http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
반도체 & 디스플레이 업종에서 사용되는 독성가스 저감시설의 처리효율 측정방법에 관한 연구
장성수,한재국,조현일,이수경 한국가스학회 2017 한국가스학회지 Vol.21 No.6
The usage of toxic gas in Korea is increasing in the development of high-tech industries such as semiconductors, displays and solar panels. The recent survey of domestic toxic gas consumption indicates an increase in annual average of 12.4 percent, but it is still focused on usage, and it is negligent in safety and treating the post. In September 2012, an accident occurred in Gu-mi involving hydrofluoric acid leak demonstrates the absence of safety management. Due to the incident, the government, industry and academia have been interested in chemical substances(toxic gas), and the government-led safety management has been established and implemented, but there are still a lot of safety blind spots. The purpose of this study is to develop effective measurement methods for the destruction or removal efficiency of gaseous materials emitted from the Scrubber used in the semiconductor and display industries. Also, this study demonstrated how toxic gas facilities can be applied without error by verification test for the measurement method guideline of the destruction or removal efficiency of the green-house gas reduction facility in the semiconductor and display industries used by the National Institute of Environmental Research and the UNFCCC, and suggested the differentiated measurement methods for toxic gas reduction facilities, and the third party certification for safety facilities is needed to prevent toxic gas accidents. 국내에서 독성가스의 사용은 반도체, 디스플레이 및 태양광 등 첨단산업의 발전에 따라 증가하고 있는 추세이다. 최근 5년간 국내 독성가스 소비량 현황을 살펴보면 연평균 12% 정도 증가 추세에 있지만, 아직까지 사용에만 관심이 집중되고 있고, 사후 처리나 안전에는 다소 소홀한 것이 사실이다. 2012년 9월 발생한 구미 불산 누출사고는 이러한 안전관리 부재를 단적으로 보여주는 사례이다. 이 사고로 인하여 정부, 업계 및 학계에서는 화학물질(독성가스) 누출사고 등에 대한 관심을 갖게 되었고, 정부 주도로 화학물질안전관리대책 등이 수립되어추진되어 왔지만 아직까지 안전관리 사각지대가 많은 실정이다. 본 연구에서는 반도체, 디스플레이 업종에서사용되는 저감설비에서 배출되는 가스상 물질에 대한 처리효율에 대한 효과적인 측정방법을 개발하는 것이 목적이다. 국립환경과학원과 UNFCCC에서 제시하는 반도체 & 디스플레이 업종에서 사용되는 온실가스 저감시설의 처리효율 측정방법 가이드라인에 대해 실증시험을 통해 맹독성가스 시설에도 오차 범위 내에서 적용 가능한지를 살펴보고 맹독성가스 저감시설에 대한 차별화된 효율성 측정 방법을 제시하였고, 독성가스 사고에 대한 선제적 예방을 위해서 독성가스 저감시설 등 안전설비에 대한 제3자 인증제도 도입의 필요성을 제안하였다.
C - Scan을 이용한 시편 내부의 결함 측정 및 탐상 (Ⅱ)
玄淸男,韓材國 弘益大學校 産業技術硏究所 2004 産業技術 Vol.14 No.-
In this study, the flaws in the several test specimens are detected by using a C-Scan system. The following results are obtained through this research; 1. How to detect the flaws in the specimens 2. How to determine the depth of the flaws in the specimens 3. How to determine the size of the flaws in the specimens 4. How to determine if the specimen is in one piece or not and how to detect defects at the joining part 5. Analysis by using Linear Profile and 3D View In order to determine the depth and size of the flaws in the specimens precisely, it is very important to operate the C-Scan system properly
강성표(Sung-Pyo Kang),김정관(Jung-Kwan Kim),한재국(Jae-Kook Han),성준혁(Joon-Hyuck Sung) 대한설비공학회 2010 대한설비공학회 학술발표대회논문집 Vol.2010 No.11
Energy conservation is one of the most important issues in recent years. According to this trend, the requirement of high-efficient inverter also is increasing nowadays and government tries to localizing the high-efficient inverter. Therefore, our company is proceeding the development of high-efficient DC inverter to apply Hybrid Heat Pump by government project. Most of popular inverter using in industries is AC type inverter. DC type inverter is superior to AC inverter in view of self efficiency as 98% comparing to 80~85% of AC inverter and control precision rate as 0.1%. However, the price is more expensive than AC inverter, so it is recovering by the effort of cost reduction and technology development.