http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
시공간블록부호화를 적용한 공간다중화 시스템 수신기 : 복잡도 감소 방안
황현철,신승훈,이철진,곽경섭,Hwang Hyeon Chyeol,Shin Seung Hoon,Lee Cheol Jin,Kwak Kyung Sup 한국통신학회 2004 韓國通信學會論文誌 Vol.29 No.11A
본 논문에서는 Alamouti의 시공간블록부호화를 적용한 다중화 시스템에서 선형 검출기 (zero forcing 또는 minimum mean square error)의 특성을 유도하고 이를 이용하여 수신기의 복잡도를 줄일 수 있는 방안을 제시한다. MMSE 검출기를 적응형으로 설계할 경우 계산해야 하는 가중치 벡터들의 수는 공간 다중화하여 전송한 심볼들의 수만큼 필요하지만 유도한 특성을 이용하면 STBC블록들의 수로 줄어든다. 적응형 알고리즘으로 RLS 알고리즘을 적용해 보았고 복잡도를 50%이상 줄일 수 있었다. 또한 V-Blast검출방법의 복잡도를 줄이기 위해 제안된 정렬QR분해 검출기를 본 시스템에 적용할 때 동일한 특성이 유니타리 행렬 Q와 상위삼각행렬 R에 나타나는 것을 확인하였고, 이 경우에도 성능의 저하 없이 복잡도를 50%까지 줄일 수 있었다. In this paper, we derive some properties of linear detectors (zero forcing or minimum mean square error) at spatial multiplexing systems with alamouti's space-time block code. Based on the derived properies, this paper proposes low-complexity receivers. Implementing MMSE detector adaptively, the number of weight vectors to be calculated and updated is greatly reduced with the derived properties compared to the conventional methods. In the case of recursive least square algorithm, with the proposed approach computational complexity is reduced to less than the half. We also identify that sorted QR decomposition detector, which reduces the complexity of V-Blast detector, has the same properties for unitary matrix Q and upper triangular matrix R. A complexity reduction of about 50%, for sorted QR decomposition detector, can be achieved by using those properties without the loss of performance.
제한된 귀환채널에서 시공간블록부호화를 적용한 다중화 시스템의 성능
황현철,신승훈,임종경,김석호,곽경섭,Hwang, Hyeon-Chyeol,Shin, Seung-Hoon,Lim, Jong-Kyoung,Kim, Seok-Ho,Kwak, Kyung-Sup 한국통신학회 2005 韓國通信學會論文誌 Vol.30 No.9a
본 논문에서는 시공간블록부호화된 공간다중화 시스템에서 제한된 귀환채널을 효과적으로 활용할 수 있는 전처리 기법을 제안하고 성능을 분석한다. 전처리기는 기존의 대각-가중-시공간블록부호화 다이버서티 시스템을 공간다중화 시스템으로 확장하여 경험적으로 설계된다. 제안된 시스템에 대해 심볼 오율의 상위한계를 귀환채널 오류를 고려하여 분석하였다. 또한 모의 실험을 통해 4.akbps의 귀환채널 전송율에서 정규화된 도플러 주파수가 0.01이상이 되면 기존의 안테나선택기법과 코드북선택기법에 비해 심볼오율 성능이 우수함을 확인하였다. In this paper, an efficient pre-processing in space tine block coded-spatial multiplexing systems is presented. The pre-processing scheme is designed empirically with extending the diagonally weighted orthogonal space time-block coded diversity system to spatial multiplexing system. Simulation results show the proposed scheme outperforms both the precoder using the predefued codebooks and typical antenna selection scheme over moderate doppler frequency in limited feedback channel.
황현철(Hyeon-Chyeol Hwang),조봉관(Bong-Kwang Cho),조홍식(Hong-Shik Cho),홍재성(Jai-Sung Hong),류상환(Sang-Hwan Ryu) 대한전기학회 2009 대한전기학회 학술대회 논문집 Vol.2009 No.7
Light rail transit is classified to rubber-tired LRT, lear induction motor LRT, steel wheel LRT, monorail and tramway. LRT except for tramway are usually operated without driver and tramway are driven depending on driver's sight like usual car. LRT, which is one type of urban guided transit, shall be operated according to domestic "Operational Regulation for Urban Guided Transit" but existing regulation does not contain the safety related codes for driverless operation. In this paper, we investigate "IEC 62267 : Railway Application-Safety Requirements for Automated Urban Guided Transit" and compensate for existing operational regulation by referring to international standard and operational rule of commercial line.
황현철(Hyeon-Chyeol Hwang),이호용(Ho-Yong Lee),조봉관(Bong-Kwang Cho),곽재호(Jae-Ho Kwak) 한국철도학회 2011 한국철도학회 학술발표대회논문집 Vol.2011 No.10
Electronic devices in railway vehicle perform various functions such as not only braking and propulsion but also monitoring of vehicle condition on-line diagnosis and passenger information service etc. These devices distributed in vehicle should be efficiently connected so as to properly perform the functions. IEC (International Electro-Technical Commission) standardized train communication network (TCN) as IEC 61375-1 -2. TCN can reduce the interconnecting work load by reducing the number of wire-line compared with existing hard-wire connection and it brings the efficient control by enabling various devices to share the information. But existing TCN can not satisfy the increasing service demands like passenger internet access and CCTV surveillance etc. In this paper we investigate ECN (Ethernet Consist Network) and ETN (Ethernet Train Backbone) which are proposed to satisfy these demands and in the process of standardization by IEC TC9 WG43.
황현철(Hyeon-Chyeol Hwang),김유호(You-Ho Kim),이수환(Soo-Hwan Lee),임무열(Mu-yeol Lim),박혜란(Hye-ran Park) 한국철도학회 2014 한국철도학회 학술발표대회논문집 Vol.2014 No.10
현재 국내에서 적용되고 있는 철도시설물에 대한 성능시험을 위한 관련 법규는 도시철도법, 철도안전법, 철도종합시험운행 시행지침 등을 고려할 수 있다. 따라서 개발되는 트램은 도시철도법에 따라 철도에 해당되므로 개발제품은 철도용품의 품질인증, 철도시설의 안전기준, 철도용품의 형식승인, 성능시험의 대상, 성능시험의 기준 및 방법, 도시철도시설 성능시험 등을 검토하여 트램의 통합연계 신호시스템의 성능평가를 수행하여야 한다. 특히 2014년에 개정된 철도안전법, 철도종합시험운행지침, 철도시설의 기술기준의 내용을 면밀히 분석하여 해당되는 시험평가의 범위와 대상을 분류하고 한국형 트램의 시험평가 관련 법규를 분석하여 최적의 시험평가를 수행하도록 연구하여 향후 국내에 트램을 도입할 때에 문제가 없도록 하여야 한다. The Urban Railroad Act, Korean railway safety law, and the Enforcement of Railway Comprehensive Testing Operations can be considered as performance test related laws for domestic railway facilities. And the developing Tram system comes under the railway field according to the Urban Railroad Act. Therefore, Qquality–Certification of Railway Products, Rules on Safety Standards of Railroad Installations, Type Approval of Railway Products, Targets for Performance Tests, Performance Test Criterion and Method and Urban Railroad Performance Tests should be examined and a performance assessment of Signal Integration and Interface Systems should be carried out. The scope and target of test evaluation will be determined by analyzing Korean Railway Safety Law, the Enforcement of Railway Comprehensive Testing Operations and the Rules on Technical Standards of Railroad Installations which were revised in 2014. To carry out optimum test evaluations, this study analyzed relevant regulations in order to avoid any problems when Tram systems are introduced in Korea in the future.
이질적인 MIMO 사용자들을 가진 셀룰러 OFDM 시스템의 성능 분석
오준,황현철,임종경,김덕경,곽경섭,Oh Joon,Hwang Hyeon chyeol,Lim Jong kyoung,Kim Duk kyung,Kwak Kyung sup 한국통신학회 2005 韓國通信學會論文誌 Vol.30 No.4A
본 논문에서는 기존의 한 개의 안테나를 가진 사용자에 $시\cdot공간$ 부호화된 두 개의 안테나를 가진 사용자가 추가되어 동일 채널을 공유할 경우 신호를 효과적으로 분리 및 검출할 수 있는 방법을 제안하고, 시스템 성능을 분석한다. 간섭 제거 방법을 적용하여 사용자를 구분하고 최대우도 방법을 통해 각 사용자 신호를 얻는 기법을 제안한다. 기존의 안테나 수가 같은 다중 사용자를 위한 신호 검출 방법인 최소평균제곱오차 방식이 안테나 수가 다른 MIMO 사용자의 경우 효과적으로 적용될 수 없는 단점을 설명하고 모의실험을 통해 확인한다. 또한 제안된 기법에 OFDM을 적용하여 시스템의 성능을 평가한다. 모의실험 결과 제안된 시스템의 단일 안테나 사용자는 기존의 단일 송수신 안테나를 가진 사용자의 성능과 유사하고 두 개의 안테나를 가진 MIMO 사용자의 경우 성능이 향상됨을 확인한다. In this paper, we evaluate system performance and propose signal separation and detection when a user with one antenna shares the co-channel together with a user with two space-time coded antennas. The proposed technique can identify co-channel users by an interference cancellation method and detect the signals by maximum likelihood method. Simulation results show that the shortcoming of the Minimum Mean-Squared Error technique which can be applied two users with the same number of antenna but can not applied for heterogeneous MIMO users with the different number of antennas. Also, we apply the proposed scheme to OFDM system and evaluate the system performance. By simulations, we identify that the performance of the proposed system is the same as that of the existing single antenna users and improves the performance of the two-antenna MIMO users.
전송률 할당 및 전력 제어를 갖는 시공간 블록 부호화한 공간 다중화 시스템의 성능 분석
나승건,황현철,김석호,최선호,곽경섭,Na, Seung-Gun,Hwang, Hyeon-Chyeol,Kim, Seok-Ho,Choi, Sun-Ho,Kwak, Kyung-Sup 한국통신학회 2005 韓國通信學會論文誌 Vol.30 No.7a
본 논문에서는 시공간 블록 부호화한 공간 다중화 시스템에서 수신안테나의 수를 송신 안테나 수의 반을 사용했을 경우, 감소하는 비트 오류 성능을 개선하기 위해, 채널 상태와 관련한 귀환 정보를 이용하여 각 송신 안테나마다 적응적으로 전송률을 할당하고 전력을 제어하는 시스템을 제안하곤 그 성능을 분석한다. 성능 분석 결과, 8개의 송신 안테나와 4개의 수신 안테나를 사용한 경우, 안테나 쌍마다 전송률과 전력을 할당하는 간단한 알고리즘을 이용하면, 동일한 전송률과 전력을 사용한 개루프 방식에 비하여, BER이 10$^{-3}$인 구간에서 약 4.5dB의 성능이 향상하는 것을 알 수 있다. In this paper, we propose the transmission scheme for the space-time block coded spatial multiplexing systems that have adaptive rate and power allocation per each transmit antenna through the use of feedback information related to channel state. Simulation results show that the adaptive power and rate transmission scheme gain more than 4.5 dB over conventional equal-power and rate transmission scheme.