철갑소이탄에 의한 전투시스템 내 적재포탄의 순간화재에 관한 전산해석

이승철(Lee, Seung-Cheol),전우철(Jeon, U-Cheol),이해평(Lee, Hae-Pyeong),이헌주(Lee, Heon-Ju) 한국화재소방학회 2013 한국화재소방학회 학술대회 논문집 Vol.2013 No.추계

본 연구에서는 철갑소이탄이 장갑을 관통한 후 전투시스템 내의 적재포탄(고폭탄 또는 추진제)에 피탄되었을 때 순간화재 발생확률에 대해 전산해석을 수행하였다. 장갑은 RHA 재질로 설정하였고, 장갑 두께를 5~30 mm까지 5 mm씩 증가시키며 전산해석을 실시하였다. 고폭탄은 COMPB, TNT, PBX가 사용되었으며 추진제는 ANB가 사용되었다. 본 해석은 Autodyn 프로그램을 사용하였으며, 순간화재 발생 여부를 해석하기 위해 Lee-Tarver ignition and growth model을 사용하였다. 해석 결과, 철갑소이탄이 고폭탄 TNT와 PBX에 피탄되었을 때, 순간화재 발생확률이 모두 100%를 나타내었으며, 고폭탄 COMPB의 경우, 0.8~0.08%로 나타났다. 추진제 ANB의 순간화재 발생확률은 3.8~3.6%로 나타났다.

난포기 및 황체기에 있어서 돼지 난관 협부 평활근의 neurotransmitter들의 수축효과에 대한 estradiol-17β및 progesterone의 영향

이민기,노규진,심철수,남윤정,김주현,최상용 慶尙大學校 1991 論文集 Vol.30 No.2

The effects of estradiol-17β or progesterone on the contractility of neurotransmitters on pig oviductal isthmic smooth muscle were investigated. The motility of the isolated smooth muscle was recorded by using physiological recording system. The results were summarized as follows : 1. The contractility induced by histamine or prostaglandin F2α was depressed by the pretreatment of estradiol-17β but was not by the preteatment of progesterone in follicular or luteal stage. 2. The contractility induced by acetylcholine was depressed un follicular stage but excited in luteal stage by the pretreatment of estradiol-17β or progesterone. 3. The contractility induced by norepinephrine was depressed by the pretreatment of progesterone in follicular stage but was excited by the pretreatment estradiol-17β in luteal stage.

콜레스테롤 생합성 저해제 검색법의 개발

임종철,이남훈,김한균,염형렬,이대호,강현석,류형선,명재일,김완,신부안 全南大醫大 2001 전남의대학술지 Vol.37 No.2

구리 지역에서 조사한 고혈압의 인지도, 치료률 및 관리률

홍철호,김순길,홍택원,이제,신진호,이재웅,김경수,김정현,임헌길,이방헌 대한간질학회 2003 대한간질학회지 Vol.9 No.1

폐분체 도료의 재활용 방안에 관한 연구

신동철,김영훈,이순기,김경원,신선명,강헌찬 동아대학교 환경문제연구소 1999 硏究報告 Vol.22 No.1

With the progress of industry, the much more demand of paint around us grows rapidly. However, the whole quantity of raw materials used to make powder coatings is presently imported to fill the domestic needs. Moreover, it is well known that the waste powder coatings from the domestic industries are mostly incinerated. The method of destructing the waste powder coatings by fire causes VOC to be generated, and this results in some serious environmental problems such as air pollution and so on. Therefore, the effective and proper measure must be devised to reuse the waste powder coatings for the purpose of eliminating waste of resources and avoiding the outflow of foreign currency. This study aims to make the plan to recycle the waste powder coatings, and its conclusion is drawn as follows: First, it can be seen that the waste powder coatings with a weak electrostatic power restore gradually to the original state of electrostatic power through the process of fusion and retreatment. Second, it can be estimated that those coatings, with the use of the cyclon, can be removed by dividing a powder of particles less than 10㎛. Third, it can be ascertained that the possibility of reusing the waste powder coatings is proved when it is divided into particles by cyclon and a revolving screen after the process of fusion, rolling, crushing and pulverization.

자동차 주물 제조용 선철 대체 Chip Briquette 개발 적용 사례

장철헌,이창섭 한국주조공학회 2005 한국주조공학회지 Vol.25 No.1

시효처리와 마모체가 치과용 콤포짓트 레진의 마모에 주는 영향

김승헌,임범순,문현정,이용근,김철위 大韓齒科器材學會 2001 대한치과재료학회지 Vol.28 No.4

Over the last decade, the use of posterior resin composites has grown considerably. Wear resistance of restorative materials is important for clinical longevity, esthetics, and resistance to dental plaque. The purpose of this study was to evaluate the effect of artificial saliva and 75% ethanol solution on the wear resistance of composite resins by measuring the amounts of wear, and compare the effect of antagonistic materials on the wear resistance of composite resins. Four universal composite resins (Z100, Aelitefil, Spectrum, and Unifill F) and two condensable composite resins (Surefil and Synergy Compact) were measured. Cylinder type specimens were light-cured for 40 sec on the wear surface, and 20 sec on each side surface. The surface for wear testing was polished by 600 grit SiC paper. Three different antagonistic materials (600 grit SiC paper, amalgam, and procelain) were used as an antagonist for 2-body wear test. After speciments were aged in 37℃, artificial saliva and 75% ethanol solution for specific periods (1 day, 1 month and 2 month), 2-body wear testing was performed by the FRP-2000 friction tester with applying 500 g load (80 kPa) to the specimen. The wear test was performed for 10 min and 30㎖ distilled water was used as lubricant. Amount of wear was measured by microscopic measuring device of Micro Hardness Tester in 0.1㎛ scale. There was significant difference in wear resistance of composite resins (p<0.05). Composite resins with filler content below 59 vol.% showed higher wear resistance that composite resins those with filler content above 62 vol.%. In composite resins from 1 day to 1 months (p<0.05). On the contray, the wear amounts of groups which filler fraction were above 62 vol.% did not show any significant differences with increasing aging period (p>0.05). In 1 day aged groups, the wear amounts of the groups aged in 75% ethanol solution were more than those of the groups aged for 1 month (p=0.045) and Spectrum group aged for 2 month (p=0.006). Amounts of wear were significantly decreased with changing antagonist from 600 grit SiC paper to amalgam or porcelain (p<0.05).

FESWMS-2DH를 이용한 하천의 흐름 해석

이철응,심재욱,박동헌 江原大學校 産業技術硏究所 2009 産業技術硏究 Vol.29 No.A

In this study, flood stage was computed by HEC-RAS, 1-D numerical analysis model and FESWMS-2DH, 2-D numerical model. Flood stages computed by two different models were compared for straight line, dot axle watercourse, dead-zone watercourse, section sudden-changing watercourse, and curved watercourse. From the results, flow velocity and water level were similar in straight watercourse and dot-reduction watercourse. However, there was difference of flow velocity and water level in dead-zone watercourse, sudden expansion, dot-reduction, and curve-watercourse. This result might be influenced by rapid change of watercourse due to dead-zone, the angle of inflow and outflow, and the curvature. Especially in this study, numerical model was applied to Wol-Song-Cheon at Chuncheon in order to analyze the effect of flood stage by two different models. By flowing properties around the bridge and confluence of rivers, it was found that flow velocity and water level was changed. Therefore, it was concluded that a lot of uncertainties are contained in the present bank.

담관결석증이 동반된 담도회충증 1예

주봉덕,유철재,이헌영 충남대학교 의과대학 지역사회의학연구소 1990 충남의대잡지 Vol.17 No.1

Biliary ascariasis results not only in biliary tract disease, but also in secondary stone formation, hemorrhage into biliaty tract, acute cholecystitis, biliary perforation, invasion to pancreatic duct, pancreatitis, he%atitis, and liver abscess. In recent, we experienced a case of biliary ascariasis with concomitant biliary stones, which was identified by ultrasonogram percutaneous transhepatic cholangiography, and computed tomography, thereby reporting it herein with a review of literatures.

자기베어링 런아웃의 적응제어

김재실,배철용,이재환,안대균,최헌오 창원대학교 산업기술연구소 2001 産技硏論文集 Vol.15 No.-

자기베어링의 회전정밀도에 영향을 미치는 인자로 PWM 전력증폭기, 위치 센서 등과 같은 자기베어링 구성 장치의 동특성 및 정밀도, 시스템의 정확한 모델링, 제어기법, 런아웃 등이 있다. 본 연구에서는 능동 자기베어링을 제어하기 위해 자기베어링의 PWM 전력증폭기와 회전축을 모델링하고 이를 바탕으로 능동 자기베어링 제어를 위한 PID 제어기를 구성하였으며, 변위 센서의 부착위치 및 회전축의 진원도의 영향으로 발생하는 주기적인 런아웃 요소를 첨가하여 런아웃의 영향을 확인하였으며, 런아웃(Runout)에 의해 발생하는 에러(Error)를 효과적으로 제어하여 자기베어링의 제어 정밀도를 향상시키기 위한 방법으로 기본적인 PID 제어기에 최소평균자승(Least Mean Square, LMS) 알고리즘을 적용한 적응 피드포워드 제어기를 구성하여 자기베어링의 능동 제어에서 발생하는 주기적인 런아웃을 효과적으로 제어할 수 있음을 MATLAB을 통한 시뮬레이션을 통해 확인하였다.