일선공무원의 재량권 범위와 한계

정영환,박근수 朝鮮大學校 社會科學硏究所 2004 社會科學硏究 Vol.25 No.2

이종마찰압접재 계면의 기계·금속조직학적 거동 및 파면특성 : STS304와 SM15C재를 중심으로 For STS304 and SM15C

오환섭,박경식,박준건,오정국,백영남 慶熙大學校 材料科學技術硏究所 1998 材料科學技術硏究論集 Vol.11 No.-

In this study is behavior of crack propagation and fracture under static tensile load, shear load, rotary bending fatigue load in friction welded dissimilar materials. Crack was observed in fine ferrite zone of SM15C and heat affected zone of STS304. Plastic flow was occured by friction welding process, so direction of crack is inclined with welded surface. Fatigue fracture most occurred in SM15C heat affected zone around interface. Fibrous zone with the view of macroscope and dimple pattern with the view of microscope were observed at fracture surface. Result is more metal micrstructure dependence than stress dependence by mechanical and metallic mechanics.

안료-수지-용제간의 상호작용이 TiO_2 안료의 분산에 미치는 영향

이근대,홍성수,박진환,안병현 釜慶大學校 2000 釜慶大學校 論文集 Vol.5 No.-

The effect of pigment-resin-solvent interaction on dispersion of pigment has been studied. The solubility parameter of TiO_2 pigment, determined in terms of suspension behavior of pigment in various solvents, was 10.27 (cal/cc)^1/2(δ_d = 8.23, δ_p = 3.45, δ_h = 5.10). The solubility parameter of Acryloid B-44, determined using rheological parameters of resin solution in different solvent, was 9.4 (cal/cc)^1/2. The solvent showing weaker interaction with pigment increased the adsorption of resin on to the pigment, resulting in higher dispersibility and higher storage stability of dispersion.

釜山地域 호스피스 導入을 爲한 制度 硏究

柳滉建,朴景華 高神大學校 保健科學硏究所 1991 보건과학연구소보 Vol.1 No.-

The hospice program provides palliative and supportive care to meet the special needs arising out of physical, emotional, spritual, social and economic stress which are experienced during the final stage of illness. This study is approached as following: First, Literatural review to hospice Second, Analysis of the hospice cases Third, Statistical data analysis The results of this study would be summarized as followings: (1) It is expected that increasing aged population and changing type of disease in particular, increasing of chronic diseases and cancers in Korea affects to present Health care systems. (2) There are two types of Hospice in Korea. One of them is Home visiting care type and the other is Hospice unit in the hospital. However, their activities are very feeble. (3) Before the regular enforcement to Hospice, it is needed prescription for the medical insurance coverage and the assignment of nursing fee. (4) The rate of cancer cases which appear in Busan is more than 10% of that of the Korean cancer appearance. However, there is no facility and little interest. Therefore, more study and a positive interest for Hospice should be demanded in Busan.

이종마찰압접재의 변형 및 균열 성장 거동 : STS304 와 SM15C재를 중심으로 For STS304 and SM15C

오정국,오환섭,박준건 조선대학교 동력자원연구소 1997 動力資源硏究所誌 Vol.19 No.1

In this study, behavior of crack growth and fracture under static tensile load in friction welded dissimilar materials, and necking phenomenon occuring at tensile yeilding point is shown. Crack is observed in heat affected zone including fine ferrite region of SM15C and heat affected zone of STS304. Plastic flow was occured by friction welding process, so direction of crack is inclined with welded surface. Fracture behavior of similar material is subject to joint of void, but dissimilar material is liable to joint of micro crack. Fibrous zone with the view of macroscope and dimple pattern with the view of microscope is observed at fracture surface.

사회복지에 있어서 자원봉사활동의 실태와 활성화 방안

최용호,김종환,박근수,노병수 朝鮮大學校 社會科學硏究所 2004 社會科學硏究 Vol.25 No.1

중부지역 옥수수 파종기에 따른 생육단계 및 수량성 변화

서종호, 문중경, 정건호, 서민정, 구자환, 박장환, 배환희, 신성휴, 권영업 忠北大學校 農業科學硏究所 2014 農業科學硏究 Vol.30 No.2

Maize hybrids were planted on April 1, April 25, May 20 and June 15 in 2012, 2013 at the experimental paddy and upland fields in Suwon city , respectively to know changes of growth stage and yield according to different planting time. Maize planting on April 1 was not recommended because total growing days at planting on April 1 was not different with that at planting on April 25 due to many days from planting to emergence over 20 days at planting on April 1. Total growing days were not much different among three planting time after April 25 because days from silking to maturity was lengthened though days from planting to silking was shortened at later planting time. Stalk weight was decreased as planting time was delayed, particularly at planting times after May 20 at paddy field by excess water injury during early growth stage. But, grain yield was not low as in May and June. It is needed to introduce early maturity maize variety as Yanganok at late planting for higher grain yield and enough time for soil preparation for next winter crops

구급일지를 통한 병원 전 환잔 분류 및 처치의 적절성 평가 연구

민순식,김재광,이근,박철완,양혁준,류일,현성열,이훈규,정환모,김윤 대한응급의학회 2000 대한응급의학회지 Vol.11 No.4

Background: Recently, patients' demands for emergency medicine are increasing, and most of prehospital medical care, including basic life support, cardiopulmonary resuscitation and triage, are provided by paramedics or emergency medical technicians. Evaluation of the adequacy of prehospital management and triage has become important for improving the quality and the effectiveness of the emergency medical system. Methods: The 202 patients who were transferred by ambulance with paramedics, nurses, or emergency medical technicians to the Emergency Department in Gil Medical Center from July 1, 1999, to September 31, 1999, were enrolled. This study was conducted prospectively by using the emergency physician,s log and newly devised protocols recorded by paramedics or nurses. Results: 1) Male to female ratio was 1: 0.8, and the peak age of the patients were the 4th(18.8%) and 6th decade(15.3%). 2) Of the 202 patients, 84 patients were transferred for trauma and 118 for medical problems. The mean transfer time was 6±1.73 minutes. 3) The validities of prehospital triage and decisions using the trauma severity measure and the disease severity measure, were 33.3% in trauma patients and 57.6% in medical patients.4) The results for the adequacy rate in prehospital management analyzed by using the rate of necessity of treatment. performance of treatment, and adequate treatment were as follows: oxygen supply.38.1/41.6/93.8 ; wound dressing. 19.3/71.8/92.9 ; immobilization of the cervical spine, 15.8/56.3/92.9 ; application of a spinal board. 12.9/42.3/72.7 ; application of a splint, 9.9/50.0/60.0 ; manual maintenance of an airway. 9.9/55.0/63.6 ; and CPR, 4.5/66.7/0. 5) Kind of ALS(Advanced Life Support) were not conducted(peripheral IV, EKG. intubation, medical administration. defibrillation, pacing). The rates of necessity of treatment were as follows: peripheral IV, 40.6%; ECG monitoring, 23.3% ; endotracheal intubation, 8.9% ; medical administration, 8.9% ; defibrillation. 3.5%; and pacing. 1.5% Conclusion: The adequacy of prehospital triage and decisions using trauma and disease severity measures was relatively low. To improve the adequacy of BLS(Basic Life Support) and to increase the performance of ALS(Advanced Life Support), we must create challenges to develop new protocols and to supplement new equipment.

시비방법별 벼 재배에 따른 전과정평가 방법을 적용한 환경영향 평가

신중두,임동규,김건엽,박문희,고문환,엄기철 한국환경농학회 2003 한국환경농학회지 Vol.22 No.1

Consoli가 설명한 것처럼 전과정평가의 개념 및 일반적인 정의에 따르면, 전과정평가는농업생산에 관련된 환경영향을 평가하는데 부합하는 방법이라고 생각되며, 특별히 전과정 평가방법인 Eco-indicator 95는 농업 체재에 대한 환경영향을 분석하는데 적절한 기법인 것으로 입정되었다. Eco-indicator 95 method를 이용하여 지구온난화 및 수계 부영양화와 관련된 시비체계에 따른 벼 재배에 대해 비교할만한 분석체계를 이루었다. 그렇지만 본 연구에서 전화정평가 항목에 기록된 모든 관련 정보가 환경 영향에 고려되지 않았기 때문에 Eco-indicator 95 method를 농업생산 체계에 적용할 때 몇 가지 난제에 부닥친다. Eco-indicator 95 method에 토양 및 자원의 이용과 같은 몇 몇 중요한 환경적인 문제가 포함되지 않았으며, 이 방법의 다른 문제는 환경 평가를 위하여 현장 정밀연구가 수행되지 않았다는 것이다. 그렇지만 본 연구에서 얻어진 생태지표 지수를 이용하여 벼 재배에 따른 시비방법 간의 차이점을 나타내기에 충분하다고 여겨지며, 가장 높은 생태지표 지수를 나타낸 화학비료를 시용한 구에서 가장 큰 환경영향이 관측되었고, 이러한 차이점은 주로 화학비료 투입에 의한 토양중의 높은 인산 함량의 축적 때문인 것으로 여겨진다. 분석한 시비체재는 특별히 지구온난화 보다는 수계의 부영양화의 환경적인 문제에 기여되는 것으로 나타났으므로 질소 시용비율 및 시용기술 이외에 액비 시용에 따른 양분 용탈이 수계 환경에 명확히 영향을 미치는 것으로 나타났다. The suitability of the Life Cycle Assessment (LCA) methodology to analyze'the environmental impact of rice cultivation with different fertilizing systems is investigated. The first part of an LCA is an inventory of parameters used and emissions released due to the system under investigation. In the following step, the Life Cycle Impact Assessment, the inventory data were analyzed and aggregated in order to finally get one index representing the total environmental burden. For the Life Cycle Impact Assessment (LCIA) the Eco-indicator 95 method has been chosen because this is well documented and regularly applied impact assessment method. The resulting index is called Ec -Indicator value. The higher the Eco-indicator value the stronger is the total environmental impact of an analyzed few system. The rice field experiment conducted in middle parts of korea was chosen as an example for the life cycle impact analysis. In this experiment the treatments were consisted of none fertilizer plot (NF), standard fertilizer plot (SF) applied chemical fertilizers based on soil chemical analysis before rice transplan ing, and efflux fertilized plot (EF) applied with pig wastes fermented as the same rates of SF plot as basis on total nitrogen content. The obtained Eco-indicator values were clearly different among the treatments in the rice trial. The total Eco-Indicator values for SF and EF have been observed 58 and 38% relative to the NF, respectively. For all the treatments the environmental effects of eutrophication contributed most to the total Eco-indicator value. The results appeared that the LCA methodology is basically suitable to assess the environmental impact associated with different fertilizer applications for rice cultivation. A comparative analysis of the fertilizing system's contribution to global warming and eutrophication is possible.

이종접합재 접합 계면근방 균열의 응력 및 파괴특성

오정국,차용훈,오환섭,박준건,박경식 朝鮮大學校 機械技術硏究所 1998 機械技術硏究 Vol.1 No.1

현재까지 이종마찰압접재의 강도측정은 실험 (7)-(15)에 의해 구해져 왔다. 하지만 최근 이종마찰압접재의 효율성을 인정하여 여러 실용 부품에 응용하려는 연구가 한창 진행중이다. 이종마찰압접재에 대한 저자들(1)-(6)의 기초실험결과 일반적인 단종재와는 상이한 파괴거동(3)이 관찰되었고, 파괴역학적인 관점에서 정성적인 data 확보가 필요하게 되었다. 따라서 본 연구에서는 인장시험시 이종마찰압접재의 접합강도와 미소균열들에 의한 파괴거동을 파괴역학적 관점에서 해석적으로 고찰하여 보고자 경계요소법(BEM ; Boundary Element Method)을 이용하여 접합계면을 포함하는 접합부를 중심으로 계면상의 응력분포와 계면의 중앙에 결함이 균열로써 존재하는 경우의 응력분포와 인장시험시 열영향부에서 관찰된 균열의 모델링을 통한 균열선단에서의 응력해석을 행하였고, 그 결과 얻어진 중요한 내용을 요약하면 다음과 같다. 계면의 중앙에 균열이 존재하는 접합계면의 표면부에서 응력의 특이성이 발생하며 탄성계수의 비가 증가할수록 특이성이 증가함이 관찰되었다. 탄성계수의 비가 일정한 경우 균열의 크기가 변화하여도 계면의 표면부에서 발생하는 특이성은 거의 같은 값을 갖게 되며, 탄성계수의 비가 증가할수록 표면부의 응력 특이성의 크기는 증가한다. 이종마찰압접재의 인장시험시 관찰된 균열을 모델링 하여 해석한 결과 최대 응력 기준으로 살펴볼 때 인접한 균열선단에서의 응력분포는 균열을 합체시키는 방향으로 작용함을 알 수 있다. In this study stress distribution on the interface and stress near tip of the sub-interface crack in the dissimilar friction welded material is analyzed by using of BEM( Boundary Element Method). Stress singularity near surface of model to analyze is observed for various crack length and ratio of elastic modulus. Tensile and shear stress distribution near two neithbor sub-interface crack tips are analyzed. Existance of singularity near surface on the interface is particular situation so that we need to investigate for dissimilar friction welded materials by means of numerical analysis method.