ER 유체와 압전작동기를 이용한 엔진마운트의 모델링 및 제어

최승훈,최영태,최승복,Choi, Seung-Hoon,Choi, Young-Tai,Choi, Seung-Bok 대한기계학회 1996 大韓機械學會論文集A Vol.20 No.2

This paper presents a new prototype of an engine mount for a passenger vehicle featuring ER(elector-rheological) fluids and piezoactuators. Conventional rubber mounts and various types of passive or semi-active hydraulic engine mounts have their own functional aims on the limited frequency band in the board engine operating frequency range. However, the proposed engine mount covers all frequency range of the engine operation. A mathematical model of the proposed engine mount is derived using the bond graph method which is inherently domain, the ER fluid is activated upon imposing electric field for vibration isolation while the piezoactuator. Computer control electric fluid for the ER fluid H.inf. cotrol technique is adopted for the piezoactuator. Computer simulation is undertaken in order to demonstrate isolation efficiency of the engine mount over wide operating frequency range.

신생혈관 억제제 KJ3, Betulinic acid, Fumagillin의 혈관형성억제 및 신경모세포종에 대한 치료효과

최승훈,이정희,황의호,Choi, Seung-Hoon,Lee, Jung-Hee,Hwang, Eui-Ho 대한소아외과학회 2002 소아외과 Vol.8 No.2

The antiangiogenic effects of novel agent KJ3, Betulinic acid, and Fumagillin on the neovascularization were studied by examining ultrastructural alterations in the vasculature of synthetic gelform and mouse neuroblastoma C1300. Small pieces of gelform with 0.4% agar were introduced subcutaneously (s.c.) in 7 week old male CH3/HeJ mice. After the $LD_{50}s$ were determined by FACS analysis, a third of $LD_{50}$ of three drugs were injected either locally or intraperitoneally every other day for 14 days. A/J mice were inoculated s.c. with the C1300 neuroblastoma cell line, then either saline or three drugs were injected in the same manner. The antiangiogenic effects of three drugs were studied by measuring the histologic changes in tumors, and immunostaining for CD34, VIII/vWF, CD105, and thymidine phosphorylase. In the drug treated groups, the number of vessels in gelform experiments and C1300 neuroblastoma experiments were lower than the corresponding values in the control. The histologic findings were significantly different in drug treated groups on day 7, but these were not significant on day 14. These results imply that antiangiogenic agents were effective when the tumor burden is minimal.

Hirschsprung's Diease: 수술 후 치료와 문제점

최승훈,Choi, Seung-Hoon 대한소아외과학회 2002 소아외과 Vol.8 No.1

Since Swenson and Bill established the treatment principles of Hirshsprung's disease in 1948, there have been significant advances in the management of this disease. During the last decade, one-stage correction of Hirshsprung's disease without colostomy and primary laparoscopic pull-through procedure became popular with recent advances in the technology and refinement of the equipments. But the outcomes for Hirshsprung's disease are not always successful, and long-term follow-up isessential. Most children after corrective surgery show significant improvement in respect to fecal continence and constipation, that may not be apparent until late adolescence. The purpose of this study was to review the postoperative problems of Hirschsprung's disease and it's management.

백금 스크랩으로부터 아민산백금용액 제조 및 Soot Oxidation 특성

최승훈,Choi, Seung Hoon 한국자원리싸이클링학회 2018 資源 리싸이클링 Vol.27 No.3

본 연구에서는 디스플레이 산업의 백금 폐스크랩을 용해, 용매추출을 통하여 백금족 성분을 효율적으로 추출하고, 추출된 백금용액을 디젤자동차 배가스 정화촉매용 전구체 용액으로서 제조하고, 그 촉매활성을 실험하였다. 용액화학적 이론 연구를 통하여 백금 화학종의 수용액상 거동을 조사하였고, 화학종들의 존재영역 및 거동을 근거로 추출 및 분리 가능방안을 수립하였다. 전기화학적 방법에 의해 폐스크랩을 용해시킴으로써, 용해시간 단축 및 추출효율을 높였으며, 로듐 성분을 분리 제거, TBP에 의한 용매추출, 염산에 의한 탈거 공정을 거쳐 Pt-Chloride-$H_2O$ 계 백금용액을 용액을 제조하고, 이 용액을 원료로 액상 아민화 반응을 통해 아민산 백금용액을 제조한 다음, 카본블랙의 연소반응에 대한 촉매 활성을 실험함으로써, 백금족 폐스크랩으로부터 고부가 백금족 화합물의 제조가능성을 연구하였다.

CIGSe₂ 박막태양전지용 Mo 하부전극의 물리·전기적 특성 연구

최승훈,박중진,윤정오,홍영호,김인수,Choi, Seung-Hoon,Park, Joong-Jin,Yun, Jeong-Oh,Hong, Young-Ho,Kim, In-Soo 한국진공학회 2012 Applied Science and Convergence Technology Vol.21 No.3

CIGS 박막 태양전지 기판소재인 소다라임유리 표면에 플라즈마 전처리 후 DC 마그네트론 스퍼터링 방법으로 Mo 박막을 제조하였다. 증착압력과 증착시간 변화에 따른 Mo 박막의 물리적, 전기적 특성을 분석하였고, 셀렌화 처리 조건에 따른 $MoSe_2$ 생성 여부와 경향성을 연구하였으며, Mo 박막 두께에 따른 AZO/i-ZnO/CdS/CIGS/Mo/SLG 구조의 태양전지를 제조하여 그 특성을 분석 및 평가하였다. 증착압력이 4.9 mTorr에서 1.3 mTorr로 감소할수록 치밀하고 결정입자 사이의 공극이 적고, 증착속도가 감소하고 전기저항도가 낮은 Mo 박막이 증착되었다. 증착온도가 상온에서 $200^{\circ}C$로 증가할수록 Mo 박막은 치밀한 구조를 가지고 결정성은 향상되어 면저항이 낮게 나타났다. 셀렌화 시간이 길어질수록 Mo 박막 층은 줄어들고, $MoSe_2$ 층 생성두께가 커지는 것을 알 수 있었고, 열처리로 인해 결정화 되면서 전체 박막의 두께가 줄어들었으며, $MoSe_2$ 층의 배양성은 c축이 Mo 표면과 수직 방향으로 성장된 것을 알 수 있었다. Mo 박막의 두께가 1.2 ${\mu}m$와 0.6 ${\mu}m$인 AZO/i-ZnO/CdS/CIGS/Mo/SLG 구조로 이루어진 CIGS 박막 태양전지를 제조하였다. Mo 박막의 두께가 1.2 ${\mu}m$일 때 보다 0.6 ${\mu}m$일 때 CIGS 박막 태양전지의 변환 효율은 9.46%로 비교적 우수한 특성을 나타났다. CIGS 박막 태양전지에서 하부전극인 Mo 박막 특성은 유리기판 및 광흡수 층과의 계면 형성 따라 큰 영향을 미친다는 것을 알 수 있었고, 유리기판의 플라즈마 처리와 Mo 박막의 두께조절로 Na 효과 및 $MoSe_2$층 형성 제어함으로써 CIGS 박막 태양전지의 특성 개선에 효과를 가질 수 있었다. In this Study, Mo back electrode were deposited as the functions of various working pressure, deposition time and plasma per-treatment on sodalime glass (SLG) for application to CIGS thin film solar cell using by DC sputtering method, and were analyzed Mo change to $MoSe_2$ layer through selenization processes. And finally Mo back electrode characteristics were evaluated as application to CIGS device after Al/AZO/ZnO/CdS/CIGS/Mo/SLG fabrication. Mo films fabricated as a function of the working pressure from 1.3 to 4.9mTorr are that physical thickness changed to increase from 1.24 to 1.27 ${\mu}m$ and electrical characteristics of sheet resistance changed to increase from 0.195 to 0.242 ${\Omega}/sq$ as according to the higher working pressure. We could find out that Mo film have more dense in lower working pressure because positive Ar ions have higher energy in lower pressure when ions impact to Mo target, and have dominated (100) columnar structure without working pressure. Also Mo films fabricated as a function of the deposition time are that physical thickness changed to increase from 0.15 to 1.24 ${\mu}m$ and electrical characteristics of sheet resistance changed to decrease from 2.75 to 0.195 ${\Omega}/sq$ as according to the increasing of deposition time. This is reasonable because more thick metal film have better electrical characteristics. We investigated Mo change to $MoSe_2$ layer through selenization processes after Se/Mo/SLG fabrication as a function of the selenization time from 5 to 40 minutes. $MoSe_2$ thickness were changed to increase as according to the increasing of selenization time. We could find out that we have to control $MoSe_2$ thickness to get ohmic contact characteristics as controlling of proper selenization time. And we fabricated and evaluated CIGS thin film solar cell device as Al/AZO/ZnO/CdS/CIGS/Mo/SLG structures depend on Mo thickness 1.2 ${\mu}m$ and 0.6 ${\mu}m$. The efficiency of CIGS device with 0.6 ${\mu}m$ Mo thickness is batter as 9.46% because Na ion of SLG can move to CIGS layer more faster through thin Mo layer. The adhesion characteristics of Mo back electrode on SLG were improved better as plasma pre-treatment on SLG substrate before Mo deposition. And we could expect better efficiency of CIGS thin film solar cell as controlling of Mo thickness and $MoSe_2$ thickness depend on Na effect and selenization time.

오산화바나듐의 수소 환원에 의한 이산화바나듐의 제조 및 열변색 특성

최승훈,이춘부,Choi, Seung Hoon,Lee, Chun Boo 한국자원리싸이클링학회 2017 資源 리싸이클링 Vol.26 No.5

이산화바나듐은 적외선 투과를 차단하거나 창을 통해 건물 내부열 손실을 막아주는 광선택적 유리코팅 소재로 알려졌는데, 본 연구에서 이와 같은 열변색 특성을 가진 이산화바나듐을 수소와의 환원반응을 통하여 제조하는 방법에 대해 연구하였다. 환원반응에 의한 이산화바나듐의 제조는 반응이 쉽게 진행되고, 스퍼터, 빔 증발기 등과 같은 반도체 장비가 필요 없이 공정이 단순하고 대량생산에 용이한 장점을 갖고 있는데, 본 연구에서 수소와의 환원반응에 대한 반응온도, 반응시간, 환원가스의 농도 및 사후 열처리 조건, 첨가제로서 텅스텐의 첨가 등에 대해 실험을 수행하였으며, 최적조건을 도출하여 제조된 이산화바나듐 분말의 특성과 열변색 특성에 대해 조사하였다. 본 연구를 통해 개발된 이산화바나듐이 전자소재 및 에너지 저감 소재로서 많이 활용될 것으로 기대되고 있다. Vanadium Dioxide has been investigated for use as a "spectrally-selective" window coating to block infrared transmission and reduce the loss of building interior heat through windows. The preparation of thermochromic $VO_2$ powder by the reductive reaction with hydrogen was studied. The reductive reaction method has many advantages of easy and mass production of $VO_2$ powder according to controlled reaction without semi-conductor equipments like sputter and beam evaporator. The reaction temperature, time, concentration of reductive gas, post-annealing condition and W addition as dopant would affect the characterization of $VO_2$ powder and its thermochromism. Many applications for electrical device and energy-saving technologies is expected.

소아악성고형종의 진단에 있어서 chimeric transcript의 유용성

최승훈,Choi, Seung-Hoon 대한소아외과학회 1999 소아외과 Vol.5 No.1

Pediatric solid tumors have many histologic similarity. These tumors contained small round cell types, and cause frequent diagnostic problems in pediatric pathology. An important advance in the differentiation of these small round cell tumors has been the identification of consistent chromosomal translocations associated with several types of tumors. Eighteen patients with soft tissue sarcoma were available for review. Seventeen cell lines were also included in this study. The RNA from the specimens were analyzed by reverse transcriptase-polymerase chain reaction (RT-PCR). PAX3-FKHR fusion was present in four of five alveolar rhabdomyosarcoma and PAX7-FKHR fusion was detected in one of five alveolar rhabdomyosarcoma. None of the specimens expressed more than one chimeric transcript. EWS-FLI1 or EWS-ERG fusions were detected in all seven Ewings' sarcoma. No specimens showed EWS-WT1 fusion. These results corresponded well to the histopathologic diagnosis. There were no differences in the histologic appearances of tumors with the more frequent PAX3-FKHR or EWS-FLI1 fusions compared with those containing the variant PAX7-FKHR or EWS-ERG fusions. RT-PCR assay for chimeric transcript is a useful tool for rapid and objective diagnosis of pediatric solid tumors. Through these tools, we can approach genetically to the differential diagnosis of undifferentiated small round tumors.

췌장의 유두상 낭성암 2예 보고

최승훈,황의호,Choi, Seung-Hoon,Hwang, Eui-Ho 대한소아외과학회 1995 소아외과 Vol.1 No.1

Two cases with papillary cystic neoplasm of the pancreas are reviewed and discussed. Up to recently, the tumors have been misclassified as nonfunctioning islet cell tumor or carcinoma, acinar cell carcinoma, papillary cystadenocarcinoma, or pancreatoblastoma. It frequently has been managed with aggressive surgery such as pancreatoduodenectomy. The tumors are well encapsulated and the cut surfaces are characteristically solid and hemorrhagic. Ultrasonography and CT scan are the most useful tools for the diagnosis. The neoplasms usually behave like a very low grade malignancy, so complete removal is the treatment of choice for the tumor arising anywhere in the pancreas. We have a boy and a girl who have papillary cystic neoplasm. The boy was 12 years old and the girl was 14 years old. Both underwent distal pancreatectomy and the progress were uneventful. We have a boy and a girl who have papillary cystic neoplasm. The boy was 12 years old and the girl was 14 years old. Both underwent distal pancreatectomy and the progress were uneventful.

『황제내경(黃帝內經)』의 체질론(體質論)

최승훈,Choi, Seung-hoon 사상체질의학회 1998 사상체질의학회지 Vol.10 No.2

One's constitution is formed congenitally and is also acquired, and is relatively stable in its individually manifested function, structure and temperament. It has characteristics of universality, complexity, generality and continuity. It is also manifested in physiological responses and expresses pathologic tendencies including susceptibility. Attempts at understanding constitution has had a long history throughout the world. In Oriental Medicine, the constitution had been acknowledged from the "Huangdi Neijing", which has been a bible in Oriental Medicine for about two thousand years. In many aspects, the "Huangdi Neijing" provides the basis for both basic and practical fields. In order to derive the ideal structure from the "Huangdi Neijing" to Lee Je-ma's(Lee Jayma's) Sasang Constitutional ideas, which can strengthen the understanding of ideal core of Oriental Medicine's constitutional characteristics, the author launched his analysis of the constitutional understandings in the "Huangdi Neijing" as a first step and came to the following: 1. The constitutional understanding in the "Huangdi Neijing" was done both via the physiological responses to heat, pain and acupuncture treatment and the pathologic tendencies via body structure, strength, body heat, courage and obesity. 2. It was recognized that the constitution was formed congenitally and also acquired factors like living conditions including food customs, residents and geographical conditions were explained in detailed. 3. The constitutional typology was suggested both by the general and systematic criterion according to the Yin-yang and the Five phase theories and by single criterion such as obesity, courage and the response to acupuncture treatment. 4. As diagnosis is related to the constitution, courage was adopted for the disease caused by emotions, obesity was for its manifestations of qi and blood, the quantities of qi-blood and Yin-yang in the typology by the Yin-yang and Five phase theories were suggested. 5. In the case of obesity, Yin-yang and Five phase theory, treatment according to the constitutional ideas was mentioned, and their goals were concluded as "being the balancing between Yin and Yang" which means the Yin-yang theory is more practical than the Five phase theory in Oriental Constitutional Medical field. According to the above understandings, the author would like to suggest that the constitutional ideas in the "Huangdi Neijing" based on the Yin-yang theory blossomed via the practical spirit of Zhang Zhong-jing's "Shanghanlun" and at last from Lee Je-ma's(Lee Jayma's) Sasang Constitutional Medicine which realized "the balancing between Yin and yang" through the practical applications of herbal treatments.

시맨틱 웹 기술을 이용한 확장된 특성 모델의 제한조건 검증

최승훈(Seung-Hoon Choi) 한국정보기술학회 2011 한국정보기술학회논문지 Vol.9 No.10

Automated validation technique is essential to apply the feature models in software product line paradigm, and a lot of works on this have been done. Although several approaches to analyse the feature model using ontology are proposed recently, these approaches cannot handle effectively the feature-attribute and attribute-attribute relationships in extended feature models. In this paper, validation of extended feature model based on sematic web technologies including ontology is proposed. Ontology on Meta-model and instances of extended feature models and feature configurations are constructed by OWL(Web Ontology Language). Complex constraints are expressed in SWRL(Semantic Web Rule Languages). The reasoning engine detects the errors making use of these ontology and SWRL rules. Mapping from complex constraints to SWRL rules is key part of this paper. The approaches in this paper will provide the foundation to develop the feature modeling tool based on ontology.