http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
한도석,염흥열 한국산업보안연구학회 2016 한국산업보안연구 Vol.6 No.1
산업보안은 국내 산업의 이익 및 국가 경쟁력과 직결되는 중요한 분야이다. 중요한 산업보안을 위한 관련 법령인 「산업기술보호법」과 「영업비밀보호법」 이 제정되었고, 국내의 대표적인 정보보호 인증 제도로 정보보호 관리체계 (ISMS), 정보보호 준비도 평가(SECU-STAR), ISO 27001 인증 등이 있다. 하지만 관련 법률과 제도가 있음에도 불구하고 산업기술 유출은 산업보안에 대한 직접 적인 제도가 활성화 되어 있지 않아 지속적인 유출의 발생과 증가가 된다고 예 상할 수 있다. 따라서 산업기술 유출을 예방 또는 방지 할 수 있는 산업보안에 특화된 직접적인 인증 제도의 필요성이 있다. 본 논문에서는 국내의 대표적인 정보보호 인증제도인‘정보보호 관리체계 (ISMS)’,‘정보보호 준비도 평가(SECU-STAR)’,‘ISO 27001’ 인증제도의 비교 분석을 통해 산업보안에 특화된 인증제도의 필요성을 제안하고자 한다. Industrial Security is an important sector which is directly connected to profits and national competitiveness of the domestic industry. Is the relevant laws and regulations for the important industrial security is established 「Industrial Technology Protection Act」 and 「Trade Secret Protection Act」, the domestic typical information protection certification system in ‘ISMS’, ‘SECU-STAR’, ‘ISO 27001’ and so on. However, despite the laws and institutions, the outflow of industrial technology, since the direct system of industrial is not enabled, it can be expected to be increased with the development of continuous outflow. Therefore, there is a need for direct certification specializing in industrial security can prevent or avoid the outflow of the industrial technologies. In this paper, which is a typical information protection certification system of domestic ‘ISMS’, ‘SECU-STAR’, ‘ISO 27001’. Proposal the need for a certification system that specializes in industrial security through a comparative analysis of the ‘ISMS’, ‘SECU-STAR’, ‘ISO 27001’ certification system.
국내 정보통신기반보호법과 일본 사이버 보안 기본법에 대한 비교를 통한 고찰
한도석,한덕호,염흥열,Han, Do-Seok,Han, Deok-Ho,Youm, Heung-Youl 한국정보보호학회 2015 情報保護學會誌 Vol.25 No.3
최근 발생한 3.20 사이버 테러나 6.25 사이버 공격은 우리나라의 주요정보통신시설을 목표로 하였으며, 공격방법은 점점 지능화되고 첨단화 되어가고 있다. 특히 한수원(한국수력원자력) 해킹 사건으로 기반시설에 대한 보안의 중요성은 점점 커지고 있다. 기반시설에 대한 해킹은 다른 전산망 해킹 및 바이러스 유포 등에 의한 피해보다 인명 피해와 경제적 손실이 크므로 더 큰 이슈가 되고 있다. 이러한 이유로 국내에서는 정보통신기반시설의 중요성을 알고 2001년부터 "정보통신기반 보호법"을 제정하여 중요성이 높은 시설을 주요정보통신기반시설로 지정하여 보호하고 있다. 또한 최근 일본에서는 국내의 "정보통신기반보호법"과 유사한 "사이버 보안 기본법"을 2014년 11월 6일에 채택하였다. 이에 따라 본 논문에서는 국내의 "정보통신기반 보호법"과 일본의 "사이버 보안 기본법"에 대하여 비교를 통해 고찰하고자 한다.
AA 2014 알루미늄 합금의 고상율에 따른 미세조직 및 반응고 변형 거동
한도석,Han, Do-Suck 한국주조공학회 2017 한국주조공학회지 Vol.37 No.5
In the present study, the microstructural evolution and deformation behavior of AA 2014 aluminum alloys with different microstructures in a semi-solid state were investigated. For a given alloy, applied load and deformation time, the measured strain was higher at a higher temperature, indicative of a lower solid fraction. When a large proportion of the liquid was present as intragranular droplets, the alloy would not as easily deform because the effective liquid fraction between the solid grains had decreased. Greater deformation was achieved with higher grain boundary misorientations due to the enhanced wetting of the grain boundaries with liquid. A semi-empirical constitutive model is proposed for semi-solid deformation under the conditions in the present study. The mechanism of semi-solid deformation incorporates the initial flow of the liquid in the early stages of deformation, followed by a more gradual increase in the strain due to deformation by grain sliding accompanied by self-diffusion in the solid grains.
한국 전통 유기 제작에서 결함을 방지하기 위한 기계 학습 기반의 공정 조건 선택 방안
이승철,한도석,이혁,김낙수 한국주조공학회 2022 한국주조공학회지 Vol.42 No.4
In the present study, in order to prevent the misrun defects that occur during traditional brass casting, a method for selecting the proper casting process conditions is proposed. A learning model was developed and demonstrated to be able to learn the presence or absence of defects according to the casting process conditions and to predict the occurrence of defects depending on the certain pro- cess given. Appropriate process conditions were determined by applying the proposed method, and the determined conditions were verified through a comparison of different simulation results with additional conditions. With this method, it is possible to determine the casting process conditions that will prevent defects in the desired sand model. This technology is expected to contribute to real- ization of smart traditional brass farming workshops 본 연구에서는 전통 유기 주조 시 발생하는 미충전 결함을 방지하기 위하여, 주조 공정 조건 선택 방안을 제시하고자 한다. 공정 조건에 따라 발생하는 결함 유무를 학습하여 어떠한 공정 조건이 주어질 때, 결함 발생 여부를 예측하는 인공지능 모델을 개 발하고 검증하였다. 이를 응용하여 적합한 공정 조건을 결정하였고, 추가적인 시뮬레이션의 결과를 상호 비교하여 결정된 조건을 검증하였다. 이를 통해 원하는 사형 모델에서 결함을 방지할 수 있는 주조 공정 조건을 결정할 수 있다. 이와 같은 기계학습 및 전통기술 표준화를 통해 향후 전통 유기의 스마트 공방화에 기여할 수 있을 것으로 판단된다.