http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
유영찬,박유신,정희선,정진일 한국식품위생안전성학회 1992 한국식품위생안전성학회지 Vol.7 No.1
근래 외국에서 참기름이 들어오고 있어 산지에 따른 성분조성을 밝히고자 sterolfb와 지방산류의 함량을 측정하였다. 일본, 중국, 대만 등에서 수입되고 있는 참깨에서 얻은 참기름과 우리 나라 산의 참기름의 성분조성을 비교할 때 유사하여, sterol 류중 campesterol은 1.00~1.29 mg/g이었으며, ${\beta}-sitosterol$의 camp.에 대한 비율은 2.39~2.99%이고, sesamin의 camp.에 대한 비율은 3032~5.46이었으며, 지방산은 palmitic acid 8.37~10.09%, stearic acid 4.61~5.50%, oleic acid 35.24~39.97%, linoleic acid 43.04~49.76%, linolenic acid 0.21~0.31% 그리고 arachidic acid 0.40~0.69% 이었다. 그러나 일부 일본제 상품에서 sesamin이 아주 적게 함유되어 있고 linoleic acid, linolenic acid가 많이 함유되어 있는 반면 oleic acid와 stearic acid가 적게 함유되어 있으므로 콩기름을 함유한 것으로 추정되는 상품이 나타나고 있으며, 이들이 동일 상품에서 나타나고 있는 것으로 보아 불법으로 제조된 상품으로 사료되었다. This study primarily attempted to establish the method for the determination of the adulteration in the sesame oil. First of all, extensive experiment was conducted to determine the composition of genuine sesame oil prepared from Korean, Japanese, Taiwanese and Chinese sesame seed. Sesamin and sterols in unsaponfiable matter were examined along with fatty acid in saponifiable fraction by Gc. There was no significant difference in the composition of sesamin and sterols in sesame oils prepared from Korean and foreign seeds. The ranges of sesamin and ${\beta}-sitosterol$ against campesterol were 3.32~5.46 and 2.39~2.99 respectively in all samples. Similiar composition of fatty acids was showed in all pure sesame oils, in which the contents were 8.37~lO.09% palmitic acid, 4.61~5.50% stearic acid, 35.24~39.97% oleic acid, 43.04~49.76% linoleic acid, O.21~O.31% linolenic acid and 0.40~O.69% arachidic acid. Among the commercial sesame oils sold in Markets, three sesame oils from Japan revealed low sesamin, high linoleic acid and linolenic acid, and low oleic acid and stearic acid, suggesting the adulteration with soybean oil.
실대형 모형실험에 의한 2층 토글형 변위증폭 감쇠시스템의 내진보강 성능검증
유영찬(You, Young-Chan),정인용(Jung, In-Yong) 대한건축학회 2018 대한건축학회 학술발표대회 논문집 Vol.38 No.2
The purpose of this study was to verify the performance of 2-story toggle damper system which is used for seismic retrofit. Real-size experiments were conducted to evaluate structural performances of the damping system. The 2-story toggle damper system, which is made of 7x6m steel frame, showed significant nonlinear behavior within 2% drift. The damper system was attached on 2-story, 2-bay concrete frame and tested in the same way. The test results show that the concrete frame has no severe damages and the damping system operated as well as the system-sole-test.
한/일간 RC 건축물의 1차 내진진단 지침의 비교ㆍ분석
유영찬 ( You Young-chan ),이현지 ( Lee Hyun-jee ),신지욱 ( Shin Jiuk ) 한국구조물진단유지관리공학회 2020 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.24 No.1
본 연구에서는 RC 건축물의 내진성능평가를 위한 한국과 일본의 지침내용을 1차진단(일본지침) 중심으로 분석하고, 지침내의 세부규정의 차이로 인한 성능평가 결과의 편차를 분석하였다. 한/일간 내진성능평가 지침에 있어서 세부규정상의 차이를 보이는 주된 항목은 RC기둥의 평균전단강도 및 수직 비정형성 계수로 조사되었으며, 특히 한국의 경우는 다양한 주체별로 제안되는 지침에서 RC기둥의 평균전단강도를 상이하게 제안되는 것으로 파악되었으며, 이로 인하여 동일한 건축물의 경우도 내진성능평가 결과가 5.6%~38.4%의 편차를 나타내는 것으로 나타났다. 따라서, 우리나라 내진성능평가 지침들의 경우도 통일된 수치로의 계수 설정이 시급히 필요할 것으로 판단된다.
한/일간 RC 건축물의 2차 내진진단 지침의 비교ㆍ분석
유영찬 ( You Young-chan ),이현지 ( Lee Hyun-jee ),신지욱 ( Shin Jiuk ) 한국구조물진단유지관리공학회 2020 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.24 No.1
본 연구에서는 RC 건축물의 내진성능평가를 위한 한국과 일본의 지침내용을 2차진단(일본 지침) 중심으로 분석하고, 지침내의 세부평가 방법의 차이로 인한 성능평가결과의 편차를 분석하였다. 한/일간 내진성능평가 지침에 있어서 세부규정상의 차이를 보이는 주된 항목은 RC부재의 극한강도 계산방법과 일본지침의 경우에 부재별 연성지표와 강성/질량 편심을 추가로 고려하는 것으로 조사되었다. 이에 따라 각 평가방법의 결과와 비선형동적해석에 의한 정밀평가 결과를 상호 비교하였으며, 그 중에서 일본지침에 우리나라의 설계기준에 의한 RC부재의 극한강도 계산방법을 적용한 경우가 정밀평가 결과와 가장 유사한 것으로 평가되었다.
유영찬 대한건축학회 2004 Architectural research Vol.6 No.1
In this research, the analysis of post-buckling behavior of prismatic columns has been performed, having flexural and shear stiffness, under a combined load of uniformly distributed axial load along the length and concentric axial load at free end by solving the nonlinear differential equation with the differential transformation technique. The buckling load at various slopes at free end of column is calculated and the results of the analysis using the differential transformation technique is verified with those of previous studies. It is also shown through the results that the columns including the shear deformation have smaller buckling loads than those for the columns excluding the shear deformation have. Through this research, it is verified that the differential transformation technique can be applied to solve the nonlinear differential equation problems, such as analysis of post-buckling behavior of columns. It is also expected that the differential transformation technique apply to various more complicated problems in future.
소규모 철골조건축물을 위한 약축방향 노출형 주각부의 내진성능 향상
유영찬 한국구조물진단유지관리공학회 2019 한국구조물진단유지관리공학회 논문집 Vol.23 No.5
The purpose of this study is to enhance the seismic performance of exposed column-base plate weak-axis connections for small-sized steel buildings. According to the site inspection for the small-sized building construction, the arbitrary connection details in steel buildings have been applied at the job site, which is considered to be insufficient to guarantee structural safety and stability considering the increased seismic risk in Korea. Therefore, a series of test programs had been done to develop enhanced connection details in order to ensue the adequate seismic stability and safety of small-sized steel buildings. From the test results, It was found that the exposed column-base plate weak-axis connections commonly used in Korea shows very poor seismic behavior due to the “Rocking” phenomena caused by the residual plastic deformation of anchor bolts between anchor plate and concrete. A series of hysteretic tests for finding that solution were conducted to reduce the “Rocking” phenomena of the column-base plate connections, and local buckling of webs in H-column. Finally the enhanced stable seismic behavior was obtained by reinforcing at least 8 anchor bolts with good bonding strength and stiffeners to the webs in H-column. 소규모 철골조건축물의 접합상세에 대한 현장조사에 따르면 지진하중에 의한 횡적 안전성 및 안정성 확보가 불충분할 것으로 예상되는 임의 접합상세가 현장에서 적용되는 것으로 조사되었다. 이에 따라 본 연구에서는 소규모 강구조건축물의 노출형 주각부 약축 연결부의 반복이력 실험을 통해 문제점을 분석하고, 이를 바탕으로 내진성능을 향상시킬 수 있는 접합상세의 개발을 위해 일련의 실험연구를 수행하였다. 본 실험결과에 의하면, 국내에서 흔히 사용되는 노출형 주각부 약축방향 접합부의 이력거동은 앵커볼트가 콘크리트로부터 점진적으로 인발됨에 따라 베이스플레이트와 앵커볼트사이에 이격거리가 누적되어 하중역전구간에서 "Rocking" 현상이 발생되어 내진성능이 매우 낮은 것으로 조사되었다. 이와 같은 문제점을 개선하기 위하하여 앵커볼트의 콘크리트에 대한 부착 유/무와 개수 및 배열형태 등을 변수로 한 성능개선 실험체에 대한 일련의 반복 이력 실험을 수행하였으며, 최종적으로 소규모철골조 건축물의 노출형 주각부에 고강도 전산볼트형 앵커볼트를 8개로 3열로 배치하는 상세의 적용을 통하여 하중지지능력과 에너지분산능력 측면에서 내진성능이 크게 개선된 것을 확인할 수 있었다.