http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이차원 수치해석에 의한 강지보 성능을 고려한 숏크리트 라이닝의 부재력 평가 방법
하태욱,김대영,신영완,양형식,Ha, Tae-Wook,Kim, Dae-Young,Shin, Young-Wan,Yang, Hyung-Sik 한국터널지하공간학회 2008 한국터널지하공간학회논문집 Vol.10 No.3
일반적으로 터널설계와 관련된 수치해석에서 강지보의 효과가 고려되지 않고 있다. 최근 연약한 지반에 위치하는 얕은 터널 건설의 증가에 따라 터널의 안정성 해석에 강지보가 굴착으로 재 분포된 하중의 일부를 부담한다는 개념 하에 숏크리트와 함께 강지보의 효과를 적용한 사례가 늘고 있다. 이와 같은 해석에서 강지보는 여러 방법으로 고려될 수 있다. 본 논문에서는 숏크리트와 강지보의 발생응력을 알아보기 위하여 FLAC 2D를 이용하여 (1) 강지보를 고려하지 않는 일반적인 방법, (2) 숏크리트의 모멘트를 고려하지 않는 등가합성단면법, (3) 숏크리트와 강지보의 압축력과 휨모멘트를 모두 고려하는 등가합성단면법, 그리고 (4) 각각의 빔 요소로서 모델링하는 방법을 포함하는 4가지 방법에 대해 수치해석을 실시하였다. 그 결과, 강지보의 지보효과를 고려한 경우가 그렇지 않은 방법에 비해 현실적이며 경제적인 설계에 접근할 수 있는 것으로 나타났다. 강지보를 고려하는 3가지 해석방법은 지반 조건에 따라 조금씩 다른 경향을 나타내므로 설계조건 및 상황에 맞는 적절한 사용이 필요하다. In general, the effects of steel ribs are not considered in the numerical analysis of tunnel design. However, attempts have been increased recently to consider these effects in the analysis of shallow tunnels in soft ground, based on the fact that the steel ribs embedded in the shotcrete take a role to support some portion of the redistributed load due to excavation. In such analyses, the steel ribs can be considered in four different methods: (1) a conventional method where the steel ribs are not considered, (2) a method using the equivalent composite cross section in which the bending moment of shotcrete is not considered, (3) a method using the equivalent composite cross section in which both the compressive stress and the bending moment for the shotcrete and steel rib are considered, and (4) a method using beam elements for the shotcrete and the steel rib, respectively. These methods are adopted in the numerical analysis using FLAC 2D to investigate stresses of both the shotcrete and the steel rib. The overall results show that the analyses are more practical and economical when the effects of steel rib are considered fer the methods (2), (3), and (4). Since the results of those analyses considering steel rib capacity may be different according to the ground condition, it will be necessary to consider the appropriate method among them in accordance with design conditions.
동형 서브그래프 질의 처리를 위한 효율적인 그래프 경로 기반 인덱싱 기법
하태욱(Tae Wook Ha),김명호(Myoung Ho Kim) 한국정보과학회 2018 정보과학회 컴퓨팅의 실제 논문지 Vol.24 No.5
동형 서브그래프 질의 처리(Subgraph isomorphism query processing)란 대용량의 여러 작은 그래프들 혹은 하나의 큰 그래프로 이루어진 그래프 데이터베이스에 대해 사용자로부터 주어진 질의 그래프와 구조적으로 동일한(isomorphic) 여러 서브그래프들을 찾아주는 과정이다. 기존 연구에서는 그래프 경로(path) 기반 인덱스와 각 경로에 대한 테이블 간 조인(join) 연산을 통해 질의를 처리하는 방법을 제안하였다. 하지만 동일한 구조이거나 공통 에지(edge)를 가지는 경로들의 경우 데이터 그래프에 대한 중복정보를 가져 인덱스의 크기가 불필요하게 커지는 문제점이 있다. 본 논문에서는 패스 코드(path-code)와 유니크 코드를(unique-code)를 이용하여 데이터 그래프에 대한 중복 정보를 제거하는 효율적인 경로 기반 인덱싱 방법을 제안한다. 실험에서는 기존 경로 기반의 인덱싱 방법과 비교하여 제안한 인덱싱 방법의 효율성을 보인다. 또한, 실제 그래프 데이터베이스에 대해 제안한 방법이 빠른 질의 처리를 가짐을 보인다. Given a graph database which consists of small graphs or a single large graph, the subgraph isomorphism query processing finds all subgraphs isomorphic to a query graph from a user. The previous research proposed a query processing method using join operations between tables, which include path information of a database graph, from a path-based index. However, there is a problem if the index contains a lot of duplicate information because of paths that are the same or have common edges. In this paper, we propose an efficient path-based indexing technique without duplicate information using a path-code and a unique-code of a path. In the experiments, we show the effectiveness of our proposed method by comparing it with the previous indexing method. We also show that our method does a fast query processing on real graph databases.
페라이트 도금법에 의한 NixFe₃-xO₄ 박막의 제조와 자기적 성질
하태욱(Tae Wook Ha),이정식(Jeong Sik Lee),김일원(Ill Won Kim) 한국자기학회 1998 韓國磁氣學會誌 Vol.8 No.5
The magnetic thin films can be prepared without vacuum process and under the low temperature (<100 ℃) by ferrite plating. We have performed ferrite plating of Ni_xFe_(3-x)O₄ (x=0.162~0.138) films on cover glass at the substrate temperature 80 ℃ and pH range of the oxidizing solution, 7.1~8.8. The crystal structure of the samples has been identified as a single phase of polycrystal spinel structure by x-ray diffraction technique. The deposition rate and the grain size of the film increased with the pH of oxidizing solution. The coercive force (Hc) decreased with the pH of oxidizing solution.
Ferrite plating 방법에 의한 Fe₃-xMnxO₄ 박막 제작과 자기적 성질
하태욱(Tae Wook Ha),이정식(Jeoung Sik Lee) 한국자기학회 1996 韓國磁氣學會誌 Vol.6 No.3
The magnetic thin films can be prepared without vacuum process and under the low temperature(<100 ℃) by ferrite plating. We have performed ferrite plating of Fe_(3-x)Mn_xO₄(x=0.0~0.023) films on glass plate at 80 ℃. We got the film 9000Å in thickness, having a mirror-like luster. The composition parameter, x, in the Fe_(3-x)Mn_xO₄ films is much smaller then the corresponding on, x′, in the reaction solution(x/x′=0.04). The saturation magnetization(Ms) of Fe₃O₄ ferrite film as measured by a VSM was Ms=480 emu/cc which agrees with Fe₃O₄ bulk samples.
하태욱 ( Tae-wook Ha ),김지은 ( Jee-eun Kim ),김영훈 ( Young-hun Kim ) 한국환경기술학회 2014 한국환경기술학회지 Vol.15 No.6
활성탄은 많은 수환경에서 흡착제로 사용되고 있다. 분말활성탄의 회수 및 재사용을 보다 용이하게 하기 위한 기초연구로서 상업적으로 이용 가능한 활성탄을 이용하여 자화활성탄을 제조하였다. 선행연구를 참조하고 2가철의 농도 및 합성조건을 변경하여 최적조건을 찾았으며 황산철의 농도 0.1 M, 수산화나트륨의 농도 10 M에서 99.99 %의 자화율을 얻을 수 있었다. 자화 활성탄의 수중에서 안정성테스트를 위하여 물과 96시간 이상 접촉하게 하고 5회 이상 재사용하는 실험에서 자화활성탄의 자화성능의 저하가 발견되지 않았다. 자화활성탄을 염료폐수를 대상으로 반복 사용하였으며 4회 사용시 활성탄의 효율은 20 % 정도 감소하고, 자화활성탄의 효율 또한 25 % 정도 감소하지만, 과산화수소를 이용하여 재생 처리할 경우 염료의 흡착에 반복적으로 사용할 수 있음을 증명하였다. 재생처리에 초음파를 가할 경우 그 효율이 증가됨을 확인하여 신속한 재생처리를 위해 과산화수소와 초음파를 동시에 사용하는 것이 유리함을 증명하였다. Activated carbon (AC) has been used as an adsorbent in various aqueous conditions for environmental treatment purposes. As a basic study for recovery and reuse of AC, magnetized powdered activated carbon (MPAC) was developed for use in treatment of dye wastewater. The optimal iron content in MPAC was determined by varying the concentration of ferrous iron in the material preparation. synthetic condition was obtained in the repeated experiment with varied ferrous iron concentration. The stability test of MPAC in which MPAC was reused after 96-hr immersion in water indicated there was no reduction of magnetic property. The regeneration study showed that MPAC could be regenerated with hydrogen peroxide after use and the regeneration efficiency was increased with sonication.
하태욱(Tae Wook Ha),전기호(Gi Ho Jun),응우엔 민 찌(Minh Tri Nguyen),한성민(Sung Min Han),신정우(Jung Woo Shin),안경관(Kyoung Kwan Ahn) 유공압건설기계학회 2017 드라이브·컨트롤 Vol.14 No.4
This paper introduces a control algorithm for trajectory control of an electro-hydrostatic rotary actuator. A key feature of this paper is that an adaptive PID based on sliding mode is used to control the nonlinearity and uncertainty factor of single input/output system. Accurate knowledge of rotary actuator angle can result in high-performance and efficiency of electro hydraulic system. First, the position control is formulated using the adaptive PID with sliding mode technique and uncertainties in the hydraulic system. Second, the controller can update the PID gains on-line based on error caused by external disturbance and uncertain factors in the system. Finally, three experimental cases were studied to evaluate the proposed control method.
수치해석을 통한 철도구조물용 강성보강옹벽의 적용성 연구
하태욱(Ha Tae-Wook),김대상(Kim Dae-Sang),김기환(Ki-Hwan Kim) 한국철도학회 2009 한국철도학회 학술발표대회논문집 Vol.2009 No.11월
This research reviewed the deformation characteristics of the geosynthetic reinforced soil retaining wall(GRS-RW) with short reinforcement and rigid facing and compared with segmental retaining wall for the railroad by 3D numerical analysis. The deformation of the wall, the earth pressure of the backfill and the tensile force of reinforcement were evaluated during the construction stage with the stage construction procedure and the final loading stage. The height of backfill per one step was fixed as 40㎝ for the segmental retaining wall and was varied 30, 40, 50, and 60㎝ for the rigid facing wall. In spite of concluding short reinforcement the rigid facing wall had lower lateral deformation of the wall than the segmental retaining wall while the earth pressure was similar.