http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
축방향 왕복 운동을 하는 집중 질량을 가진 외팔보의 비선형 동적 모델링 및 안정성 해석
홍정환,유홍희 한국소음진동공학회 2003 한국소음진동공학회 논문집 Vol.13 No.11
A nonlinear modeling method for an axially oscillating cantilever beam with a concentrated mass is presented in this paper. Hybrid deformation variables are employed for the modeling method with which frequency response characteristics of axially oscillating cantilever beams are investigated. The geometric nonlinear effects of stretching and curvature are considered to accurately predict the frequency response characteristics of the oscillating cantilever beam. The effects of the size and the location of the concentrated mass on the frequency characteristics are investigated. It is found that the dynamic instability is significantly influenced by the two parameters.
원형 Cavity를 이용한 펄스형 Nb:YAG 레이저의 출력특성 및 병렬메쉬 회로의 최적화
홍정환,송금영,양동민,김휘영,김희제 부산대학교 생산기술연구소 2001 生産技術硏究所論文集 Vol.60 No.-
본 연구에서는 기존의 타원형 cavity가 아닌 원형 cavity를 설계 및 제작하여 그 동작특성에 관하여 연구하였다. 그 결과 타원형 cavity 보다 다소 적은 레이저 출력 효율 2.1%를 얻었다. 원형 cavity는 타원형 cavity 보다 컴팩트하며 제작하기가 용이하고, 제작 단가가 저렴하다는 장점이 있다. 입력에너지, 입력전압 및 펄스 폭을 동일하게 했을 경우 주회로 병렬 메쉬회로수를 최적화하고자 한다. PFN 회로를 1단에서 8단까지 PSPICE로 모의시험한 전류파형과 실제 실험한 전류파형이 거의 일치하였다. 그 결과 500㎲이상의 펄스 폭에서 6단 메쉬가 최적의 병렬 메쉬라는 결론을 얻었다. In this study, we have deigned and manufactured not only a present elliptic cavity but also a circular cavity, and experimented the operational characteristics. As a result, we obtained the maximum efficiency of 2.1% that was not less than that of an elliptic cavity. A circular cavity is much more compact and is easier to be manufactured than an elliptic cavity. And it can be made at a low cost. When the input energy, input voltage, and pulse width were in the same condition, we tried to decide the optimization of the mesh number of a parallel-mesh circuit which was connected with main power supply. The PSPICE simulation waveform of PFP(Pulse Forming network) circuit ranging from 1-mesh to 8-mesh nearly corresponded with the real current waveform obtained through a practical experiment. From these experimental results, we obtained the result that 6-mesh was the optimal parallel-mesh circuit in case that the pulse width was more than 500㎲.
홍정환(Hong Jung-Howan),이동운(Lee Dong-Un) 대한건축학회 2011 대한건축학회 학술발표대회 논문집 - 계획계/구조계 Vol.31 No.2(계획계)
This study of rural typinal film houses, the plants factory research is intended to replace. Plant Factory economics were the DCF analysis. Film House benefits rapid construction. However, getting a lot of outside influence, reduction in income due to rising oil prices ect that occurred was a disadvantage. The case of Plant Factory, high initial costs but higher operating costs due to ongoing recovery operations, and guarantee high profits.
홍정환(Honh Jung-Howan),이동운(Lee Dong-Un) 대한건축학회 2011 대한건축학회 학술발표대회 논문집 - 계획계/구조계 Vol.31 No.2(계획계)
The Intergrative Enviroment Control is Plant growth environment and working conditions of workers, plants, factories around the local environment, the integration of the global environment, and environmental factors on plant growth environment as a highly technical means to control comprehensively. This study of the plant factory to maintain the optimal environment for photosynthesis, plants, plant parts is the study of a more efficient operation.