韓國産 抗腫瘍性 資源의 Screening에 대하여(II)

이상래,윤의수,신수철,이상철,Lee, Sang-Rae,Yoon, Eui-Soo,Shin, Soo-Cheol,Lee, Sang-Cheol 한국자원식물학회 1993 한국자원식물학회지 Vol.6 No.1

Many plants, which collected from Korea, were applied to antitumor and cytotoxic screeing tests against sarcom 180 a ascitec in mice, V-79 KB and P388 cultured cells. The results are summarixed as follows:1) The total packed cell volum method has been used for the antineoplastic screening for from natural higher plants in Korea. By this method, we have found out that the root, leaf and stem of Tripterygiu, regelii Spragne & Taketa having strong antineoplastic activity and also Rumex Japonicus Houtt. Eragrositis ferru-ginea Beauv. and Patrinia scabio-saefolia Fischer showed significant activity to anticancer tumor while cynanchum wilfordii Hemsley, and Rosa polyantha Sieb. et Zacc. showed slight activity to antitumor. 2) Among the 13 tested plants, the root and stem of Tripterygium regelii Spragne & Taketa and Amethystanthus excisus Nakai showed strong antitumor activity by the V79 cytotoxic cell screening test. 3) Twelve plants, which are glowing in mountainous area of Korea tested to anticancer activity. From the results, Eragrositis ferru-ginea Beauv., Angelica gigas Nakai, Geranium sibiricum L., Patrinia scabio-saefolia Fisher, Cynanchum wilfordii Hemsley, and Rubia akane Nakai have been proved to be anti-cancer plants by using P388 cell cultured method. 4) Tripterygiu, resgelii Spragne & Taketa, Eragrositis ferru-ginea Beauv., Patrinia scabio-saefoli Fisher, Cynanchum wilfordii Hemsley and Rasa polyantha Sieb. et Zacc., var. genuina Thunb. showed strong anti-tumor activity both total packed cell volume method and Cytotoxicity method.

PCM/FM 전송에서 가변 컷오프 특성을 갖는 선형위상 필터 블록의 펄스 성형에 관한 연구

이상래,나성웅,Lee Sang-Rae,Ra Sung-Woong 한국통신학회 2006 韓國通信學會論文誌 Vol.31 No.1c

본 연구의 목적은 PCM/FM 전송시스템에서 RF 대역제한을 위해 사용되는 가변 컷오프 및 선형위상 특성을 갖는 pre-modulation 필터의 설계 및 주파수 응답을 분석하는데 있다. 이러한 필터를 구현하기 위해서 디지털 FIR 필터, DAC 및 가변 2차 LPF의 필터 블록을 구성하였으며 각 스테이지별 진폭 주파수 응답 분석을 통해서 아날로그 7차 베셀 필터의 요구조건에 만족하도록 필터블록의 감쇄특성을 효과적으로 할당하여 설계하였다. 또한 필터블록의 선형위상 특성을 살펴보았으며 가변 2차 LPF에 대해서는 실제 구현할 소자를 적용하여 시뮬레이션을 수행하여 고정 대역폭의 2차 베셀 필터의 그룹지연과 비교하여 통과 주파수 대역에서 선형성 조건에 합당한지 분석하였다. The purpose of this study is to design and analyze the pre-modulation filter with the variable -3dB cutoff frequency and linear phase response for bandlimiting the allocation of radio frequency bandwidth in PCM/FM transmission system. For the implementation of this required filter, the digital FIR filter, DAC and variable 2nd order LPF have been constructed with the filter block which designed and analyzed by each stage in order to satisfy the attenuation characteristic requirement of the analog 7th order bessel filter. The paper also concerned the linear phase properties for the filter block. Especially we have carried out the linear phase simulation with real parts for variable 2nd order LPF and compared this simulation results with the one of the fixed bandwidth 2nd order bessel filter for validating the linear phase requirement.

교근에서 발생한 외상성 화골성 근염

이상래,조재오,강윤구,Lee, Sang-Rae,Cho, Jae-O,Kang, Yoon-Goo 대한구강악안면외과학회 2001 대한구강악안면외과학회지 Vol.27 No.4

We had experienced a case of traumatic myositis ossificans arising in right masseter muscle, inferior to zygomatic arch occurred on 25 year old male. He had some trauma on the site one year ago and visited with complaint of mouth opening limitation and swelling. Palpable mass with facial disfigurement was noted. and several ovoid radiopaque masses were revealed on C.T. examination. On histopathologic examination, multiple bone trabeculae with osteoblasts in its periphery was noted in connective tissues and invaded to neighbouring muscles, but any chondroid components were not revealed.

PCM/FM 전송을 위한 가변 컷오프 주파수 특성의 선형위상 필터 구현 및 검증

이상래,나성웅,Lee Sang-Rae,Ra Sung-Woong 한국통신학회 2006 韓國通信學會論文誌 Vol.31 No.7C

본 연구의 목적은 PCM/FM 전송시스템에서 RF 대역제한을 위해 사용되는 가변 컷오프 선형위상 특성을 갖는 pre-modulation 필터를 설계, 시뮬레이션을 수행하며 이를 바탕으로 하드웨어를 구현하고 검증하는데 있다. 이러한 가변 컷오프 주파수 특성의 필터는 디지털 FIR 필터, DAC 시스템 및 가변 2차 LPF의 필터 블록으로 구성되며 각 스테이지별 진폭 주파수 응답 분석을 통해서 얻어진 진폭 감쇄 요구조건에 따라서 각 스테이지별로 설계되고 시뮬레이션이 수행된다. 수행된 결과에 따라서 하드웨어로 구현하였으며 제작이 완료된 가변 컷오프 필터의 보간을 위한 아날로그 변환부인 DAC 시스템과 가변 2차 LPF에 대해서는 시뮬레이션 과정에서 예상한 결과치와 일치하는지에 대한 검증과정이 필수적이며 이를 위해서 톤 발생기를 이용한 검증 방안을 제시한다. 검증 결과로부터 보다 정확한 주파수 응답 특성을 위해서 교정 작업을 수행하였다. The purpose of this study is to design, implement and verify the pre-modulation filter with the variable -3dB cutoff frequency and linear phase response for bandlimiting the allocation of radio frequency bandwidth for PCM/FM transmission. For the design of this required filter, the digital FIR filter, DAC system and tuneable 2nd order LPF have been constructed and simulated according to the attenuation characteristic requirement of the amplitude frequency response by each stage. From these results, we have implemented the filter and verified the analog conversion hardware part which is composed of DAC system and tuneable 2nd order LPF for the interpolation of the discrete sequences. Especially this paper proposes and carries out the verification processes using the tone generator and the calibration procedures for more precise frequency response of the filter.

경두개방사선사진과 측방 개별화 단층방사선사진을 이용한 하악과두의 형태와 위치에 관한 연구

이상래,황의환,LEE Sang Rae,HWANG Eui Hwan 대한영상치의학회 1997 Imaging Science in Dentistry Vol.27 No.1

The purpose of this study was to observe mandibular condyle shape and position in an asymptomatic population. In order to carry out this study, 142 temporomandibular joints in 71 adults(35 males, 36 females), who were asymptomatic for temporomandibular joint disorders and had no history of prosthodontic or orthodontic treatments, were selected, and radiographed using the Accurd-200 head holder(Denar Co., U.S.A) for transcranial radiograms and the Sectography(Denar Co., U.S.A) for lateral individualized corrected tomograms. Mandibular condyles were classified morphologically and evaluated in positional relationships with articular fossae and articular eminences at centric occlusion and 1 inch mouth opening. The obtained results were as follows; 1. In the classification of mandibular condyle shape, the convex type was more prevalent in transcranial radiograms and tomograms taken at medial, central, and lateral locations. 2. In the mandibular condyle position at centric occlusion, the mandibular condyles were placed posterior to the center of articular fossae in transcranial radiograms and anterior to the center of articular fossae in tomograms taken at medial, central, and lateral locations. 3. In the mandibular condyle position in right and left TMJs at centric occlusion, the mandibular condyles were placed bilateral asymmetric relationships to the articular fossae in transcranial radiograms and tomograms taken at medial, central, and lateral locations. 4. In the mandibular condyle position at 1 inch mouth opening, the mandibular condyles were placed anterior to the articular eminences in transcranial radiograms and tomograms taken at central location and posterior to the articular eminences in tomograms taken at medial and lateral locations.

구내촬영상의 X선해부

이상래,강우곤,Lee, Sang-Rae,Gang, U-Gon 대한치과의사협회 1980 대한치과의사협회지 Vol.18 No.8

韓國과 日本産 抗腫瘍性 資源의 Screening에 대하여

이상래,윤의수,신수철,이종일,Lee, Sang-Rae,Yoon, Eui-Soo,Shin, Soo-Cheol,Lee, Jong-Il 한국자원식물학회 1993 한국자원식물학회지 Vol.6 No.2

21plants, which collected from Korea and Japan, were applied to antitumor and cytotoxic screening tests against sarcoma 180 a ascitec in mice. The results are summariged as follows : 1) The total packed cell volume method has been used for the antimeoplastic screening for from natural higher plants in Korea. By this method, we have found out that Selaginella involves, Patrinia hispida, Archyranthes japonica and Solanum nigrum having significant activity and also Cydonia sinensis and Rubia akane showed slight activity to antitumor 2) The total packed cell volune method has been used for the antineoplastic screening for from natural higher plants in Japan. Among the 21 tested plants, lsodon japonicus having strong antitumor activity and also Torilis japonica, Aralia elata, Leonurus sibiricus and Rubia cordifolia showed significant activity to anticancer tumor while Forsythia spp and Solanum nigrum showed slight activity to antitumor. 3) Among the 21 tested Korea plants, lsodon excisus and Forsythia Koreana showed strong antitumor activity by the V79 cytotoxic cell screening test.

위성 발사체의 전자파 환경

이상래(Sang-Rae Lee),이재득(Jae-Deuk Lee) 한국항공우주학회 2003 韓國航空宇宙學會誌 Vol.31 No.2

RS485 Star 구조의 비행체 탑재용 데이터 수집시스템 구현 및 성능시험

이상래(Sang-Rae Lee),이재득(Jae-Deuk Lee) 한국항공우주학회 2004 韓國航空宇宙學會誌 Vol.32 No.7

본 논문은 중, 대형 비행체에 분산 탑재되어 있는 많은 센서를 효과적으로 실시간 데이터를 수집할 수 있는 시스템의 구성도를 소개하고 각종 서브 장치의 회로, 장치들간의 통신 프로토콜에 대한 설계 내용 그리고 최종적으로 실험을 통해 성능 검증한 내용을 언급한다. 각 장치들은 FPGA 소자를 기본으로 하여 모든 제어 로직, 시퀀스 로직 등의 디지털 회로를 설계 및 시뮬레이션을 수행하였으며 그 결과를 바탕으로 실제 하드웨어를 제작하여 원거리 아날로그 및 디지털 데이터의 획득, 수집 및 포맷의 일련의 과정들이 정상적으로 이루어지는지를 확인하였다. This paper describes on-board decentralized data acquisition system that acquires and encodes the numerous sensor data distributed on the big flight vehicles efficiently. The system’s sub-units which have one encoder unit and several remote units were designed and simulated according to the communication protocols and the control, sequence logics based on the FPGA chip. And we have made the functional verification of the acquisition, collection and formatting of remote analog and digital data for the manufactured hard wares.

무인기용 레큐퍼레이터 소재의 용접부에 대한 고온 피로수명 예측

이상래(Sang-rae Lee),조찬용(Chan-yong Cho),김재훈(Jae-hoon Kim) 한국추진공학회 2018 한국추진공학회 학술대회논문집 Vol.2018 No.5

본 논문은 경량 및 고효율 레큐퍼레이터를 구성하는 전열판의 용접부에 대한 실험적 연구이다. 특히 해당 용접부에 대한 수명을 알아내기 위해 고온환경에서 피로특성을 실험을 통하여 알아내기로 하였다. 실험은 레큐퍼레이터의 소재로 주로 선정되는 두가지 재질에 대해(STS347, AL20-25+nb) 실시하였으며, 시편은 실제 제작에 사용되는 방법과 ASTM에서 권고하는 규격을 준용하여 제작하였다. 그리고 상온과 고온에서 해당 시료의 기계적 특성을 평가하고자, 기계적 물성치를 시험하는 MTS-810 과고온환경을 부여하기 위한 고온로를 이용하였다. 시험은 각 시편에 대해 상온 및 고온 환경에서 인장시험을 실시하였으며, 나타난 인장강도의 50%, 40%, 30%, 20% 그리고 10% 에 해당하는 하중을 응력비 0.1 로 설정하여 피로시험을 시행하였다. 마지막으로 실험을 통해 나타난 피로수명 특성을 레큐퍼레이터의 운전조건에서 발생하는 하중에 따르는 응력과 비교하여 무인기 시스템이 요구하는 운전시간에 대비하여 해당 용접부들의 수명을 평가하였다. This paper is an experimental study on the welding part of the heat transfer plate which constitutes the lightweight and high efficiency recuperator. Especially, in order to find out the service life of the welded part, the fatigue characteristics were determined through experiments. Experiments were carried out on two materials (STS347, AL20-25 + nb), which are mainly selected as the material of the recuperator, and the specimens were manufactured using the methods used for actual fabrication and the standards recommended by ASTM. To evaluate the mechanical properties of the specimens at room and high temperature, MTS-810 was used to test the mechanical properties and a high-temperature furnace was used to give a high temperature environment. The tensile test was carried out at room and high temperature for each specimen. The fatigue test was carried out by setting the load ratio corresponding to 50%, 40%, 30%, 20% and 10% of the tensile strength at the stress ratio of 0.1. Finally, the fatigue life characteristics obtained by the experiment were compared with the stresses due to the load generated in the operating conditions of the recuperator, and the lifetime of the welds was evaluated in preparation for the operation time required by the UAV.