就業主婦와 非就業主婦의 結婚滿足度에 關한 比較硏究 : 光州直轄市를 中心으로 centered on the Kwangju city

李貞淑 호남대학교 1988 호남대학교 학술논문집 Vol.9 No.-

We can conclude this as follows; 1. it is fact that the marital satisfaction is affected by the several background factors, but it is also affected largely by the subjective factors such as humans ndividual character and one's view of life, etc. And so we need to make the life education from the child in order to take the affirmative and optimistic living view and to make the happiness life. 2. The Working woman who got job for her self satisfaction and self development has the high marriage satisfaction in general. Accordingly we can guess that woman could make the higher marriage satisfaction with her job. I think and want to be encouraged that the growth of the working woman give us the upgrading life in quality. 3. Marital satisfaction depends upon the relation with the family of her husband. Marital stabilization and marital satisfaction in Korean modern family has the close relation with her self adjustment with her husband's family and so we have to consider this as an important factor. I hope that this material and thesis can be used to the study about the marital satisfaction and the marital adjustment.

市中 各劇場의 空氣檢査

李貞珩,尹淳在 이화여자대학교 약학회 1961 梨花藥學會誌 Vol.- No.2

독일 大學과 學生써클

李貞馥 충남대학교 학생생활연구소 1973 學生生活硏究 Vol.2 No.-

MLS를 이용한 접근 유도에 관한 연구

李貞碩,張殷永,金元厚,方孝昌 한국항공대학교 1991 論文集 Vol.29 No.-

MLS(Microwave Landing System)는 어떤 활주로 상황에서도 기종에 관계없이 계기착륙이 필요한 항법정보를 정확하고 신롸성있는 상태에서 넓은 운용범위를 갖게되는 시스템으로서 ILS보다 장비기술 및 운용면에서 우수한 것으로 입증되었으며, 공항의 장애물과 악지형의 영향에 따라 유도특성이 방해받더라도 시스템의 가용성에는 제한이 없도록한 특징이 있다. 본 논문에서는 기존의 ISL의 접근절차로서는 불가능했던 비표준 지형과 평행 활주로에서 MSL를 이용한 접근 유도시 활주로 중심선에 대한 접근 오차 한계를 계산하고 기준 활주로와 평행 활주로 각각에 대한 접근유도시 거리오차를 산출하여 MSL를 이용한 정밀 접근유도 상태를 검토하였다. 그 결과 MSL는 비표준 지형 및 평행 활주로에서도 5NM이내의 거리에서는 접근오차가 0.1%(0.16NM)이내를 유지하여 ICAO 기준을 만족함으로써 규정상의 접근유도가 가능함을 알수 있었다. The MLS was followed by definition of a signal-in-space having the accuracy, reliability and coverage to aeronautics needs for all type of aircraft at all runway suitable for terminal instrument procedures. MLS has been demonstrated to be superior to ILS from both technical and operational capabilities. Even at runway where ground terrain and airport obstacles prevent standard split-site installations, the availability of MLS will not be limited. In this thesis, the range error and limitted error bound of a computed centerline approach is derived and identified in order to solve the problems of percision approach guidence at non-standard sitin gand parallel runway. As the result, it is known that the MLS is able to approach guidence with 0.1%(0.16NM) limited range error at non-standard siting and parallel runway within 5NM.

서울市 住宅問題 實態와 解決方案 : 低所得層을 中心으로

李貞林 이화여자대학교 사범대학 사회생활과 1977 綠友會報 Vol.- No.19

고온 및 화학약품 처리에 따른 국내산 화분용 유기질 배양토 원료의 C/N율 및 염기치환용량(CEC)의 변화

李貞植,柳炳悅,盧希宣 서울市立大學校 1995 論文集 Vol.29 No.-

화분용 배합토 원료로 국내산 유기질원료를 이용하기 위하여 볏짚, 왕겨, 톱밥, 땅콩껍질을 고온초리, 가성소다, 소석회, 알카리과산화수소처리를 하여 기존사용하던 피트모스, 부엽 및 관행배합토와 C/N율과 염기치환용량(CEC)를 비교분석한 결과 다음과 같다. 1. 질소함량이 높았던 재료는 땅콩껍질이었고 낮았던 재료는 톱밥, 왕겨였다. 탄소함량은 톱밥이 비교적 높았다. 전체적으로 톱밥은 매우 높아 다른것의 5∼6배 높았고 땅콩껍질이 가장 낮은 경향이었다. 볏짚은 무처리에 비해 모든 처리에 C/N율이 증가되었는데, 과산화수소와 소석회처리 및 온탕과 스팀처리에서 비교적 높았다. 왕겨도 과산화수소와 소석회처리에서 가장 높게 나타났다. 톱밥은 전처리중 가장 높았는데, 특히 소석회와 스팀 및 온탕처리에서 높았고 과산화수소에서 높은 편이었다. 그러나 땅콩껍질은 전체적으로 낮은 값을 보였으며, 가성소다 8%분무구와 소석회 및 온탕처리구에서 높은 경향이었다. 2. CEC의 변화에서 가장 높았던 재료가 볏짚과 왕겨였으며 다음이 땅콩껍질이었는데 전체적으로 톱밥이 가장 낮은 편이었다. 모든 재료의 물리, 화확적처리에서 피트모스나 부엽보다 크게 높았다. 왕겨는 온탕2시간처리와 소석회처리시 크게 증대되었다. 무처리에 비해 모든 처리에서 증가를 보였다. 볏짚은 온탕처리로 11배 이상 증가되었고, NaOH, 소석회 및 과산화수소처리에 의해 증가폭이 커졌다. 톱밥은 다른 재료에 비해 높지 않았으나 온탕처리와 과산화수소처리에서 높았다. 땅콩껍질도 원료의 CEC가 가장 높았으며, 소석회 및 온탕처리와 과산화수소처리에서 높았다. Four domestic raw materials were analyzed and evaluated in the four kinds of treatments which include as high temperature heat treatments, NaOH, Ca(OH)₂, alkaline H2O2 with comparison of conventional pot raw media for instance peat moss, leaf mold and mixed soil. The results are summarized as follows ; In C/N ratio change, rice straw had a tendency to increase in the treatment of H₂O₂ Ca(OH)₂ and heat treatments. H₂O₂ and Ca(OH)₂ treated for rice hull were getting higher for C/N ratio. In saw dust also it showed high its ratio by Ca(OH)₂, heat and H₂O₂ treatment against control. Whereas peanut hull showed a low ratio totally, but the plot of NaOH 8% spray, Ca(OH)₂ and hot water treatments trend to increase for it. In cation exchange capacity(CEC) change, rice hull was largely increased it by hot water 2 hours, Ca (OH)₂ in comparison with control. Also rice straw increased as much as 11 times against control particulary in case treatment for NaOH, Ca(OH)₂ and H₂O₂. Whereas saw dust were not high in all treatments to compare with other organic materials, whereas hot water and H₂O₂ showed more or less high. Peanut hull showed highest CEC in raw materials among four materials and there were high in Ca(OH)₂ and hot water and H₂O₂.

반응고 교반한 Al합금의 리오로지 특성

李貞一,魚淳澈,李榮根 충주대 산업과학기술연구소 1997 産業科學論文集 Vol.5 No.-

The effect of various thermomechanical treatments on the structure and rheological behaviour of Al-6.2wt%Si alloy and Al-4wt%Zn- 1wt%Mg alloy in its solidification range were investigated using a Searle type high temperature viscometer. During continuous cooling, the viscosities of these Al alloys increase gradually with increasing fraction of solidified alloy, until a critical fraction of solidified alloy is reached above which the viscosities sharply increase. The viscosities of these Al slurries, at a given volume fraction solid, decreased with Increasing shear rate. The size and morphology of primary solid particles during stirring are influenced strongly by shear rates, cooling rates, volume fraction and stirring time of solid.

江東6州와 尹瓘의 9城을 통해 본 고려의 대외정책

李貞信(Lee, Jung-Shin) 국방부 군사편찬연구소 2003 군사 Vol.- No.48

주조재의 3차원 열 및 유동해석(Ⅱ)

李貞一,黃圭東 충주대학교 산업과학기술연구소 2002 産業科學論文集 Vol.10 No.-

A 3-dimensional solidification analysis by the SOLA-VOF method was performed to find out the solidification sequences in the gravity-cast castings. The geometries and mesh diagrams of the casting and mold were automatically generated using a pre-processor based on the commercial Auto-CAD system. The solidification time of the casting and the temperature variation of the mold with cyclic casting process were reported in previous paper^1). At this paper, fluid flow behaviour of molten metal during gravity casting of the simulation for piano frame was analyzed by the numerical simulation in order to obtained the optimized cast condition.

光과 溫度 水準의 差異가 耐陰性 自生植物의 生長에 미치는 影響

李貞植,韓銀姬,柳炳悅 한국화훼연구회 1993 화훼연구 Vol.2 No.1

This study was carried out to obtain basic information on the proper native shade tolerant ornamental plants for the use indoor foliage plants. Four kind of native plants Calanthe discolor R. BR., Aceriphyllum rossi Eagler., Trachelospermum asiaticum var. intermedium Nakai., Saxifraga fortunei Hook var. incisolobate Nakai. and one introduced plants(Hedera helix L. 'Scutifolia') were grown in the differant temperatures arid light intensities to find out best growing indoor condition. Three temperature which were treated diurnal and nocturnal temperature 20/15℃, 25/20℃, 30/25℃ respectively and three light intensities were applied by shading 85%, 50%, and 0% of full sun were conducted and investigated for this sturdy. The results are summarized as fellows : 1.Calanthe discolor Lindl R. BR. Response of growth in the different temperatures and light intensities of Calanthe discolor R. BR., the best growth were resulted in the diurnal temperature 25℃ and nocturnal temperature 25℃ to compare with higher temperature treatments (30/25℃) and 50% shading plots of natural light showed more growth than that of growth in higher light. On the content of total chlorophyll had larger amounts in the 50% shading of natural light when to keep temperature 20/15℃, 25/20℃ than the high light (full sun) and high temperature (30/25℃). 2.Aceriphyllum rossi Eagler. were grown the best in the low temperature 20/15℃, and high light chlorophyll content also resulted condition the most in the low temperature(20/15℃) and high intensities, whereas were shown the least in the high temperature (30/25℃)and no shading. 3,In the Trachelospermum asiaticum var. intermedium Nakai. the growing condition was better growth chlorophyll content in higher temperature and higher light intensities. They gave resulted the most in 50% shading exceptionally whereas the others plots were next significant. 4.The best growth grave mere influence by the differences of light condition than tempera turn conditions in Saxifraga fortunei Hook var. incisolobate Nakai. Therefore, the 50% shading was the best growth in chlorophyll content when to keep the 30/25℃ and 50% shadings respectively. 5.In Hedrea helix L. 'Scutifolia' the growth was not particularly influenced by the different light intensities. The temperature 20/15℃ was the least growth among all light contidions. The figures showed higher content of chlorophyll in the temperautre 20/15℃, while 30/25℃ was the lower contents. These results might be thought Calanthe discolor Lindl R.BR., Saxifraga fortunei Hook var. incisolobate Nakai. can be easily use for indoor plants alike Hedera helix L. 'Scutifolia' in the evaluation of temperature and light condition. Whereas Tranchelospermum asiaticum var. intermedium Nakai. and Aceriphyllum rossi Eagler. might be thought difficult to grow the indoor because of adaptation in low light condition than temperature.