTL region and can afect transcription factor binding and gene expression. Conclusions Genetic polymorphisms in genes encoding proteins involved in Vit. D metabolism infuence immune system components. Therefore, such polymorphisms may infuence the susceptibility to Mycobacterium tuberculosis invasion and alter the defense mechanisms against Mycobacterium tuberculosis infection. The correlation between genetic variation and tuberculosis development can provide new guidelines for the management of tuberculosis.

In-situ fabrication of TiC-Fe₃Al cermet

Kim, Yong-In,Seok An, Gye,Lee, Wonsik,Man Jang, Jin,Park, Bong-Geun,Jung, Yeon-Gil,Choi, Sung-Churl,Ko, Se-Hyun Elsevier 2017 CERAMICS INTERNATIONAL Vol.43 No.8

<P><B>Abstract</B></P> <P>Titanium carbide has high hardness, resistance to oxidation and abrasion while iron aluminide has proper ductility as well as good strength and excellent oxidation resistance up to high temperatures. Therefore, it can be expected TiC-iron aluminide cermet to have excellent mechanical properties as a cutting tool and a wear-resistance material. In this study, mechanical milling and hot press sintering processes were used to manufacture in-situ TiC-Fe<SUB>3</SUB>Al cermet, whose microstructure and mechanical properties were examined according to the changes in volume fraction of TiC and milling time. After 48h of milling each mechanically alloyed powder crystallized in a TiC and Fe<SUB>3</SUB>Al biphasic material. The milled powder was hot-pressed at 1250℃ and 50MPa for 30min to obtain sintered bodies also consisting of only TiC and Fe<SUB>3</SUB>Al phases. The hard phase, TiC, had a size of 100–300nm with overall uniform distribution decreasing as the volume fraction of TiC increased. The hardness of each sintered body showed a linearly increasing tendency according to the increase in TiC content, the hardness for 90vol% TiC cermet being as high as 1813Hv. On the other hand, the bending strength was 1800MPa and 1780MPa when TiC volume fraction was 50% and 70%, respectively, while it showed an abrupt decrease up to 580MPa at 90% TiC volume fraction. Fe<SUB>3</SUB>Al phase is effective to toughening of TiC-Fe<SUB>3</SUB>Al cermet and the volume fraction of Fe<SUB>3</SUB>Al phase significantly influences the bending strength of the cermet.</P>

In-hospital mortality in patients with STEMI admitted during off hours

( Sung-Soo Kim ),( Myung Ho Jeong ),( Jeong Gwan Cho ),( Young Keun Ahn ),( Jong Hyun Kim ),( Shung Chull Chae ),( Young Jo Kim ),( Seung Ho Hur ),( In Whan Seong ),( Taek Jong Hong ),( Dong-hoon Choi 대한내과학회 2013 대한내과학회 추계학술대회 Vol.2013 No.1

Conflicting results exist on the outcome of off hours PCI in ST elevation myocardial infarction (STEMI). However, there were only a few studies that have focused on the clinical characteristics and outcomes of off hours PCI in STEMI. So, we studied the clinical characteristics and hospital mortality in STEMI patients treated with primary PCI during regular hours (weekdays 9:00 AM to 6:00 PM) versus off hours Weekdays 6:01 PM to 8:59 AM, weekends, and holidays) in Korea Acute Myocardial Infarction Registry. We analyzed in hospital and one year mortality among 5,665 consecutive ST segment elevation myocardial infarction patients treated with primary PCI between November 2005 to January 2008. Total 2,848 (50.2%) patients were treated during off hours. Baseline finding were similar, although regular hours patients were older. Median symptom to balloon time (304 min, IQR 175 to 750 vs. 270 min, IQR 145 to 551, p=0.001) were longer for regular hours primary PCI. Median door to balloon time (71min, IQR: 48 to 132 vs. 59 min, IQR 39 to 110 min, p=0.001) were longer for off hours pPCI. Also, Cardiac enzyme such as Max CK-MB (212.1±299.3 vs 194.7±303.4, p=0.031) and max TnI (72.6±239.5 vs. 58.9±94.4, p=0.013) were increased in off hours pPCI. However, unadjusted in hospital (6.0% off hours vs. 6.0% regular hours, p=0.946) and one year cardiac mortality (11.3% off hours vs. 11.7% regular hours, p=0.661) were comparable. In multivariate analysis, off hours primary PCI did not predict an adverse outcome. In conclusion, when primary PCI was performed within an appropriate reperfusion strategy, the clinical effectiveness of either off hours or regular hours pPCI is comparable.

Validation of Sea Surface Temperature (SST) from Satellite Passive Microwave Sensor (GPM/GMI) and Causes of SST Errors in the Northwest Pacific

Kim, Hee-Young,Park, Kyung-Ae,Chung, Sung-Rae,Baek, Seon-Kyun,Lee, Byung-Il,Shin, In-Chul,Chung, Chu-Yong,Kim, Jae-Gwan,Jung, Won-Chan The Korean Society of Remote Sensing 2018 大韓遠隔探査學會誌 Vol.34 No.1

Passive microwave sea surface temperatures (SST) were validated in the Northwest Pacific using a total of 102,294 collocated matchup data between Global Precipitation Measurement (GPM) / GPM Microwave Sensor(GMI) data and oceanic in-situ temperature measurements from March 2014 to December 2016. A root-mean-square (RMS) error and a bias error of the GMI SST measurements were evaluated to $0.93^{\circ}C$ and $0.05^{\circ}C$, respectively. The SST differences between GMI and in-situ measurements were caused by various factors such as wind speed, columnar atmospheric water vapor, land contamination near coastline or islands. The GMI SSTs were found to be higher than the in-situ temperature measurements at low wind speed (<6 m/s) during the daytime. As the wind speed increased at night, SST errors showed positive bias. In addition, other factors, coming from atmospheric water vapor, sensitivity degradation at a low temperature range, and land contamination, also contributed to the errors. One of remarkable characteristics of the errors was their latitudinal dependence with large errors at high latitudes above $30^{\circ}N$. Seasonal characteristics revealed that the errors were most frequently observed in winter with a significant positive deviation. This implies that SST errors tend to be large under conditions of high wind speeds and low SSTs. Understanding of microwave SST errors in this study is anticipated to compensate less temporal capability of Infrared SSTs and to contribute to increase a satellite observation rate with time, especially in SST composite process.

Skin Safety of the UV Absorbers by Measurement Cytotoxicity High Functional Product with Water-In-Silicone System

( Kim In-young ),( Kim Min-ho ),( Nam Sang-in ),( Chun Kil Whan ) 대한화장품학회 1997 대한화장품학회지 Vol.23 No.3

Consumers have recently preferred to purchase extensive UV intercepting products, which are waterproof and free from side effects on skin. Testing Cytotoxicity (in-vitro) in SK method, cell survival ratio of UV-B interceptors decreased above 0.08W/V%, and so did that of UV-A interceptors above 0.06W/V%. Also, Patch-test of inorganic UV interceptors resulted in no skin irritation ever below 10.0 and 11.25. UV interceptors in the sunlight showed yellowish discoloration in 5 to 14 days. In absorption curves, UV-B was most suitable for Octyl methoxycinnamate (OMC) and UV-A for Butyl methoxy dibenzoylmethane (BMDM). For this reason, Nylonpoly UVA/UVB the material of OMC and BMDM coated with Nylon & polyethylene, was used as the organic UV interceptor. And zinc oxide (ZnO) and titanium dioxide (TiO,) was used as inorganic UV interceptors. The appropriate mixture ratio of ZnO and TiO, was 6 to 4. 6% of ZnO, 4% of TiO, and 5% of Nylonpoly UVA/UVB were all combined with our sunscreen cream. The SPF value of in-vivo applied to a guinea pig was 34.9 and that of in-vivo was 38.5. Cyclomerhicone and dimethicone were used in water-in-Silicone system. Ceryl dimethi-cone and sorbitan sesquiolente were used as emulsifiers and MgSO, · 7 H₂O, Mg-stearate/Mg-Al-stearate copolymer as emulsification stabilizers. In practical application, each SPF duration of O/’W type and W/S type containing sunscreen cream of the same content showed that W/S type of sunscreen cream was 5 times as durable as the other. This product is fit for using in swimming, climbing or skiing. This research is to minimize skin trouble caused by UV interceptors and to make one with proper softness, skin safety and UV intercepting efficiency.

<i>In vitro</i> and <i>in vivo</i> evaluation of a novel polymer-free everolimus-eluting stent by nitrogen-doped titanium dioxide film deposition

Park, Dae Sung,Bae, In-Ho,Jeong, Myung Ho,Lim, Kyung Seob,Sim, Doo Sun,Hong, Young Joon,Lee, So-Youn,Jang, Eun Jae,Shim, Jae-Won,Park, Jun-Kyu,Lim, Han Chul,Kim, Han Byul Elsevier 2018 Materials Science and Engineering C Vol.91 No.-

<P><B>Abstract</B></P> <P>Inflammation and thrombosis are linked to the use of polymer-based drug-eluting stents (DES). The aim of this study was to develop a polymer-free everolimus (EVL)-eluting stent using nitrogen-doped titanium dioxide (N-TiO<SUB>2</SUB>) and verify its efficacy by <I>in vitro</I> and <I>in vivo</I> assessment in a porcine coronary model. Various analytical approaches such as scanning electron microscopy and atomic force microscopy, electron spectroscopy, Fourier transform infrared spectrometry and contact angle measurement were employed for the characterization. As a part of biocompatibility assessment, platelet adhesion and smooth muscle cell (SMC) proliferation were examined. Bare metal stent (BMS), N-TiO<SUB>2</SUB> stent, everolimus-eluting N-TiO<SUB>2</SUB> (N-TiO<SUB>2</SUB>-EVL) stent, and commercialized EVL-eluting stent (EES) were randomly placed in forty coronary arteries in twenty pigs. After four weeks of implantation, the stents were subjected to histological and quantitative analysis. The N-TiO<SUB>2</SUB> film used in this study was well coated without any cracks or peeling. Surface hydrophilicity (88.8% of angle decrement) could be associated with the decrease in surface roughness post N-TiO<SUB>2</SUB> deposition (37.0%). The platelet adhesion on the N-TiO<SUB>2</SUB> surfaces was less than that on the BMS surface. The proliferation of SMC was suppressed in the N-TiO<SUB>2</SUB>-EVL group (30.2%) but not in the BMS group. In the animal study, the percent area restenosis was significantly decreased in the N-TiO<SUB>2</SUB>-EVL group compared to that in the BMS group. The results (BMS; 47.0 ± 11.00%, N-TiO<SUB>2</SUB>-EVL; 31.7 ± 10.50%, and EES; 29.1 ± 11.21%, <I>n</I> = 10, <I>p</I> < 0.05) were almost at par with those of the commercialized EVL-eluting stent. The introduction of N-TiO<SUB>2</SUB> deposition during fabrication of polymer-free DES may be an efficient accessorial process for preventing in-stent restenosis and thrombosis.</P> <P><B>Highlights</B></P> <P> <UL> <LI> N-TiO<SUB>2</SUB> surfaces can help to reduce the platelet adhesion. </LI> <LI> In porcine model, N-TiO<SUB>2</SUB> everolimus decreased in-stent restenosis and fibrin deposition. </LI> </UL> </P>

The Effect of Rosiglitazone on the Cell Proliferation and the Expressions of p27 and Skp2 in<i>Helicobacter pylori</i>Infected Human Gastric Epithelial Cells

Kim, Sung-Soo,Cho, Young-Seok,Kim, Hyung-Keun,Shin, Ok-Ran,Chae, Hiun-Suk,Choi, Myung-Gyu,Chung, In-Sik The Korean Society of Gastroenterology 2010 대한소화기학회지 Vol.55 No.4

<P>Background/Aims: Ligands for peroxisome proliferator-activated receptorgamma (PPARgamma), a member of the ligand-activated nuclear receptor superfamily, exhibit anti-tumoral effects and are associated with de novo synthesis of proteins involved in regulating the cell cycle and cell survival/death. Helicobacter pylori (H. pylori) is an etiologic agent for gastric adenocarcinoma, and raises the cell turnover of gastric epithelium. The aim of this study was to investigate the effect of PPARgamma ligand rosiglitazone on the cell proliferation and the expressions of p27 and Skp2 protein in H. pylori infected gastric epithelial cells. Methods: We examined the expression of PPARgamma by Western blot in H. pylori infected AGS human gastric epithelial cells. The effect of rosiglitazone on the survival of H. pylori infected AGS cells was assessed by cell viability assay. After the treatment of rosiglitazone in H. pylori infected AGS cells, the expressions of p27 and Skp2 were assessed by Western blot. Results: The expression of PPARgamma protein was increased in H. pylori infected AGS cells. Cell growth was inhibited and decreased in dose- and time- dependent manner in H. pylori infected AGS cells treated with rosiglitazone. A decrease in Skp2 expression and a reciprocal increase in p27 expression were found in dose- and time-dependent manner in H. pylori infected AGS cells treated with rosiglitazone. Conclusions: Rosiglitazone inhibited the growth of H. pylori infected AGS cells. Rosiglitazone attenuated Skp2 expression, thereby promoting p27 accumulation in H. pylori infected human gastric epithelial cells. Further studies will be needed to find the effects of accumulation on cell turnover in H. pylori infection and the role in the H. pylori-associated gastric carcinogenesis.</P>

Proteomics of ionic stresses in rice: An overview

Kim, Sang-Gon,Wang, Yiming,Huh, Hyun-Hye,Kim, Yong-Chul,Choi, In-Soo,Agrawal, Ganesh Kumar,Rakwal, Randeep,Kang, Kyu-Young,Kim, Sun-Tae The Korean Society of Plant Biotechnology 2011 식물생명공학회지 Vol.38 No.2

Ions deficiency or excess remains one of the critical ground level environmental problems, affecting crop productivity. In this overview, we will discuss an increased application of proteomics technology in addressing this issue using rice (Oryza sativa L.) as a model crop plant. Proteomics analyses have revealed that rice proteome undergoes changes in the proteins composition and expression in response to several ionic stresses, including mineral nutrients (aluminum, nitrogen, and phosphorous) and heavy metals (arsenic, cadmium, and copper). Developed inventory of responsive proteins and their correlation with changes in physiological symptoms and parameters are a major step forward in: (i) better understanding the underlying mechanisms of ionic stresses-triggered responses in rice; (ii) comparative proteomics studies; and (iii) designing a novel strategy to improve crop plants.

In-Situ X-Ray Fluoroscopic Observation for Motion of Bubbles in Liquid Iron for Correction of Drag Coefficient Used in Numerical Simulation

In-Beom Park,Sang-Joon Kim,Hae-Geon Lee,Youn-Bae Kang 대한금속·재료학회 2016 METALS AND MATERIALS International Vol.22 No.4

Rising of Ar bubble in C-saturated liquid iron was investigated in-situ by employing a high power X-Ray fluoroscope (maximum power of 450 kV and 4.5 mA) coupled with a high speed camera. This analysis enabled to track the actual motion of rising bubble in the liquid iron. After post-processing of X-Ray images, size, shape, velocity, and trajectory of the bubble were obtained. The bubbles were found to be not spherical, but ellipsoidal. Their average size could be estimated about 1.1×10 -2 m. The bubbles wobbled during rising and arrived at their terminal velocities within 0.1 sec. The obtained terminal velocities revealed that the governing forces acting on the motion of ellipsoidal bubble were inertia and surface force. This was quite different from that of spherical bubble which was widely used in the assumption for the numerical analysis. As a result, widely applied equation for the drag coefficient (CD = 24 (1 + 0.15Re 0.687 ) / Re) is seen to be applicable only for low Re regime, and this was also confirmed by the drag coefficient derived from the present experimental observation. Therefore, it is suggested to use the following equation for the drag coefficient CD = max [24 (1 + 0.15Re 0.687 ) / Re, 8Eo / 3(Eo + 4)]. Numerical simulation for the Ar bubble behavior in the three dimensional (3D) continuous casting mold was conducted in order to evaluate the effect of the drag coefficient for the behavior of spherical and ellipsoidal bubbles. The numerical results showed that the increased CD based on ellipsoidal regime affected the entire fluid in the mold.