월악산국립공원의 곤충다양성에 관한 연구 : 노린재목, 딱정벌레목, 나비목

박성준(Seong-Joon Park),전용락(Yong-Lak Jeon),홍의정(Eui-Jung Hong),윤주창(Ju-Chang Yun),박서경(Seo-Kyoung Park),김병진(Byung-Jin Kim) 국립공원연구원 2010 국립공원연구지 Vol.1 No.3

본 연구는 2007년부터 2009년까지 3년 동안 월악산 모니터링 조사 지점과 동일지구에 대해 정기적인 주간조사를 통해 주간곤충류(노린재목, 딱정벌레목, 나비목)의 종목록을 확보 하여, 월악산국립공원의 생태계에 자연적 혹은 인위적으로 변화된 내용을 측정하여 곤충자원의 체계적인 관리를 위한 자료를 제공하고자 실시되었다. 본 조사기간 동안 채집 확인된 주간곤충류는 65과 404종(노린재목 21과 86종, 딱정벌레목 38과 244종, 나비목 6과 74종)이 조사되었다. 따라서 문헌조사를 포함한 결과 월악산국립공원에 서식하는 것으로 확인된 주간곤충류는 멸종위기야생동물 2종, 고유종 6종, 국외반출승인대상종 10종과 특정종 50종을 포함하여 총 72과 609종(딱정벌레목 44과 368종, 노린재목 22과 126종, 나비목 6과 115종)으로 나타났다. 아울러 조사지점별 분석결과 S3에서 종다양성이 가장 높게 나타났으며, S10은 다른 조사지점과 다르게 종다양성이 현저하게 떨어지는 것으로 나타났다. 각 조사기간별우점종으로는 2007년과 2009년도에 넉점박이송장벌레, 2008년도에는 더듬이긴노린재로 나타났다. This study were conducted for three years from 2007 to 2009 and at the same points as monitoring surveys, through regular surveys insects (Hemiptera, Coleoptera, Lepidoptera) to obtain the list, to measure and assess Woraksan National Park ecosystem’s natural or artificial change, to provide data for systematic management of the contents of insects. As a result of all the collections were examined, 404 species of 65 family under 3 order were identified. Therefore, the species composition of insect over each result from Woraksan National Park’s was a total of 3 orders, 72 families, 609 species including 2 Endangered species, 6 Endermic species, 10 Management of exotic species and 50 Designated species; 368 species of family Coleoptera which is the highest, 126 species of family Hemiptera and 115 species of family Lepidoptera. Site 3 had the highest indices diversity. In contrast, Site 10 indices diversity, different from the other survey points, were significantly low. In each survey period, dominant species included Nicrophorus quadripunctatus in 2007 and 2009. In 2008, dominant species was Pachygrontha antennata.

Electropulsing Treatment on Enhancement of Electrical Conductivity of Screen-Printed Ag Wire

Ju‑Won Park,Howook Choi,Hwangsun Kim,Simoon Sung,Hye‑Jin Jeong,Il Kim,Jaeseok Gong,Sung‑Tae Hong,Heung Nam Han 대한금속·재료학회 2021 METALS AND MATERIALS International Vol.27 No.5

The effect of high electric current density on the sintering of Ag wires manufactured by screen printing is evaluated throughelectrical resistivity analysis and microstructure observation. Different forms (continuous and pulsed) of electric currentwith different current densities are applied to the specimens. Conventional heat treatment is also performed as a controlgroup to examine the athermal effect of electropulsing treatment. Compared to the conventional heat treatment, the resistivityis reduced more under the electropulsing treatment with continuous current for the same temperature and treatment time.Also, the process time of electropulsing treatment can be reduced by applying a pulse form of high density current insteadof continuous current without losing the benefit of enhanced reduction of resistivity. The microstructural observationsobtained from high angle annular dark field scanning transmission electron microscope and a digital precession instrumentclearly show that necking connecting the crystals is formed more firmly under electric current. In addition, the temperaturechange of Ag wire and substrate is calculated according to the change of the resistivity when the electric current is appliedto confirm the reliability.

월악산국립공원의 곤충다양성에 관한 연구 - 노린재목, 딱정벌레목, 나비목 -

박성준(Seong-Joon Park),전용락(Yong-Lak Jeon),홍의정(Eui-Jung Hong),윤주창(Ju-Chang Yun),박서경(Seo-Kyoung Park),김병진(Byung-Jin Kim) 국립공원연구원 2010 국립공원연구지 Vol.1 No.4

본 연구는 2007년부터 2009년까지 3년 동안 월악산 모니터링 조사 지점과 동일지구에 대해 정기적인 주 간조사를 통해 주간곤충류(노린재목, 딱정벌레목, 나비목)의 종목록을 확보 하여, 월악산국립공원의 생태계에 자연적 혹은 인위적으로 변화된 내용을 측정하여 곤충자원의 체계적인 관리를 위한 자료를 제공하고자 실시되었다. 본 조 사기간 동안 채집 확인된 주간곤충류는 65과 404종(노린재목 21과 86종, 딱정벌레목 38과 244종, 나비목 6과 74종) 이 조사되었다. 따라서 문헌조사를 포함한 결과 월악산국립공원에 서식하는 것으로 확인된 주간곤충류는 멸종위기야 생동물 2종, 고유종 6종, 국외반출승인대상종 10종과 특정종 50종을 포함하여 총 72과 609종(딱정벌레목 44과 368 종, 노린재목 22과 126종, 나비목 6과 115종)으로 나타났다. 아울러 조사지점별 분석결과 S3에서 종다양성이 가장 높게 나타났으며, S10은 다른 조사지점과 다르게 종다양성이 현저하게 떨어지는 것으로 나타났다. 각 조사기간별 우점종으로는 2007년과 2009년도에 넉점박이송장벌레, 2008년도에는 더듬이긴노린재로 나타났다. This study were conducted for three years from 2007 to 2009 and at the same points as monitoring surveys, through regular surveys insects (Hemiptera, Coleoptera, Lepidoptera) to obtain the list, to measure and assess  Woraksan National Park ecosystem’s natural or artificial change, to provide data for systematic management of the contents of insects. As a result of all the collections were examined, 404 species of 65 family under 3 order were identified. Therefore, the species composition of insect over each result from Woraksan National Park’s was a total of 3 orders,  72 families, 609 species including 2 Endangered species, 6 Endermic species, 10 Management of exotic species and 50 Designated species; 368 species of family Coleoptera which is the highest, 126 species of family Hemiptera and 115 species of family Lepidoptera. Site 3 had the highest indices diversity. In contrast, Site 10 indices diversity, different  from the other survey points, were significantly low. In each survey period, dominant species included Nicrophorus quadripunctatus in 2007 and 2009. In 2008, dominant species was Pachygrontha antennata.

PLZT 세라믹을 이용한 광셔터 소자의 스위칭 특성

박창엽,유주현,홍재일 연세대학교 산업기술연구소 1988 논문집 Vol.20 No.2

In this paper, 9.5/65/35 PLZT ceramics were fabricated by the two-stage sintering technique. For the ceramics, electric, dielectric and microstructural properties were investigated, and also, Optical Shutter Devices Characteristics were measured with increasing the applied pulse voltage. As grain size was increased, relative permittivity,induced polarization and dp/dE were increased. The fabricated Optical Shutter Devices(thickness: 0.39 mm, IDT finger numbers; 17) showed the maximum optical output characteristic at 360 V.

Real-Time IR을 이용한 Polyesterimide의 경화거동 연구

홍진후,송주명,김현경,박미영,박기주 조선대학교 생산기술연구소 1999 生産技術硏究 Vol.21 No.2

Polyesterimide for enamel Wire coating was synthesized and its curing reaction was monitored by real-time FT-IR. Infrared 1019cm^(-1) band was used to monitor the curing process. Results of in-situ analysis showed that evaporation of ethylene glycol and transesterification started from 100℃. When curing temperature was higher than 200℃, ester reaction was favored over the ether reaction. It was concluded that curing temperature is the key factor to control the thermal stability of the enamel wire coating.

경부에 발생한 2새열낭종 2례

박홍주,박세찬,손영휘,윤천주,유선열 대한악안면성형재건외과학회 2000 Maxillofacial Plastic Reconstructive Surgery Vol.22 No.4

Developmental anomalies arising from the branchial apparatus include cysts, external sinuses, internal sinuses, and complete fistulas. Second branchial cleft cysts are by far the most common among these anomalies. It may occur at any age, being most common in the third decade, and more frequent in the male than in the female. It usually presents a smooth, round, nontender fluctuant mass located between the level of the tragus and the clavicle along the anteromedial border of the sternocleidomastoid muscle. It is lined by respiratory or squamous epithelium unless inflammation is present. The considerable amount of lymphoid tissue may be found beneath the epithelium. The treatment of choice of branchial cleft cyst is surgical excision. If the lesion is acutely infected, however, it is essential to relieve the infection prior to the surgery This report deals with two cases of second branchial cleft cyst. In case 1, the cyst had rapidly increased in size over pregnant period. In case 2, the patient presented the swelling in the left neck, and had the history of incision and drainage because of misdiagnosis as submandibular space abscess. The infection was treated by antibiotic therapy in the first place, and then complete surgical excision was made. There was no evidence of any recurrence or complications for these 3∼4 years.

타타늄의 열처리 조건에 따른 동전위 양극분극특성 및 표면 미세구조 변화

주동현,이용렬,정영화,양홍서,박상원,이도재,송호준,박영준 大韓齒科器材學會 2002 대한치과재료학회지 Vol.29 No.2

The corrosion resistance of metallic implants is essential for successful implant osseointegration. Moreover, the implant surface should have appropriate surface roughness for the attachment of the osteoblast and collagen fibrils. When titanium is exposed to air a thermodynamically very stable oxide film is formed at once. This oxide is very thin and yet it protects the metal from corrosion instantaneously. However, the oxide would not be ideal, and it would be supposed that the state of oxide film would be various by the different conditions when it is formed. The objective of this study was to evaluate the electrochemical properties and surface microstructural changes of titanium after passivation treatment or exposure to high heat (in vacuum or in air). ASTM grade 2 commercially pure titanium (Ti) disks of 10㎜ diameter were wet ground and polished with 240 and 600 grit SiC, and then ultrasonically cleaned with distilled water and ethanol. Cleansed as-received samples (As-R group) were passivated with 30% nitric acid solution at 50℃ for 15 minutes to make the Pas group. The Std-V samples were made by treating the Ti disks in vacuum quartz tube (10^-8 Torr) at 530℃ for 40 min for stress relieving, followed by annealing at 700℃ for 90 min, and then slow cooling to room temperature. The Std-A samples undergo identical procedure as the Std-V group except that it is done in air. For 530℃-V samples, Ti disks were heated at 530℃ for 40 minutes and slow cooled to room temperature. The 1000℃-V samples were produced by heating Std-V specimens again at 1000℃ for 2 hr, followed by cooling to room temperature. 530℃-A and 1000℃-A samples were also prepared. Potentiodynamic anodic polarization measurement, SEM, AFM and XRD analysis were performed to evaluate the effects of the various treatments. The difference in the mean values of E_corr between groups showed statistically significant difference (P<0.05), but that of I_corr did not show significance (P>0.05). When Ti surface was passivated there was a shift of corrosion potential (E_corr) in the noble direction and a lower corrosion current density (I_corr) value. Std-A samples showed most noble E_corr value among the tested groups. 530℃-V samples showed more noble E-corr than other tested groups except Std-A group. 1000℃-V samples showed more noble E-corr than those of Std-V sample. In the case of Std-, 530℃- and 1000℃-groups, -A sub-groups showed better corrosion resistant characteristics than -V sub-groups in regard to E-corr and I_corr values. In the SEM observations, the surfaces of the As-R samples showed only scratch line on smooth surface. In Pas samples, thick oxide layer covered the surface under high magnification observation. 530℃-A samples were covered by oxide granules, and Std-A samples had 25~50 nm-thick acicular oxides. The 1000℃-A samples were covered by coarse oxide crystals with a granule diameter of 0.1~0.6 μm having a gross appearance of milky white color, which was identified by XRD as a rutile. On the other hand, 1000℃-V samples showed an Widmansta¨tten structrue of which the orientation of the lattice is formed along crystallographic planes of the parent crystals. On the AFM observation, 530℃-A samples showed RMS roughness of 79.38 nm which is 5 times rougher than those of the As-R samples. Std-A sample had a roughness of 330.47 nm which is about 20-times rougher than that of the As-R sample. 1000℃-A samples were covered by coarse granular oxides and the roughness were about 0.56 μm. Vacuum sub-group samples showed a more smooth surface than air sub-group samples, and the oxide film was more dense. Due to variability of the surface treatment and heat treatment conditions, the process of the oxide formation seems to be affected thereby making the corrosion properties and surface micro-morphology different. However, more various electrochemical analysis together with surface analysis, and an investigation for the effects of those on the osteoblast cell adhesion and calcium phosphate apposition are needed for the improvement of the osseointegration rates of the titanium implants.

이주여성 가사노동자에 관한 이론적 재검토

박홍주 동덕여자대학교 한국여성연구소 2009 젠더연구 Vol.- No.14

This study examined the pre-studies of labor situation of migrant domestic workers from a feminist viewpoint. Migrant women's domestic service labor is a representative case showing that the patriarchal gender division of labor in which women take a full burden of care is restructured into division of labor among women on the basis of race, nationality and age in the era of transnational migrant labor. It is also a starting point for criticizing Korean policies on migrant labor that fails to reflect the realities of 'Asian migrant women' as a new phenomenon that removes or expands the boundary of family in the age of globalization. Furthermore, this is a practical work that analyzes the migrant women's human rights.

탄소섬유쉬트로 보강된 철근 콘크리트 보의 휨 거동에 관한 실험적 연구

박현정,이홍주,안상호 新羅大學校 2000 論文集 Vol.49 No.-

The purpose of present study is to compare the effect of loading with that of non loading in case of the repair and strengthening R.C. beams with carbon fiber sheet(CFS). The study was performed in parameters of the ratio of tension bars, the effect of loading and unloading in case of the strengthening that with CFS. The strengthening amount of CFS was 1 ply in any case. The results of test were analyzed and the control specimens were compare with loading and strengthened specimens, non loading and strengthened specimens.

외과적 보조의 급속상악확장술 : 치험 5예 REPORT OF 5 CASES

박충열,이용욱,송종운,김영운,박홍주,오희균,유선열,이기현,황현식 대한악안면성형재건외과학회 2002 Maxillofacial Plastic Reconstructive Surgery Vol.24 No.1

Five adults (3 cases of bilateral posterior crossbite, 2 cases of unilateral posterior crossbite) with intermaxillary discrepancy of over 5㎜ due to maxillary transverse deficiency were treated by surgically assisted rapid maxillary expansion (SARME). Bilateral maxillary horizontal osteotomies, osteotomies of pterygomaxillary junction and anterior lateral nasal wall, ans anterior palatal osteotomy were performed in 4 cases, and unilateral osteotomies in 1case, followed by palatal expansion with tooth-borne orthopedic applicance. No significant complication was observed. The mean palatal expansion was 7.2㎜ (5.8∼10.0㎜) in the maxillary first molar region. During the mean follow-up period of 4 years (5 months∼8 years 7 months), no recurrence of crossbite was observed in all cases. The SARME seemed to be a simple, stable, and reliable procedure for achieving a permanent increase of over 5㎜ in skeletal maxillary transverse width of adults.