http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
초차법(招差法)과 고대역법(古代曆法)에서의 그 응용(應用)
이은성,Lee, Eun-Sung 한국천문학회 1974 Journal of The Korean Astronomical Society Vol.7 No.1
The interpolation formula Chao-ch'a-shn devised for the Chinese calendar, Shou-shih-li, has been shown as the one of the 3rd order polynomial. Its 3 coefficients have been determined from the table of the Sun in Shou-shih-li. Its applications to the moon and planets are also briefly mentioned.
초음속 연소 실험을 위한 연소식 공기 가열기 출구 유동 조건 실험 연구
이은성,한형석,이재혁,최정열 한국추진공학회 2022 한국추진공학회지 Vol.26 No.1
In this study, a vitiated air heater was designed and manufactured to supply high-temperature and high-pressure air to the ground test apparatus of a direct-connected supersonic combustor, and an experiment was performed to verify the target design point. By installing wedges at the upper boundary, lower boundary and center of the nozzle exit of the vitiated air heater, it was confirmed that the Mach number satisfies the 2.0 level, and the pressure of the combustion chamber was also satisfactory compared to the design point. In the case of temperature, the measured temperature deviation was large due to the degree of exposure of the thermocouple and the slow response characteristics. After that, the isolator was connected to the rear of the vitiated air heater, and the Mach number was measured in the same method, and the Mach number at the center of the isolator eixt was slightly reduced to 1.8∼1.9. 본 연구에서는 직접 연결식 초음속 연소기의 지상 시험 장치에 고온, 고압 공기 공급을 위한 연소식 공기 가열기를 설계 및 제작하였으며, 목표 설계점 만족 여부를 검증하기 위한 실험을 수행하였다. 연소식 공기 가열기 노즐 출구의 상부 경계, 하부 경계 및 중앙에 쐐기를 설치하여 마하수가 2.0 수준을 만족하는 것을 확인하였으며, 연소실 내부 압력 또한 설계점과 비교하여 만족할만한 수준으로 나타났다. 온도의 경우 열전대의 노출되는 정도와 느린 응답 특성에 의해 측정된 온도의 편차가 크게 나타났다. 이후 연소식 공기 가열기 후방에 격리부를 연결하고 동일한 방법으로 마하수를 측정하였으며, 격리부 출구 중앙의 마하수는 1.8∼1.9 정도로 소폭 감소하였다.
이은성,김희재,박제현,김현중,Borja, Danilo,Lee, Eunseong,Silva, Rene A.,Kim, Heejae,Park, Jay Hyun,Kim, Hyunjung 한국자원리싸이클링학회 2015 資源 리싸이클링 Vol.24 No.6
광미의 처리를 위한 heap bioleaching은 유망 기술이나 이 과정을 오랜 기간 수행한 연구는 부족한 상황이다. 본 연구는 약 436일 동안의 column bioleaching실험을 통해, 광미에서 고농도 비소의 제거특성을 평가하였다. 높이 350 mm의 플라스틱 column에 750 g의 광미와 A. thiooxidans 및 A. ferrooxidans로 구성된 호산성 박테리아를 접종하여 실험을 진행하였다. 비소제거 효율을 확인하고, 그 관련 기작을 이해하고자 침출액의 산화 환원전위와 pH, 액중 철 이온(ferrous와 ferric)의 생성 및 비소 농도를 측정하였다. 실험 436일 후, 비소의 제거율을 약 70%까지 달성 할 수 있었다. 하지만, 부분적으로 침출율이 감소하는 경향을 확인할 수 있었고, 이는 비소의 독성으로 인한 박테리아 군집의 활성도 저하에 의한 것으로 판단되었다. 본 연구의 결과는 향후 광미의 heap bioleaching 연구를 위한 기초 자료로서 활용될 수 있을 것으로 기대된다. Heap bioleaching for detoxification of mine tailings is a promising technology; however, long-term studies that aim to understand the potential of this process are scarce. Therefore, this study assesses the feasibility of column bioleaching as an alternative technology for treatment of mine tailings with high concentrations of arsenic during a long-term experiment (436 days). To accomplish this objective, we designed a 350-mm plastic column that was packed with 750 g of mine tailings and inoculated with an acidophilic bacterial culture composed of A. thiooxidans and A. ferrooxidans. Redox potential, pH, ferric ion generation, and arsenic concentration of the off-solution were continuously monitored to determine the efficiency of the technology. After 436 days, we obtained up to 70% arsenic removal. However, several drops in removal rates were observed during the process; this was attributed to the harmful effect of arsenic on the bacteria consortium. We expect that this article will serve as a technical note for further studies on heap bioleaching of mine tailings.